This may come too late for your handlebar switch, but my experience
may help. I own two 60cm Quickbeams, one with a 9cm Nitto Technomic
Deluxe stem and Nitto 46cm Noodle bars, and the other with a 12cm
Nitto Technomic Deluxe stem and Nitto Albatross bars (the wide
aluminum ones). I find that the fit on both is perfect for me. The
Albatross bar requires a longer stem because it extends back further
than the Noodle, and because it sets higher--which effectively
shortens the reach (because of the headtube angling back towards you).
I also found that the Albatross-bared QB was better with a Brooks B72
rather than the B17 as on the Noodle-bared one. BTW, the stem height
is set about the same on both but the Albatross bars are higher
because of the bar geometry.

Rob

On Aug 21, 11:22 am, "J. Burkhalter" <[EMAIL PROTECTED]> wrote:
> Hey all,
>
> I'm in the process of giving the Atlantis an overhaul of sorts, and
> part of the change involves moving the Noodles to another bike and
> getting some Albatross bars for the Atlantis.  With the Noodles, I
> have a 7cm Nitto Technomic Deluxe stem set at saddle height and the
> whole setup fits great.  My question is for those of you who have made
> a similar swap.  Did you change stems, and if so, from what to
> what?
>
> On my GF's Long Haul Trucker, we swapped the stem for one with a
> longer reach when we put the Albatross on there.  Works great for her,
> although the bar end shifters sometimes poke my knees on slow speed
> turns.  I intend to use some Paul Thumbies so I'm less worried about
> shifter/knee interference, and more concerned about having a overly
> cramped cockpit.
>
> I'm guessing a move to a 10 or 11 cm stem may work (based on some
> quick and dirty measurements of her bike).  Any thoughts?
>
> Thanks!
> -Jay
> Asheville, NC

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to