Same here as the rest. I've been running a Shimano DN-71 whatever hub for a couple of years of daily riding in all conditions and it has never let me down. I find the connector very easy to detach for countless tire changes, as long as you install the wires properly at the outset. The SP appears (from photos) to have a similar plug arrangement.
I also have one of the cheapo Sanyo hubs, whose design makes it much more fiddly to remove than the Shimano. KJ On Sunday, March 22, 2015 at 10:04:27 PM UTC-4, joe kelly wrote: > > i got the Shutter Precision SV-8 Dynamo Hub 36h > <http://www.rivbike.com/SP-dyno-hub-p/hu-18202.htm> and B&M Eyc Dyno > Headlight <http://www.rivbike.com/product-p/ltd-16.htm> from rivendell > for christmas. i had the hub built into a wheel here in columbus ohio. the > light/wheel combo worked perfectly in my living room and on a short test > ride, but now a few days later has suddenly stopped working. this is my > first dyno hub/light. anyone have a similar experience or suggestions? > thanks for your time > joe kelly > columbus ohio > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
