I just tried changing the realm and I am still getting the same error. Only now instead of 127.0.0.1 it shows the realm as default
At 03:42 PM 1/2/02 -0500, Dave Kitabjian wrote: >The problem is that "127.0.0.1" is not a realm, it's a Client. > >Try changing > > <Realm 127.0.0.1> > >to > > <Realm DEFAULT> > >and let us know if it works. > >Dave > > > -----Original Message----- > > From: Eric Johnson [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, January 02, 2002 11:21 AM > > To: [EMAIL PROTECTED] > > Subject: (RADIATOR) Authenticaton Problems > > > > > > When I run radpwtst I get three no reply errors in a row. > > The default user is in the test database. In the log file > > the error is a bad authenticator. Here is the log file and > > the config file that I am using. Could someone tell me what > > I am doing wrong and possibly how to fix it? > > > > Wed Jan 2 10:05:56 2002: DEBUG: Packet dump: > > *** Received from 127.0.0.1 port 1528 .... > > Code: Access-Request > > Identifier: 131 > > Authentic: 1234567890123456 > > Attributes: > > User-Name = "mikem" > > Service-Type = Framed-User > > NAS-IP-Address = 203.63.154.1 > > NAS-Port = 1234 > > Called-Station-Id = "123456789" > > Calling-Station-Id = "987654321" > > NAS-Port-Type = Async > > User-Password = > > "<159><249>:<201><175>\<4><246><188>8<9><160><216>}x<153>" > > > > Wed Jan 2 10:05:56 2002: DEBUG: Check if Handler > > Realm=127.0.0.1 should be used to handle this request Wed Jan > > 2 10:05:56 2002: WARNING: Could not find a handler for > > mikem: request is ignored Wed Jan 2 10:06:01 2002: DEBUG: > > Packet dump: > > *** Received from 127.0.0.1 port 1528 .... > > Code: Accounting-Request > > Identifier: 132 > > Authentic: <156>,{*<190><151><218><249><183><15>Y<127><146><128><6> > > Attributes: > > User-Name = "mikem" > > Service-Type = Framed-User > > NAS-IP-Address = 203.63.154.1 > > NAS-Port = 1234 > > NAS-Port-Type = Async > > Acct-Session-Id = "00001234" > > Acct-Status-Type = Start > > Called-Station-Id = "123456789" > > Calling-Station-Id = "987654321" > > > > Wed Jan 2 10:06:01 2002: WARNING: Bad authenticator in > > request from 127.0.0.1 (203.63.154.1) Wed Jan 2 10:06:06 > > 2002: DEBUG: Packet dump: > > *** Received from 127.0.0.1 port 1528 .... > > Code: Accounting-Request > > Identifier: 133 > > Authentic: <193><187><186><190><186><181><21><228><23>V<253>a+2I<133> > > Attributes: > > User-Name = "mikem" > > Service-Type = Framed-User > > NAS-IP-Address = 203.63.154.1 > > NAS-Port = 1234 > > NAS-Port-Type = Async > > Acct-Session-Id = "00001234" > > Acct-Status-Type = Stop > > Called-Station-Id = "123456789" > > Calling-Station-Id = "987654321" > > Acct-Delay-Time = 0 > > Acct-Session-Time = 1000 > > Acct-Input-Octets = 20000 > > Acct-Output-Octets = 30000 > > > > Wed Jan 2 10:06:06 2002: WARNING: Bad authenticator in > > request from 127.0.0.1 (203.63.154.1) > > > > Foreground > > LogStdout > > LogDir /Radiator/log > > #Dictionary File is in current dir > > DictionaryFile ./dictionary > > Trace 4 > > > > <Client 127.0.0.1> > > Secret dogcat > > DupInterval 0 > > </Client> > > <AuthBy SQL> > > > > Identifier CheckSQL > > > > DBSource dbi:mysql:ISP > > DBUsername admin > > DBAuth lifter > > AccountingTable ACCOUNTING > > AcctColumnDef USERNAME,User-Name > > AcctColumnDef TIME_STAMP,Timestamp,integer > > AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type > > AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer > > AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer > > AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer > > AcctColumnDef ACCTSESSIONID,Acct-Session-Id > > AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer > > AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause > > AcctColumnDef NASIDENTIFIER,NAS-Identifier > > AcctColumnDef NASPORT,NAS-Port,integer > > </AuthBy> > > > > > > > > <AuthBy NT> > > > > Identifier CheckNT > > > > # You must set the domain name here to suit > > your site > > Domain ETHERNET1 > > > > # ON NT, optionally specify the name of the > > # Primary Domain Controller, including the leading > > # \\ slashes, to override the default domain > > controller > > # for the domain you specified above > > DomainController \\FEZZIK > > > > # On Unix, you MUST specify the Domain Controller > > # name as the NT host name of the domain controller > > # its not optional. This needs to be set to the NT > > # name of the Primary Domain Controller, and further > > # the NT name must be in the Unix hosts or DNS > > DomainController FEZZIK > > > > # On NT, you can optionally check the > > # "Grant dialin permission to user" flag in the > > # user manager. Requires the > > # Win32-RasAdmin Perl package to be installed first > > # HonourDialinPermission > > > > # This will set up some standard reply items for > > # your NAS, you may need others for your NAS > > DefaultReply > > Service-Type=Framed-User,Framed-Protocol=PPP > > </AuthBy> > > > > <Realm 127.0.0.1> > > AuthByPolicy ContinueUntilAccept > > AuthBy CheckNT > > AuthBy CheckSQL > > # Log accounting to the detail file in LogDir > > AcctLogFileName ./detail > > </Realm> > > > > > > -- > > Eric Johnson > > > > Teamworks Media > > www.teamworksmedia.com > > -- > > === > > Archive at http://www.open.com.au/archives/radiator/ > > Announcements on [EMAIL PROTECTED] > > To unsubscribe, email '[EMAIL PROTECTED]' with > > 'unsubscribe radiator' in the body of the message. > > === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
