On 03/04/2011 09:37 PM, Augusto Cabrera wrote:
> Hi, I have a problema with conection AAA
> Please helpme
>
> Fri Mar 4 14:34:03 2011: DEBUG: Response type 13
> Fri Mar 4 14:34:03 2011: DEBUG: Certificate Subject Name is /name=Root CA
> certificate
> Fri Mar 4 14:34:03 2011: INFO: EAP TLS client certificate subject /name=Root
> CA certificate does not match user name 5c4ca9e2b858 or identity
> wimax@wimaxtest
> Fri Mar 4 14:34:03 2011: INFO: EAP TLS certificate verification failed:
> application verification failure, 7236:
The EAP-TLS configuration you are using tries to check the client
certificate Subject against the User-Name attribute or EAP Identity. The
check is tried against the CN part of certificate subject which your
certificate appears not to have making the check impossible to match.
You should take a good look at goodies/eap_tls.cfg and see the examples
there. See also the reference manual doc/ref.pdf for more information
about the settings in the example configuration.
There is also a setting that lets you disable username check,
EAPTLS_NoCheckId, but please check the reference manual for it and
related EAP-TLS settings first.
Thanks!
Heikki
> Code: Access-Request
> Identifier: 204
> Authentic: <0><0>Q<254><0><0>!<15><0><0>h<196><0><0><30><28>
> Attributes:
> User-Name = "wimax@wimaxtest"
> NAS-IP-Address = 3.3.3.3
> Calling-Station-Id = "5c4ca9e2b858"
> NAS-Identifier = "WASN9770"
> Event-Timestamp = 1299267273
> EAP-Message =
> <2><228><3>,<13><0><22><3><1><1><208><11><0><1><204><0><1><201><0><1><198>0<130><1><194>0<130><1>+<160><3><2><1><2><2><2><1><17>0<13><6><9>*<134>H<134><247><13><1><1><4><5><0>0<30>1<28>0<26><6><3>U<4>)<19><19>Root
> CA
> certificate0<30><23><13>050926120100Z<23><13>260926120100Z0<30>1<28>0<26><6><3>U<4>)<19><19>Root
> CA
> certificate0<129><159>0<13><6><9>*<134>H<134><247><13><1><1><1><5><0><3><129><141><0>0<129><137><2><129><129><0><165>\H<190>F<26><146><149>m<165><145><249>7<19><11>5si<130><143><240><188><153><142><254>j<203><30><26><229><129><186><137><231><210><156><235><237>/<210>u<156><197>+<178>B<161><185>\<140><133><194>C~<190><246><151><170><202><148>7<194><24>B<244>nd<157><225>)<236>'<193><160>p
> EAP-Message =
> <129><28><207><200>!<194>yyg<158><254>o<153><18>b<198><239><162><163>}"RM<232><208>c<196>3<145>soy<31><168>6<137>KMf<205><133>W<204>6*<186><143>9E<165><18><156><207><2><3><1><0><1><163><15>0<13>0<11><6><3>U<29><15><4><4><3><2><1><142>0<13><6><9>*<134>H<134><247><13><1><1><4><5><0><3><129><129><0>7c<18><232><251><238><239><171><142><14>r(<146><20><172><202><132><211><244>\<202><12><162>y<149>r<220><146><213><225><138><24>%:<236><230>hI<221><165>e<171>cw<133><151>2<14><136><156>s<157>
>
> <6>|<165><232><150>V<250>Q=<204><159><143><184>8<227><186><<202><130><180>J<233><28>_GJ;<164><167><228><201>YQ<131><127><242>|<205><140>,:>X!<229><131><218><179><148><20>]~<250><220><217><19>.<162><178><8>6<5>_<173>k!9o`t{<250>K<129><229><22><3><1><0><134><16><0><0><130><0><128>C<234><17><183>x<13>
> <234><200>(<203>.PI<171><20>*C<149><160>
> EAP-Message =
> "<29><152><238>4r<31>4<216><231>@|<10><249><170><199><249>f<30><252><178>T<132>&<17><161>(<209><211><7><6>FP<193><230>P\,<180>)<165>a<224><156>&<1><229><155><239>Y<166><14><200><19>c<167><24><248><5><237>,P<189><151><163>0<249>'<156><186>?<24><139><189><252>w<13>l<236><14><200>{<5><207><196>$^:<214>}r<211>9<207>9A<161><173>q<226><185>SFk<254>'<185><203><22><3><1><0><134><15><0><0><130><0><128><145>1<178>Z<131>"<182><244><27>j<222>Uy`<153><190><25>c<142><221><234><200><232>G<217><187>2:<244><155><178><197><170><255>7<5>J<204><11><202>f<244><153><150><136>o<218><146><145>G<182><204>6R<220><135><166>&(<208><130><251>Q<137>`RP<129>V$$<233>}<224>[6<204><161><159>G<15><246>s<238>W%<243><228>T(<225><179><[<145><24><208>f<224><yO<201><236><133><201><11>8<226><246><239><243>l<150>2<12>?zJ<179><240>XA'wJ<188>3<20><3><1><0><1><1>
> EAP-Message =
> <22><3><1><0>0biuJ<145><196>I<177><13><245><133><4>#<27>|<172><250><239><133><254><206><17>B`<29><19>v9<148><138>o<194><12><187>eX<5>:<240><184><190><245><252><250><29><143><253>%
> WiMAX-Capability = <1><5>1.1<2><3><2><3><3><1><5><3><1><4><3><1>
> WiMAX-BS-ID = 00000203f120
> WiMAX-GMT-Timezone-Offset = -18000
> NAS-Port-Type = Wireless-IEEE-802.16
> WiMAX-PPAC = <1><6><0><0><0>c
> Service-Type = Framed-User
> Message-Authenticator =
> <226><162>X<134><21><255><199>zX7<16>q<176><250><250><251>
>
> Fri Mar 4 14:34:03 2011: DEBUG: Handling request with Handler
> 'Realm=DEFAULT', Identifier ''
> Fri Mar 4 14:34:03 2011: DEBUG: Deleting session for wimax@wimaxtest,
> 3.3.3.3,
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with Radius::AuthSQL:
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with Radius::AuthSQL:
> Fri Mar 4 14:34:03 2011: DEBUG: Query is: 'select reason from blacklist
> where nai='5c4ca9e2b858'':
> Fri Mar 4 14:34:03 2011: DEBUG: Radius::AuthSQL looks for match with
> 5c4ca9e2b858 [wimax@wimaxtest]
> Fri Mar 4 14:34:03 2011: DEBUG: Radius::AuthSQL REJECT: No such user:
> 5c4ca9e2b858 [wimax@wimaxtest]
> Fri Mar 4 14:34:03 2011: DEBUG: Query is: 'select reason from blacklist
> where nai='DEFAULT'':
> Fri Mar 4 14:34:03 2011: DEBUG: AuthBy SQL result: ACCEPT, No such user
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with EAP: code 2, 228, 812, 13
> Fri Mar 4 14:34:03 2011: DEBUG: Response type 13
> Fri Mar 4 14:34:03 2011: DEBUG: Certificate Subject Name is /name=Root CA
> certificate
> Fri Mar 4 14:34:03 2011: INFO: EAP TLS client certificate subject /name=Root
> CA certificate does not match user name 5c4ca9e2b858 or identity
> wimax@wimaxtest
> Fri Mar 4 14:34:03 2011: INFO: EAP TLS certificate verification failed:
> application verification failure, 7236: 1 - error:140890B2:SSL
> routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned
>
> Fri Mar 4 14:34:03 2011: DEBUG: EAP result: 3, EAP TLS Challenge
> Fri Mar 4 14:34:03 2011: DEBUG: AuthBy WIMAX result: CHALLENGE, EAP TLS
> Challenge
> Fri Mar 4 14:34:03 2011: DEBUG: Access challenged for 5c4ca9e2b858: EAP TLS
> Challenge
> Fri Mar 4 14:34:03 2011: DEBUG: Packet dump:
> *** Sending to 3.3.3.3 port 10008 ....
>
> Packet length = 57
> 0b cc 00 39 d4 a9 9e c5 5e b8 b8 45 0c 9a c8 7f
> 0b fa 43 c4 4f 13 01 e5 00 11 0d 80 00 00 00 07
> 15 03 01 00 02 02 28 50 12 f8 10 53 b9 59 78 52
> 8f 41 63 1b 33 98 a7 e9 eb
> Code: Access-Challenge
> Identifier: 204
> Authentic: <212><169><158><197>^<184><184>E<12><154><200><127><11><250>C<196>
> Attributes:
> EAP-Message = <1><229><0><17><13><128><0><0><0><7><21><3><1><0><2><2>(
> Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>
> Fri Mar 4 14:34:03 2011: DEBUG: Rewrote user name to wimax@wimaxtest
> Fri Mar 4 14:34:03 2011: DEBUG: Rewrote user name to wimax@wimaxtest
> Fri Mar 4 14:34:03 2011: DEBUG: Packet dump:
> *** Received from 3.3.3.3 port 10008 ....
>
> Packet length = 186
> 01 cd 00 ba 00 00 14 32 00 00 0b 28 00 00 49 cc
> 00 00 02 70 01 11 77 69 6d 61 78 40 77 69 6d 61
> 78 74 65 73 74 04 06 03 03 03 03 1f 0e 35 63 34
> 63 61 39 65 32 62 38 35 38 20 0a 57 41 53 4e 39
> 37 37 30 37 06 4d 71 3e c9 4f 08 02 e5 00 06 0d
> 00 1a 1a 00 00 60 b5 01 14 00 01 05 31 2e 31 02
> 03 02 03 03 01 05 03 01 04 03 01 1a 15 00 00 60
> b5 2e 0f 00 30 30 30 30 30 32 30 33 66 31 32 30
> 1a 0d 00 00 60 b5 03 07 00 ff ff b9 b0 3d 06 00
> 00 00 1b 1a 0f 00 00 60 b5 23 09 00 01 06 00 00
> 00 63 06 06 00 00 00 02 50 12 45 80 24 0c 47 0d
> 24 4b 46 4d bb 3d 45 79 ef 99
> Code: Access-Request
> Identifier: 205
> Authentic: <0><0><20>2<0><0><11>(<0><0>I<204><0><0><2>p
> Attributes:
> User-Name = "wimax@wimaxtest"
> NAS-IP-Address = 3.3.3.3
> Calling-Station-Id = "5c4ca9e2b858"
> NAS-Identifier = "WASN9770"
> Event-Timestamp = 1299267273
> EAP-Message = <2><229><0><6><13><0>
> WiMAX-Capability = <1><5>1.1<2><3><2><3><3><1><5><3><1><4><3><1>
> WiMAX-BS-ID = 00000203f120
> WiMAX-GMT-Timezone-Offset = -18000
> NAS-Port-Type = Wireless-IEEE-802.16
> WiMAX-PPAC = <1><6><0><0><0>c
> Service-Type = Framed-User
> Message-Authenticator = E<128>$<12>G<13>$KFM<187>=Ey<239><153>
>
> Fri Mar 4 14:34:03 2011: DEBUG: Handling request with Handler
> 'Realm=DEFAULT', Identifier ''
> Fri Mar 4 14:34:03 2011: DEBUG: Deleting session for wimax@wimaxtest,
> 3.3.3.3,
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with Radius::AuthSQL:
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with Radius::AuthSQL:
> Fri Mar 4 14:34:03 2011: DEBUG: Query is: 'select reason from blacklist
> where nai='5c4ca9e2b858'':
> Fri Mar 4 14:34:03 2011: DEBUG: Radius::AuthSQL looks for match with
> 5c4ca9e2b858 [wimax@wimaxtest]
> Fri Mar 4 14:34:03 2011: DEBUG: Radius::AuthSQL REJECT: No such user:
> 5c4ca9e2b858 [wimax@wimaxtest]
> Fri Mar 4 14:34:03 2011: DEBUG: Query is: 'select reason from blacklist
> where nai='DEFAULT'':
> Fri Mar 4 14:34:03 2011: DEBUG: AuthBy SQL result: ACCEPT, No such user
> Fri Mar 4 14:34:03 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
> Fri Mar 4 14:34:04 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
> Fri Mar 4 14:34:04 2011: DEBUG: Handling with EAP: code 2, 229, 6, 13
> Fri Mar 4 14:34:04 2011: DEBUG: Response type 13
> Fri Mar 4 14:34:04 2011: DEBUG: EAP result: 1, TLS Alert acknowledged
> Fri Mar 4 14:34:04 2011: DEBUG: AuthBy WIMAX result: REJECT, TLS Alert
> acknowledged
> Fri Mar 4 14:34:04 2011: INFO: Access rejected for 5c4ca9e2b858: TLS Alert
> acknowledged
> Fri Mar 4 14:34:04 2011: DEBUG: Packet dump:
> *** Sending to 3.3.3.3 port 10008 ....
>
> Packet length = 60
> 03 cd 00 3c c5 8a a5 01 f7 42 7b e2 06 16 fa cd
> 43 cf 06 f3 4f 06 04 e5 00 04 50 12 47 d3 77 e5
> 65 83 8e 92 87 5d 5b e2 f6 d8 4c a3 12 10 52 65
> 71 75 65 73 74 20 44 65 6e 69 65 64
> Code: Access-Reject
> Identifier: 205
> Authentic: <197><138><165><1><247>B{<226><6><22><250><205>C<207><6><243>
> Attributes:
> EAP-Message = <4><229><0><4>
> Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
> Reply-Message = "Request Denied"
>
>
> Saludos,
>
> Ing. Augusto Cabrera Duffaut.
> TELECOMUNICACIONES ISP
> Telefono Directo: 4050057
> Ext Interna: 4057
>
>
>
>
> -----Mensaje original-----
> De: Heikki Vatiainen [mailto:h...@open.com.au]
> Enviado el: jueves, 03 de marzo de 2011 3:26
> Para: Augusto Cabrera
> CC: radiator@open.com.au
> Asunto: Re: [RADIATOR] RV: Problem Radiator configuration WIMAX
>
> On 03/03/2011 12:53 AM, Augusto Cabrera wrote:
>
>> Hello Heikky,
>> Thanks for responding, I have the server certificates. Pem and client. Der
>> incurs with openssl
>
> Looks like the certificate problems are solved since the TTLS inner
> authentication is trying to run.
>
>> But I have this problem according to the logs:
>
> Make sure you have Digest-MD4 module installed as described in
> http://www.open.com.au/radiator/install.html
>
> You need this module for MSCHAP and MSCHAPv2.
>
>> ERR: Could not handle an EAP request: Undefined subroutine
>> &Radius::MSCHAP::ASCIItoUnicode called at
>> /usr/lib/perl5/site_perl/Radius/AuthGeneric.pm line 866.
>
> I'd say this is the result of MSCHAP module not working at all since
> Digest-MD4 was not available.
>
>> The logs are:
>>
>> Code: Access-Request
>> Identifier: 27
>> Authentic: <0><0>V<6><0><0>v<31><0><0>n<11><0><0>d<195>
>> Attributes:
>> User-Name = "wimax@wimaxtest"
>> NAS-IP-Address = 3.3.3.3
>> Calling-Station-Id = "00256831312f"
>> NAS-Identifier = "WASN9770"
>> Event-Timestamp = 1299099954
>> EAP-Message = <2><225><0><196><21><128><0><0><0><186><23><3><1><0>
>> <191><10>ZY<162><226><129><185><185>A:~K<235><131>F'Cb<182><225><208>W<242><9><227>v%k,,N<23><3><1><0><144><1>.<238><30><244><14><4>N<0><219><184>3<247><4><8><248><249><217>@3<20><188>}<247><165>m<209><159><25><239><209><11><213><152><222><14><166><250><228><152><166><2><9><220><24>w&<4><15><200><127><163><145><178><165><162><17><203>{<<179><<233><190><227><224><136><31><28>,ed
>>
>> <211><4><157><6><154>u!U<<30><169><174>FX=<200>~<220>N<149><176>0X<12>p<207><217><216><9><175>Kc<18>z<127><187><144><3><134><188><129><253>-(<128><164><189><198>z|7K<231><20><30><129><19><9>(<197>4<196>@<25><221><244><133><198>?k<165>
>> WiMAX-Capability = <1><5>1.1<2><3><2><3><3><1><5><3><1><4><3><1>
>> WiMAX-BS-ID = 00000203f110
>> WiMAX-GMT-Timezone-Offset = -18000
>> NAS-Port-Type = Wireless-IEEE-802.16
>> WiMAX-PPAC = <1><6><0><0><0>c
>> Service-Type = Framed-User
>> Message-Authenticator =
>> <198><156><178>n<247><177><243><137><224><210>L<11><6>NH<244>
>>
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling request with Handler
>> 'Realm=DEFAULT', Identifier ''
>> Wed Mar 2 16:05:20 2011: DEBUG: Deleting session for wimax@wimaxtest,
>> 3.3.3.3,
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthSQL:
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthSQL:
>> Wed Mar 2 16:05:20 2011: DEBUG: Query is: 'select reason from blacklist
>> where nai='00256831312f'':
>> Wed Mar 2 16:05:20 2011: DEBUG: Radius::AuthSQL looks for match with
>> 00256831312f [wimax@wimaxtest]
>> Wed Mar 2 16:05:20 2011: DEBUG: Radius::AuthSQL REJECT: No such user:
>> 00256831312f [wimax@wimaxtest]
>> Wed Mar 2 16:05:20 2011: DEBUG: Query is: 'select reason from blacklist
>> where nai='DEFAULT'':
>> Wed Mar 2 16:05:20 2011: DEBUG: AuthBy SQL result: ACCEPT, No such user
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with EAP: code 2, 225, 196, 21
>> Wed Mar 2 16:05:20 2011: DEBUG: Response type 21
>> Wed Mar 2 16:05:20 2011: DEBUG: EAP TTLS data, 3, 225, 224
>> Wed Mar 2 16:05:20 2011: DEBUG: TTLS Tunnelled Diameter Packet dump:
>> Code: UNDEF
>> Identifier: UNDEF
>> Authentic: UNDEF
>> Attributes:
>> User-Name = "wimax"
>> MS-CHAP-Challenge =
>> T|}M<140><255><165><195><3><211>s<0><186><210><236><152>
>> MS-CHAP2-Response =
>> U<0>!@#$%^&*()_+:3|~<0><0><0><0><0><0><0><0>-<17><2><129><24>*<217><224>V<1><158><209><169><192>&&<20><227><13><10><189><143><215><174>
>>
>> Wed Mar 2 16:05:20 2011: DEBUG: EAP TTLS inner authentication request for
>> wimax
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling request with Handler
>> 'Realm=DEFAULT', Identifier ''
>> Wed Mar 2 16:05:20 2011: DEBUG: Deleting session for wimax, 3.3.3.3,
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthSQL:
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthSQL:
>> Wed Mar 2 16:05:20 2011: DEBUG: Query is: 'select reason from blacklist
>> where nai=NULL':
>> Wed Mar 2 16:05:20 2011: DEBUG: Radius::AuthSQL looks for match with
>> [wimax]
>> Wed Mar 2 16:05:20 2011: DEBUG: Radius::AuthSQL REJECT: No such user:
>> [wimax]
>> Wed Mar 2 16:05:20 2011: DEBUG: Query is: 'select reason from blacklist
>> where nai='DEFAULT'':
>> Wed Mar 2 16:05:20 2011: DEBUG: AuthBy SQL result: ACCEPT, No such user
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
>> Wed Mar 2 16:05:20 2011: DEBUG: Handling with Radius::AuthWIMAX: AAA-WIMAX
>> Wed Mar 2 16:05:20 2011: DEBUG: Query is: 'select psk, cui, hotlineprofile
>> from subscription where nai=?': wimax
>> Wed Mar 2 16:05:20 2011: DEBUG: Query is: 'select profileid,
>> httpredirectionrule, ipredirectionrule, nasfilterrule, sessiontimer from
>> hotlineprofile where id=?': 0
>> Wed Mar 2 16:05:20 2011: DEBUG: Radius::AuthWIMAX looks for match with
>> wimax [wimax]
>> Wed Mar 2 16:05:20 2011: ERR: Could not handle an EAP request: Undefined
>> subroutine &Radius::MSCHAP::ASCIItoUnicode called at
>> /usr/lib/perl5/site_perl/Radius/AuthGeneric.pm line 866.
>>
>> Wed Mar 2 16:05:20 2011: DEBUG: AuthBy WIMAX result: REJECT, Could not
>> handle an EAP request
>> Wed Mar 2 16:05:20 2011: INFO: Access rejected for 00256831312f: Could not
>> handle an EAP request
>> Wed Mar 2 16:05:20 2011: DEBUG: Packet dump:
>> *** Sending to 3.3.3.3 port 10033 ....
>>
>> Packet length = 36
>> 03 1b 00 24 60 fc ea e7 98 51 59 ae 23 eb dc a9
>> ca 25 a7 1f 12 10 52 65 71 75 65 73 74 20 44 65
>> 6e 69 65 64
>> Code: Access-Reject
>> Identifier: 27
>> Authentic: `<252><234><231><152>QY<174>#<235><220><169><202>%<167><31>
>> Attributes:
>> Reply-Message = "Request Denied"
>>
>> Wed Mar 2 16:05:20 2011: DEBUG: Monitor received command: STATS .
>> Wed Mar 2 16:05:21 2011: DEBUG: Monitor received command: STATS .
>> Wed Mar 2 16:05:22 2011: DEBUG: Monitor received command: STATS .
>> Wed Mar 2 16:05:23 2011: DEBUG: Monitor received command: STATS .
>>
>>
>> Saludos,
>>
>> Augusto Cabrera Duffaut.
>>
>>
>>
>>
>> -----Mensaje original-----
>> De: Heikki Vatiainen [mailto:h...@open.com.au]
>> Enviado el: miércoles, 02 de marzo de 2011 16:48
>> Para: Augusto Cabrera
>> CC: radiator@open.com.au
>> Asunto: Re: [RADIATOR] Problem Radiator configuration WIMAX
>>
>> On 03/02/2011 06:08 PM, Augusto Cabrera wrote:
>>>
>>> Hi I am configuring WiMAX radiator for authentication with the CPES are
>>> zyxel, but I have authentication errors please i need help, the setup I
>>> have is the following:
>>
>> Hello,
>>
>> can you tell us a bit more what the problem is? From the log below it
>> looks like there are TTLS authentication Access-Requests and
>> Access-Challenges, but there is no clear error as far as I can tell.
>>
>> If the error is TTLS authentication not finishing, you should check the
>> client configuration. Please check that the clients trust this root
>> certificate:
>>
>> EAPTLS_CAFile /etc/radiator/certificados/cacert.pem
>>
>> It is possible that the client does not recognize or trust the root
>> certificate and for that reasons stops the authentication process. It
>> looks like the TTLS inner authentication does not start so you should
>> concentrate on the certificate setup.
>>
>> Thanks!
>> Heikki
>>
>>
>>> [root@wimax radiator]# vi radius.cfg
>>>
>> Radiator: the most portable, flexible and configurable RADIUS server
>> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
>> Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
>> TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
>> DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS,
>> NetWare etc.
>> _______________________________________________
>> radiator mailing list
>> radiator@open.com.au
>> http://www.open.com.au/mailman/listinfo/radiator
>
>
--
Heikki Vatiainen <h...@open.com.au>
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS,
NetWare etc.
_______________________________________________
radiator mailing list
radiator@open.com.au
http://www.open.com.au/mailman/listinfo/radiator
