Very nice! Thanks for the pics! John
On Monday, March 17, 2014 11:51:14 AM UTC-7, Ron Mc wrote: > > Jim and Minh, I have some good photos here where I tapped a Gino light > mount to M6 so I could fit it to a Nitto strut with the rod bolt and nut > https://plus.google.com/109016132995287077684/posts/gcMdRiT3N4C > > On Monday, March 17, 2014 1:31:01 PM UTC-5, Minh wrote: >> >> Jim, >> >> Ron has pointed you to the part, it's not notched to go against the >> strut, there is a hole and the strut goes through it, so this only works >> with racks where the struts are bolted down so you can slide the nut >> through the strut. >> >> >> On Monday, March 17, 2014 11:57:26 AM UTC-4, Jim Bronson wrote: >>> >>> What about the other washer in the picture that is notched to press >>> against the strut? >>> >>> >>> On Sat, Mar 15, 2014 at 5:01 AM, blakcloud <blakc...@gmail.com> wrote: >>> >>>> Serrated washer with a Sheldon Brown fender nut by Problem Solvers. The >>>> washer you see comes with the Nitto rack as part of the hardware. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "RBW Owners Bunch" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to rbw-owners-bun...@googlegroups.com. >>>> To post to this group, send email to rbw-owne...@googlegroups.com. >>>> Visit this group at http://groups.google.com/group/rbw-owners-bunch. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> Keep the metal side up and the rubber side down! >>> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
