I've wanted to install a narrow-profile, pannier-compatible rack like
the Tubus Fly or Luna for commuting on my AHH, but was worried about
fitment with that mono-stay.  It seemed like a shame to let those seat
stay braze-ons go to waste, and bending and cutting the mono-stay to
fit was pretty intimidating.  I bought a Luna from Wayne at
TheTouringStore.com (who is great, by the way), and then stared at it
for a couple of weeks.  I considered bringing it to one of the local
bike shops, but then last night I just went for it.  Installation
wasn't nearly as bad as I thought.  The rack comes with a steel tab
that you can use to bridge the aluminum mono-stay to the rear brake
bolt.  This tab comes slightly pre-bent, so it's easy to finish the
job.  I clamped it in a vice by the wide end, and pounded the narrow
end to 90 degrees.  Easy.  I then unbolted the rear brake, removed the
last aluminum spacer (behind the thin fender mount), and replaced it
with the 90 degree tab.    Then I mounted the rack to the second set
of eyelets on the rear dropouts (using the included black aluminum
spacers to avoid interfering with the fender stays), tilted the rack
level, and kind of eye-balled what how much the aluminum mono-stay
would have to be bent and cut.  I took off about 4 inches with a
hacksaw, clamped resized mono-stay in the vice, and bent it.  Held it
up to the rack / 90 degree tab, then clamped it in the vice again and
bent it a little more.  Perfect.  I sanded the edges of the cut stay,
installed it, and done.  Not nearly as bad as I thought, and the whole
process took about 1 hr.  I'll post pictures later.

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to