Gernot, I've used v-brake noodles a couple of times when the cable housing bend was getting too tight. Worked well for me.
Angus On Oct 28, 5:01 pm, Earl Grey <earlg...@gmail.com> wrote: > Hi, > > Has anyone mounted one with a (Tektro) fork crown cable hanger? > (Seehttp://tinyurl.com/ygv9v84for a photo of the hanger) > > I am putting together my new Hillborne, and am using a fork-mounted > cable hanger, at least for now. (I went with the larger frame size, > and actually like my bars relatively low (5 cm of stem showing), so > the cable run to a standard headset-mounted cable hanger is less than > ideal.) > > Here is my question: Is the bolt on the Mini Front rack long enough to > accommodate a 7mm thick "washer" (the cable hanger) as well as an SKS > fender mounting tab in the back on a Hillborne (standard Riv fork > crown)? Has anyone done this? (Mark at Rivendell suggested that it > should work with a recessed brake nut (or a Sheldon nut), but wasn't > sure.) > > Cheers, > > Gernot --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
