Just off the phone with Bryan at Riv. He thought it might be a problem with the Waterford frame; apparently, the folks at Waterford get a bit sloppy with the tolerances. His suggested choices are to use a Thompson seatpost instead of the Nitto or, as Bruce suggested, send the post back to Riv and they'll knurl it. Unfortunately, the latter will take my Hunq out of circulation for 2-3 weeks; before I consider that, I'll check out the Thompson posts and see if there's a local machine shop that'll do my Nitto. Sigh. Nothing's easy. Kevin
On Monday, April 27, 2015 at 12:59:18 PM UTC-4, Bruce Smitham wrote: > > I had the same situation with my Sam Hillborne. I called Brian at Riv and > they were able to knurl the seatpost. Problem solved. You can have a > machine shop do it but I struggled to find that in San Diego. > > Good luck, > > Bruce > > On Monday, April 27, 2015 at 9:31:21 AM UTC-7, James Warren wrote: >> >> >> I'm surprised to hear this. Put calipers on the Nitto then. >> >> >> On Apr 27, 2015, at 9:24 AM, [email protected] wrote: >> >> Someone else was recently complaining about Nitto seat posts not being to >> spec. Better that than the seat *tube *ID!!!! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/rbw-owners-bunch. >> For more options, visit https://groups.google.com/d/optout. >> >> >> James Warren >> [email protected] >> >> - 700x33 >> >> >> >> >> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
