I've had this 5 gallon Safety Klean solvent tank since 1985.It's good size for bike parts cleaning, including hubs mounted on wheels . Has an easy change filter and last time I checked they will exchange the reservoir with fresh cleaner fluid. The reservoir separates from the top and is easily exchanged when it gets dirty. The fluid drains back into the reservoir when turned off and I haven't noticed any fumes when not in use. It's nice to have a small air compressor to blow dry your parts (do it outside) immediately after cleaning to remove all solvent and adding new lubricant if doing so. http://safety-kleen.com/products-services/parts-cleaning-technologies/solvent-parts-washer/manual/model-14 Jon
On Tuesday, February 24, 2015 at 11:35:22 AM UTC-7, Jim Bronson wrote: > Does anyone have a solvent tank for drivetrain parts cleaning? That seems > like the ultimate solution for cleaning greasy parts. It would be nice to > have two chains and just leave one in there all the time. > > The drawbacks are, potential fumes in an enclosed area and they're > expensive. > > I found this one on Amazon but it's $205... > > http://www.amazon.com/Gallon-Pressure-Cleaner-Solvent-Electric/dp/B0029443HG > > Plus 20 gallons of solvent, may put this in the category of "maybe someday" > > I also do some work on my cars though and it would be nice to have for > that as well. So maybe the dual use will justify it ;) > > -- > Keep the metal side up and the rubber side down! > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
