what kind of rim is that, Ron? On Tue, Sep 30, 2014 at 9:36 AM, Ron Mc <bulldog...@gmail.com> wrote:
> I even slide a pair of o-rings over my slick valve stems to save them from > shock and even act a bit as dust covers > > > <http://img.photobucket.com/albums/v728/bulldog1935/Raleigh/700c/07b78979-3a71-4c72-b2c3-4eb4e87f8201.jpg> > > > On Tuesday, September 30, 2014 9:28:07 AM UTC-5, Ron Mc wrote: >> >> Brian, I think most decaleur designs, with steel rods sliding through >> steel tubes, have a tendency to rattle with road shock and vibration. >> You may try sliding o-rings up the rods to dampen the contact point at >> the top end of the tubes (like when you put your finger on a ringing bell). >> >> If you look at my Bertaud decaleur photo, you can make out a green o-ring >> I place on the rod between the clevis tubes. >> I like using o-rings, grommets, leather washers, vinyl tape to dampen out >> noisy spots. >> >> >> <http://img.photobucket.com/albums/v728/bulldog1935/Raleigh/700c/aP2050003.jpg> >> >> >> On Tuesday, September 30, 2014 8:58:23 AM UTC-5, Brian Campbell wrote: >>> >>> I just put a large Acorn Rando bag and VO Decaleur on my 61cm Hilsen. I >>> put the second strut on the Mark's rack and so, far it seems to be working >>> fine. I noticed that it can rattle a bit and that has me wondering if I >>> have don e the install correctly? Thoughts? >>> >>> >>> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- Keep the metal side up and the rubber side down! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
