No, I have the phil BB centered. I am running the xd2 as a double, but I have plenty of room to add a granny if I desired.
I don't know, but I'm staking my money on a difference between the new models and the old. I can't say anything more, as I haven't compared them closely. erik On Mon, Feb 2, 2009 at 3:46 PM, Jim Thill - Hiawatha Cyclery < thill....@gmail.com> wrote: > > Erik: > I assume your Phil BB is offset to the right a few mm. That would make > the right side equivalent to a symmetrical 113-ish BB. Unfortunately, > most BBs can't be offset like Phil BBs can be. > Jim > > On Feb 2, 3:32 pm, erik jensen <radiophonicworks...@gmail.com> wrote: > > Again, I run a 108mm phil on my atlantis. > > no problems with a crown logo xd2. > > > > maybe a change occured with the introduction of the kickstand plate? > > > > not enough clearance any longer? > > > > On Mon, Feb 2, 2009 at 3:17 PM, Doug Peterson <dougpn...@cox.net> wrote: > > > > > Jim: > > > > > Something's still not quite right. Just copied from Riv's website a > minute > > > ago: > > > > > Rivendell models except the Atlantis: 113mm. The Atlantis: 107mm. > > > > > dougP > > > > > I wasn't sure if I actually posted this link, but the RBW-rec for the > > > Atlantis was changed to 110-113 in 11/07 > > > > >http://groups.google.com/group/rbw-owners-bunch/web/bb-spindle-lengths > > > > > - Jim > > > > > -- > > > Jim Edgar > > > cyclofi...@earthlink.net > > > > > Cyclofiend Bicycle Photo Galleries -http://www.cyclofiend.com > > > Current Classics - Cross Bikes > > > Singlespeed - Working Bikes > > > > > The Gallery needs your photos! Send 'em in - Here's how: > > >http://www.cyclofiend.com/guidelines > > > > > "She edged in to get a better look at the bike, how it was made, the > > > intricacy of its brakes and shifters pulling her straight in. Beauty." > > > -- William Gibson, "Virtual Light" > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
