Hi just looked at my rackstruts, they are for brakebolt, one angled for the front, one for the back, may be they changed it in between but i know the under the forkkrown possibility only from VO. Why don't you try to hammer yor brakeboltstrut flat, should be possible or take the VO one for 3.75 but it must also be bent and drilled.
On Jun 25, 2:42 am, rb <ronald.blument...@gmail.com> wrote: > Hi - I am moving a "Mark's rack" from one bike to another....I need > the flat bracket that goes from the rack to underneath the fork crown > (I have the bracket that goes to the brake bolt). I know it came with > that, I've installed 3 of these on various bikes, but I can't find one > of the flat brackets in any of my various bins... > > So I am hoping that there is someone out there who might have one > sitting around and would be willing to part with it.... > > I did make up an ugly one from some galvanized flat stock, but it's a > poke in the eye - would be nice to have the proper fitting. I can't > mount to the brake bolt on this bike because it's an undrilled fork / > canti posts, but no hole (an odd frame to be sure). > > many thanks --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
