>Hello Chris -
>
>The first problem is due to your SNMP program - try running the
>query by hand to verify its operation and make sure you have set
>SnmpgetProg to the correct location.
It works fine for PM3's though, those errors appear to be coming from
the Cisco boxen queries, and I think the source of trouble is that
20019 which seems to be a Port number (at least that is what radwho
thinks):
username <some IP address> 20019 00000754 Tue
Aug 15 08:14:33 2000 0 00:04:30 ISDN Framed-User
5248's don't have 20000 ports in them, just 48 :) So something weird is afoot.
I'll look at this second issue later today.
Chris
>
>The second problem is likely a Cisco configuration issue. Run
>Radiator with a trace 4 debug to see what attributes are actually
>present in the radius packets. You may need to add something to the
>Cisco configuration to get this additional information reported in
>the Radius accounting packets.
>
>hth
>
>Hugh
>
>
>At 7:49 PM -0600 14/8/00, Chris M wrote:
>>I'm having trouble with AS5248's that have the NasType set to Cisco.
>>
>>I get errors on the console, not in the log:
>>
>>Error in packet
>>Reason: (noSuchName) There is no such variable name in this MIB.
>>This name doesn't exist: enterprises.9.2.9.2.1.18.20019
>>
>>I also don't get a Framed-IP-Address and Connect-Info showing up in the
>>SessionDatabase for the Cisco boxen, but PM3 boxen seem to work OK as viewed
>>with Radwho.
>>
>>Any ideas where to start looking for these issues?
>>
>>Thanks,
Chris
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
