On Wed, Mar 03, 1999 at 03:20:02PM +1000, Leigh Spiegel wrote:
> Hi Justin,
>
> > I am wanting to record the connect speed of our dialin customers - however
> > I have had little success so far.
> >
> > We are running radiator 2.13 and using a mix of Cisco 2511/5300/5200
> > routers. (I'm not expecting to get connect speeds from the 2511s though)
> >
> > I have got it logging things like called-station-id, but it isnt putting
> > anything into the Connect-Info attribute.
> >
> > I've tried radius-server host 1.2.3.4 non-standard and radius-server vsa
> > send accounting/authentication with no success.
>
> I have a 5200 also and it doesn't report the connect speeds, in fact running
> older
> versions of the IOS it didn't report much of anything at all. I also have a
> Bay 5399 and a Lucent PM3. They both report connect speeds, so as far as I
> can tell, it's just Cisco's
Our cisco's give us gallons of stuff with the non-standard setting and
c5200-i-l.113-8.T1 loaded. All the connect rate stuff is from their Ascend
compatibility code.
Wed Mar 3 20:05:03 1999
NAS-IP-Address = 203.x.x.x
NAS-Port = 19
NAS-Port-Type = Async
User-Name = "dialup"
Called-Station-Id = "1234"
Calling-Station-Id = "4321"
Acct-Status-Type = Stop
Acct-Authentic = RADIUS
Service-Type = Framed-User
Acct-Session-Id = "00000710"
Framed-Protocol = PPP
Framed-IP-Address = 203.x.x.x
Ascend-Disconnect-Cause = 11
Ascend-Pre-Input-Octets = 127
Ascend-Pre-Output-Octets = 100
Ascend-Pre-Input-Packets = 5
Ascend-Pre-Output-Packets = 5
Acct-Input-Octets = 102769
Acct-Output-Octets = 180356
Acct-Input-Packets = 383
Acct-Output-Packets = 368
Ascend-PreSession-Time = 3
Acct-Session-Time = 2472
Ascend-Data-Rate = 28800
Ascend-Xmit-Rate = 26400
Acct-Delay-Time = 0
Timestamp = 920451903
[EMAIL PROTECTED]
===
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
