Hi Steve,
Ciscos invariably require some extra reply attributes that most other NASs have
enough sense to figure out for them selves. If you add this to your AuthBy SQL:
AddToReply Service-Type = Framed-User,\
Framed-Protocol = PPP,\
Framed-IP-Netmask = 255.255.255.255,\
Framed-Routing = None,\
Framed-MTU = 1500,\
Framed-Compression = Van-Jacobson-TCP-IP\
You will have much more luck I think.
Cheers.
On Feb 25, 12:16pm, Steve Lalonde wrote:
> Subject: (RADIATOR) radiator not sending reply items to cisco 2511
>
> [ Attachment (text/plain): 2652 bytes
> Character set: Windows-1252
> plain text ]
>-- End of excerpt from Steve Lalonde
Hi Guru's
I have radiator working great or my 3-com total control hubs
But i have 2 cisco 2511 boxes that authenticate fine then drop the
connections
with no accounting data at all.
I'm using the USR dictionary do i need to change somthing to get the ciscos
to work?
all the nas's used to auth from the same merit radius box just fine.
here is the config
cheers
Steve Lalonde
Systems Manager
ENTANET International Ltd
##############################################################
#sql radius config
Foreground
LogDir /var/log/radius
DbDir /usr/local/etc/raddb
Trace 3
<Client DEFAULT>
Secret xxxxxxxxx
IgnoreAcctSignature
</Client>
<Realm DEFAULT>
<AuthBy SQL>
DBSource dbi:mysql:radius
DBUsername xxxxxx
DBAuth xxxxxx
AuthSelect select PASSWORD, CHECKATTR, REPLYATTR \
from SUBSCRIBERS \
where USERNAME='%n'
AuthColumnDef 0, User-Password, check
AuthColumnDef 1, GENERIC, check
AuthColumnDef 2, GENERIC, reply
AccountingStopsOnly
AcctColumnDef USERNAME,User-Name
AcctColumnDef TIME_STAMP,Timestamp,integer
AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type
AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer
AcctColumnDef ACCTINPUTOCTETS,Acct-Input-Octets,integer
AcctColumnDef ACCTOUTPUTOCTETS,Acct-Output-Octets,integer
AcctColumnDef ACCTSESSIONID,Acct-Session-Id
AcctColumnDef ACCTSESSIONTIME,Acct-Session-Time,integer
AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause
AcctColumnDef NASIDENTIFIER,Client-Id
AcctColumnDef NASPORT,NAS-Port,integer
AcctColumnDef PHONE,Calling-Station-Id
AcctColumnDef SPEED,Connect-Speed
AcctColumnDef IPADDRESS,Framed-IP-Address
AcctColumnDef PORTTYPE,NAS-Port-Type
AcctColumnDef MODULATION,Modulation-Type
</AuthBy>
</Realm>
<SessionDatabase SQL>
DBSource dbi:mysql:radius
DBUsername xxxxxxx
DBAuth xxxxxxx
AddQuery insert into RADONLINE (USERNAME, NASIDENTIFIER,
NASPORT, \
ACCTSESSIONID, TIME_STAMP, FRAMEDIPADDRESS, NASPORTTYPE, \
SERVICETYPE, CONNECTSPEED, PHONENUMBER) values ('%n', '%N',\
%{NAS-Port}, '%{Acct-Session-Id}', \
%{Timestamp}, '%{Framed-IP-Address}', '%{NAS-Port-Type}',\
'%{Service-Type}', '%{Connect-Speed}', '%{Calling-Station-Id}')
</SessionDatabase>
--
I will be travelling Feb 27 to Mar 15. Email contact may be intermittent
Mike McCauley [EMAIL PROTECTED]
Open System Consultants Pty. Ltd Unix, Perl, Motif, C++, WWW
24 Bateman St Hampton, VIC 3188 Australia Consulting and development
Phone, Fax: +61 3 9598-0985 http://www.open.com.au
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, external, etc etc on Unix, Win95/8, NT, Rhapsody
===
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
