Hi Folks, I've had a great run with the Quickbeam, but need to severely downsize and thin the herd. First up for sale is my complete Quickbeam. It's obviously been ridden a fair amount but remains in very good condition. Everything's original except for saddle (VO sprung), bars (Nitto Dirtdrop RM013, 52 cm wide), and brake levers (Tektro Ergo style). I've also added a White Ind 17/19 freewheel.
Known issues: Early on, I used a cheap no-name fixed cog with a pretty narrow number of threads. After a few rides, and one with lots of climbing, the threads stripped. Lesson learned about cheap fixed cogs! I was able to subsequently use a freewheel on this same side with no issues. Of course the opposite side of the hub is fine for either fixed or freewheel. There is a small dent in the headtube just below the headbadge. I think it had to be there originally, because there is no damage to the paint, and I certainly don't recall contact with anything which would have caused it. It's only noticeable when the light hits it just right. See the three photos of the headtube area. There is another small paint chip on the upper left seat stay. See photo. Extras include an HPX pump which I rattle can painted to a very close match. SKS fenders 45mm wide, and a pair of gold colored bottle cages. PHOTOS: https://flickr.com/photos/55639583@N04/sets/72157650979316748 I'm asking $1000 (PayPal) which includes shipping to the CONUS. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
