Can you put a little 'dimple' in either side of the fender to give some brake arm clearance?
Bill On Feb 22, 3:47 pm, Mike <mjawn...@gmail.com> wrote: > I put some 40mm wide Berthouds on my Rambouillet with has Shimano > brakes. The fenders fit and with more than enough clearance for my > Ruffy Tuffys. The only problem is that when the front brake is engaged > it pushes on the fender which comes closer to the tire. The fender is > not rubbing on the tire, there is plenty of clearance. Still, it's > annoying. I tried mounting the fender lower from the brake arch but > that didn't solve the problem like I thought it would. The wheel is in > mounted correctly and straight. I know there are plenty of you out > there with Rambouillets/Romulus' with Berthouds and Shimano brakes, do > you folks have this problem. > > The fenders look nice and allow much better coverage than the SKS P45s > I had on there before. if I remember correctly there was some fender > movement with those which I just got used to. > > Thanks in advance for any suggestions. By the time I get some of these > for my AHH I'll be a pro at mounting them. > > --Mike --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
