Hi Amit, I bought one of those flat-but-bent-back Nitto bars from Jitensha several years ago. It's got the red Nitto heat-treat band around it, like the $65 unavailable one on the Jitensha Studio site. I wanted more room outside the last bends, so I made some press-fit solid 6061 aluminum extensions, coated the press-in parts with Houshold (Hogar) glue that GP had recommended for attaching cork grips, and pressed them in. So mine is about 1-1/2" longer on both ends than as-received. I installed that bar with a Dirt Drop stem in a 1987 Schwinn Sierra frame. After a few weeks I didn't like the wrist position, so I replaced the above with an early Stumpjumper riser bar/double clamp stem combo. That's what stuck. If I was you, though, I wouldn't trust somebody else's modified handlebar. At a minimum, I would cut off that hack's extensions and see what I had left. it's pretty narrow like that, though. Thanks for plowing through my story! Please respond if you still want it. Ben
On Tuesday, February 10, 2015 at 1:55:26 AM UTC-5, Amit Singh wrote: > For the Quickbeam! > > Let me know if you've got one available for purchase please, and thanks! > > Amit > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
