On Fri, Sep 18, 2009 at 5:30 PM, Dave Craig <[email protected]> wrote:
>
> The bolt you are looking for is a stainless metric M10 bolt with a
> 1.50 pitch, That will save you some running around - by knowing that
> info you can call ahead. Usually Tru value and Ace Hardware stores
> have the bolts you'll need available singly. I think the last time I
> did this, I used a 35 or 40 mm bolt. With that length in mind, here's
> how I assemble it:
>
> I thread a lock washer (split washer) and then a fender washer onto
> the bolt. Then, I place the kickstand up against the bottom of the
> mounting plate, insert the bolt through the plate and screw it into
> the kickstand. It is easier and faster to do this without a fender and
> tire mounted. The bolt will screw through the kickstand and extend a
> bit underneath the bike. Snug it up firmly. Lastly, as a "belt and
> suspenders" measure, I place a washer (regular, NOT fender) onto the
> exposed threads and I then screw a stainless nylock nut onto the bolt
> while keeping the bolt from turning. If that's too obsessive for ya,
> get a 25 or 30 mm bolt and just use the upper fender washer and split/
> lock washer. Instead of grease, use blue locktite to coat the threads
> before assembling. It does a better job at keeping the bolt from
> loosening.
>
> I've posted some crazy long diatribes on kickstand mounting in this
> group. Do a search for my posts and you'll find more info than is
> really necessary
>

Went to ace hardware. Found what I needed given your instructions.
seems to be working great and I no longer have to take off my
kickstand in order to remove my fender. :)

Thank you,
-sv

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to