Around 1998, Grant set me up with a Sugino AT and a 115 spindle for use as a single (remember when Riv used to sell cool old NOS parts?). I believe I used a 3mm spacer to get clearance where the chainring bolts mount. This was for use with a 126mm rear hub. I'm not sure if a modern 130/135mm spacing would need a little more clearance at the crank.
On Friday, April 4, 2014 4:14:33 PM UTC-7, David Banzer wrote: > > "Then I went to a Sugino AT with a 122 spindle and ring on the outside." > > That's interesting, I happen to have a Sugino AT and a Tange 122.5 bottom > bracket sitting in the parts bin right now. Looks like I'll be able to > setup the Redwood and go for a ride this weekend. > David > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
