That’s a really great install, John! From: rbw-owners-bunch@googlegroups.com [mailto:rbw-owners-bunch@googlegroups.com] On Behalf Of John Philip Sent: Sunday, November 09, 2014 2:10 PM To: rbw-owners-bunch@googlegroups.com Subject: [RBW] Re: Nitto big front rack q / hello
I've done this twice using straight struts to the upper eyelets. See here: https://www.flickr.com/photos/cnyriv/15564057929/ A bit fiddely to set up at first but once done, easy on easy off. Enjoy that Hunq! John On Saturday, November 8, 2014 8:15:14 PM UTC-5, drew beckmeyer wrote: Hey, I'm new here, but this group has already been a great resource. I've been building up my new hunqapillar, and have come to front rack attachment. I've seen posts where the big front rack has been attached without p-clamps. For some reason, those methods didn't really work for me. I ended up attaching the rack without the clamps but somewhat differently than I've seen before. Lower fork eyelets attached to rack via struts attached to the inside of the fork. So here are my questions: Is it a problem to attach the struts to the inside of the fork (about 1cm of clearance on each side between bolt and spoke)? Is it an issue that the points of connection to the fork are the dropout eyelets and the lower mid-fork mounts? Would it be more stable with the second attachment to the higher mounts? Am I stressing anything too much? Etc etc etc. Pics should be attached. Thanks in advance -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com<mailto:rbw-owners-bunch+unsubscr...@googlegroups.com>. To post to this group, send email to rbw-owners-bunch@googlegroups.com<mailto:rbw-owners-bunch@googlegroups.com>. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout. ------------------------------------------------------------------------------ **************************************************** This email (and any attachments thereto) is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this email, you are hereby notified that any dissemination, distribution or copying of this email (and any attachments thereto) is strictly prohibited. If you receive this email in error please immediately notify me at (212) 735-3000 and permanently delete the original email (and any copy of any email) and any printout thereof. Further information about the firm, a list of the Partners and their professional qualifications will be provided upon request. **************************************************** ============================================================================== -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
