At 10:53 AM 31/01/00 +0530, you wrote:
>Hi
>
>I have included the trace below with the cisco conf, it seems in the
>trace that all is sent correctly ...Oh is the correct syntax ip-addr OR
>ip_addr since I have seen both, and have tried both and none have
>worked.
>
>Iqbal
Hello Iqbal,
You will have to debug ppp negotiation, aaa authentication and aaa
authorization to find out exactly what is going on. Hopefully this will
tell you what went wrong.
One thing I would try is to change the peer default ip statement on the
group-async to:
peer default ip address pool net4
without the emailo group at the end of it. This may be causing the problem
as the NAS knows that both ip pools are configured by default and just
selects the first one listed, even though you are explicitly defining one
via RADIUS. We pass the ip:addr-pool attribute out on every access-accept
for the NAS to process and to date have not had a failure. We have been
doing this on 11.3T as well as 12.0 and 12.0T
Hope this helps
Matt
---
Matthew Nichols - CCNA
Network / Systems Engineer
HunterLink Pty Ltd
Newcastle NSW Australia
Phone: +61 2 4969 0122 Fax: +61 2 4969 0133
Reply To: [EMAIL PROTECTED]
PGP Public Key: http://moonah.hunterlink.net.au/~matt/pgp/pgpkey.html
HunterLink Web Site: http://www.hunterlink.net.au
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
