I currently am using 55mm SKS Velo Cross fenders. These are shorter fenders without stays (although you can add some). I opted for these because I have two sets of wheels, currently one with Big Bens and one with B-Lines, and the fit is ok with either. I also have a pair of SKS 55 mm conventional fenders that I formerly had on this bike until I had started using Quasi Motos. If I extended the fender to the ends of the stays they would just fit but with little clearance by the side lugs (and the fender line was quite ugly). I just measured the fender edge to edge chord at 59mm. As my Big Bens only measure 48 mm on Synergy rims, they might fit decently with the 55mm conventional fender. Here is a picture of my Rawland with Big Bens. I made a little extension of the front of the rear fender with duct tape for better coverage. -Pete
http://i22.photobucket.com/albums/b331/olsonps/P9190217c.jpg On Monday, September 29, 2014 10:24:04 PM UTC-5, Meade Anderson wrote: > > Has anybody tired a fender to cover these rubber critters? The tires are > big as I just mounted one for testing purposes and needless to say they > ain't going to roll with my current Honjo's. I was thinking maybe one of > the Planet Bike fenders would work but am welcoming any experience or > insight into covering these big rubbers... > > thanks > > meade > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
