Hello Mushtaque -
Thanks for sending the debug output.
I suspect the problem is with the NAS, as the debug shows that you are
returning the following:
Session-Timeout = 2160000
You should have a look at the debug on the NAS to see what is happening.
regards
Hugh
On Wed, 16 Jan 2002 15:04, Muhammad Mushtaque wrote:
> Hi all,
>
> I m using Platypus with Radiator. I ve come across very strange
> problem. There is a field of Blockminleft in Platypus in which we
> insert prepaid time of our users ... when this time exceeds from 36000
> minutes ... the user is not able to connect. Its very strange that the
> user is easily got connected on 35000 mins ... Normally it seems to be
> a radiator issue ... I m attching the detail file part of the users
> which is not geeting connected with 36000 mins ... the user
> authenticates but getting disconnect after authentication ... the
> detail file part is as follows :
>
> *** Received from 202.63.217.245 port 1645 ....
> Code: Access-Request
> Identifier: 253
> Authentic: <184><0>v<229><207><139>e<247><132><227>
> c<146><168><212><16>
> Attributes:
> NAS-IP-Address = 202.63.217.245
> NAS-Port = 109
> Cisco-NAS-Port = "Async109"
> NAS-Port-Type = Async
> User-Name = "test_discount1"
> Called-Station-Id = "7159"
> Calling-Station-Id = "215219321"
> User-Password
> = "<136>$<245>N@<173><170>j<189><130><239>md5C<172>"
> Service-Type = Framed-User
> Framed-Protocol = PPP
>
> Sat Jan 19 08:49:51 2002: DEBUG: Handling request with
> Handler 'Realm=DEFAULT'
> Sat Jan 19 08:49:51 2002: DEBUG: Deleting session for test_discount1,
> 202.63.217.245, 109
> Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> Sat Jan 19 08:49:51 2002: DEBUG: Query is: select DateAdd(Day,
> ma.extension+ma.overdue, maExpireDate),
> DateAdd(Day, sa.extension, saExpireDate), sa.AccountID, sa.AccountType,
> sa.password, sa.login, sa.shell, sa.TimeLeft ,sa.LoginLimit
> from masteraccounts ma, subaccounts sa
> where (sa.login = 'test_discount1' or sa.shell = 'test_discount1')
> and ma.customerid = sa.customerid
> and sa.active <> 0 and ma.active <> 0
>
> Sat Jan 19 08:49:51 2002: DEBUG: Select results: 2003-01-16
> 08:43:40.190, 2003-01-16 08:43:40.190, 6033, PPP, eworld,
> test_discount1, , 36000, 1
> Sat Jan 19 08:49:51 2002: DEBUG: Query is: select ra.RadAttributeID,
> ra.RadVendorID, ra.RadVendorType,
> Data, Value, Type, RadCheck
> from RadConfigs rc, RadAttributes ra
> where ra.RadAttributeID = rc.RadAttributeID
> and ra.RadVendorID = rc.RadVendorID
> and ra.RadVendorType = rc.RadVendorType
> and rc.AccountID=6033
>
> Sat Jan 19 08:49:51 2002: DEBUG: Query is: select ra.RadAttributeID,
> ra.RadVendorID, ra.RadVendorType,
> Data, Value, Type, RadCheck
> from RadATConfigs rc, RadAttributes ra
> where ra.RadAttributeID = rc.RadAttributeID
> and ra.RadVendorID = rc.RadVendorID
> and ra.RadVendorType = rc.RadVendorType
> and rc.AccountType='PPP'
>
> Sat Jan 19 08:49:51 2002: DEBUG: Query is: select
> username,clicheck,cli1,cli2,cli3 from customer where username
> = 'test_discount1'
>
> Sat Jan 19 08:49:51 2002: DEBUG: Radius::AuthEMERALD looks for match
> with test_discount1
> Sat Jan 19 08:49:51 2002: DEBUG: Expiration date converted to:
> 1042657200
> Sat Jan 19 08:49:51 2002: DEBUG: Expiration date converted to:
> 1042657200
> Sat Jan 19 08:49:51 2002: DEBUG: Radius::AuthEMERALD ACCEPT:
> Sat Jan 19 08:49:51 2002: DEBUG: Access accepted for test_discount1
> Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> *** Sending to 202.63.217.245 port 1645 ....
> Code: Access-Accept
> Identifier: 253
> Authentic: <184><0>v<229><207><139>e<247><132><227>
> c<146><168><212><16>
> Attributes:
> Session-Timeout = 2160000
> Service-Type = 2
> Framed-Protocol = 1
> Service-Type = Framed-User
>
> Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> *** Received from 202.63.217.245 port 1646 ....
> Code: Accounting-Request
> Identifier: 254
> Authentic:
> <214>c<190><208><30>n<182><210><214><247><209><15><245><165>\+
> Attributes:
> NAS-IP-Address = 202.63.217.245
> NAS-Port = 109
> Cisco-NAS-Port = "Async109"
> NAS-Port-Type = Async
> User-Name = "test_discount1"
> Called-Station-Id = "7159"
> Calling-Station-Id = "215219321"
> Acct-Status-Type = Start
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> Acct-Session-Id = "0000004C"
> Framed-Protocol = PPP
> Acct-Delay-Time = 0
>
> Sat Jan 19 08:49:51 2002: DEBUG: Handling request with
> Handler 'Realm=DEFAULT'
> Sat Jan 19 08:49:51 2002: DEBUG: Adding session for test_discount1,
> 202.63.217.245, 109
> Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> Sat Jan 19 08:49:51 2002: DEBUG: Handling accounting with
> Radius::AuthEMERALD
> Sat Jan 19 08:49:51 2002: DEBUG: do query is: insert into Calls
> (UserName, CallDate, AcctStatusType, AcctDelayTime,
> AcctSessionId, NASIdentifier, CallerID, NASPort)
> values
> ('test_discount1', 'Jan 19, 2002 08:49', 1,
> 0, '0000004C', '202.63.217.245', '215219321', 109)
>
> Sat Jan 19 08:49:51 2002: DEBUG: Accounting accepted
> Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> *** Sending to 202.63.217.245 port 1646 ....
> Code: Accounting-Response
> Identifier: 254
> Authentic:
> <214>c<190><208><30>n<182><210><214><247><209><15><245><165>\+
> Attributes:
>
> Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> *** Received from 202.63.217.245 port 1646 ....
> Code: Accounting-Request
> Identifier: 255
> Authentic:
> <132>&<178><250><27><198><203><190><5><200><180><207><172>w<231>V
> Attributes:
> NAS-IP-Address = 202.63.217.245
> NAS-Port = 109
> Cisco-NAS-Port = "Async109"
> NAS-Port-Type = Async
> User-Name = "test_discount1"
> Called-Station-Id = "7159"
> Calling-Station-Id = "215219321"
> Acct-Status-Type = Stop
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> Acct-Session-Id = "0000004C"
> Framed-Protocol = PPP
> Acct-Terminate-Cause = Host-Request
> Acct-Input-Octets = 62
> Acct-Output-Octets = 8
> Acct-Input-Packets = 3
> Acct-Output-Packets = 1
> Acct-Session-Time = 0
> Acct-Delay-Time = 0
>
> Sat Jan 19 08:49:51 2002: DEBUG: Handling request with
> Handler 'Realm=DEFAULT'
> Sat Jan 19 08:49:51 2002: DEBUG: Deleting session for test_discount1,
> 202.63.217.245, 109
> Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> Sat Jan 19 08:49:51 2002: DEBUG: Handling accounting with
> Radius::AuthEMERALD
> Sat Jan 19 08:49:51 2002: DEBUG: do query is: insert into Calls
> (UserName, CallDate, AcctStatusType, AcctDelayTime,
> AcctInputOctets, AcctOutputOctets, AcctSessionId, AcctSessionTime,
> AcctTerminateCause, NASIdentifier, CallerID, NASPort)
> values
> ('test_discount1', 'Jan 19, 2002 08:49', 2, 0, 62,
> 8, '0000004C', 0, 18, '202.63.217.245', '215219321', 109)
>
> Sat Jan 19 08:49:51 2002: DEBUG: Accounting accepted
> Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> *** Sending to 202.63.217.245 port 1646 ....
> Code: Accounting-Response
> Identifier: 255
> Authentic:
> <132>&<178><250><27><198><203><190><5><200><180><207><172>w<231>V
> Attributes:
>
> Any one can help me out here ??
>
> thanks in Advance ...
>
> Best regards,
>
> Muhammad Mushtaque
> Network Operations
> eWorld(Pvt)Ltd.
> 506, Progressive Plaza,
> Beaumont Road Civil Lines,
> Karachi.
> UAN:92-21-111246246
>
> ________
> This email and any files transmitted with it are confidential and are
> intended solely for the use of the individual or entity to which they
> are addressed. This communication represents the originator's personal
> views and opinions, which do not necessarily reflect those of eWorld
> (Pvt) Ltd. If you are not the original / intended recipient or the
> person responsible for delivering the email to the intended recipient,
> be advised that you have received this email in error, and that any
> use, dissemination, forwarding, printing, or copying of this email is
> strictly prohibited. If you have received this email in error, we
> regret the inconvenience and request you to please immediately notify
> at [EMAIL PROTECTED]
>
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on [EMAIL PROTECTED]
> To unsubscribe, email '[EMAIL PROTECTED]' with
> 'unsubscribe radiator' in the body of the message.
--
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X.
-
Nets: internetwork inventory and management - graphical, extensible,
flexible with hardware, software, platform and database independence.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
