Thanks for the example! I did not guess correctly about your mixture of
embedded modules and `dynamic-require`.
The short answer is that you should either embed modules or reference
them through an external paths like "/Applications/Racket
v7.7/collects", but not both. Otherwise, the two worlds collide in
confusing ways, in this case along the lines Sam suggested.
Longer answer: When you embed a module, it pulls along a copy of
anything that module depends on. Your "test.rkt" pulls along
`racket/base`, which pulls along `racket/private/promise`, which
defines `force` and the promise datatype. But it doesn't
`racket/promise`, which defines `delay/sync`, and that leads to a
mismatch.
Very long answer: When `server` starts, there are two possible
`racket/private/promise`s available: the emebded copy and the one in
"/Applications/Racket v7.7/collects". As an artifact of the way that
`racket/promise` references `racket/private/promise`, the
`racket/promise` in "/Applications/Racket v7.7/collects" will always
refer to the `racket/private/promise` there. And so `delay/sync` as
used in `setup/private/dirs` will refer to the promise datatype there.
But the `force` used in `setup/private/dirs` goes through `racket/base`
and ends up referring the the embedded `racket/private/promise`, which
has its own promise datatype; since `force` doesn't recognize the
result of `delay/sync` as a promise, it doesn't force the (othe rkind
of) promise, and it instead just returns it. Finally, `planet/config`
is unhappy to get back a promise, because it expects a path.
If you expect a full "collects" directory and more to be around at run
time, then there's no reason to embed code, and just use
racket_dynamic_require(Sstring("test.rkt"), Sfalse);
to load the module. But if you want to embed everything, then avoid
`dynamic-require` or use `++lib` or `define-module-path-index` to carry
along the dynamically required modules.
Matthew
At Mon, 13 Jul 2020 15:20:18 -0500, Nate Griswold wrote:
> I put up a repo with the bug at https://github.com/nwg/racket-expo
>
> The stack trace is this:
>
> build-path: contract violation
> expected: (or/c path-string? path-for-some-system? 'up 'same)
> given: #<promise:config:installation-name>
> context...:
> do-raise-argument-error
> loop
> build
> proc
> call-in-empty-metacontinuation-frame
> call-with-module-prompt
> body of "/Applications/Racket v7.7/collects/planet/config.rkt"
> temp35_0
> for-loop
> run-module-instance!
> for-loop
> [repeats 1 more time]
> run-module-instance!
> for-loop
> [repeats 1 more time]
> run-module-instance!
>
> Nate
>
>
> On Mon, Jul 13, 2020 at 1:03 PM Ryan Culpepper <rmculpepp...@gmail.com>
> wrote:
>
> > I don't know if it helps, but config:installation-name is a promise
> > defined by setup/private/dirs.
> >
> > Ryan
> >
> >
> > On Mon, Jul 13, 2020 at 7:23 PM Matthew Flatt <mfl...@cs.utah.edu> wrote:
> >
> >> I'm not sure how it could be in `dynamic-require` itself, as opposed to
> >> a library that is loaded by `dynamic-require`, but it sounds like a bug
> >> at some level. Can you provide a small example?
> >>
> >> At Mon, 13 Jul 2020 11:03:41 -0500, Nate Griswold wrote:
> >> > Sam, thanks
> >> >
> >> > To be clear, this crash happened DURING a dynamic-require and judging by
> >> > the stack trace looked to be part of the dynamic-require machinery (and
> >> > this seems to depend on the installation name).
> >> >
> >> > I actually wasn't depending on anything but racket/base, so i don't
> >> believe
> >> > anything i was using was causing a separate dependency on promise.
> >> >
> >> > Nate
> >> >
> >> >
> >> > On Mon, Jul 13, 2020 at 9:32 AM Sam Tobin-Hochstadt <
> >> sa...@cs.indiana.edu>
> >> > wrote:
> >> >
> >> > > My guess, not having looked further than your email, is that when you
> >> > > don't include racket/promise, something is supplying a promise to
> >> something
> >> > > else but there are two different instantiations of the promise
> >> library,
> >> > > causing the force call from one not to recognize the promise from the
> >> > > other. Then force just becomes the identity function, and passes
> >> through a
> >> > > promise to somewhere that isn't expecting one.
> >> > >
> >> > > Is it possible that some library you're using features promises?
> >> > > Alternatively, it might be that the embedding code needs an explicit
> >> > > dependency on promises.
> >> > >
> >> > > Sam
> >> > >
> >> > > On Mon, Jul 13, 2020, 10:18 AM Nate Griswold <nategrisw...@gmail.com>
> >> > > wrote:
> >> > >
> >> > >> Hello.
> >> > >>
> >> > >> I noticed something and was wondering what the list thinks:
> >> > >>
> >> > >> I am using an embedded racket Ics) and i noticed that if i embed a
> >> file
> >> > >> and don't include any libraries (for a very bare bones c file) i have
> >> > >> problems with a crash on a promise on any dynamic-require:
> >> > >>
> >> > >> build-path: contract violation
> >> > >> expected: (or/c path-string? path-for-some-system? 'up 'same)
> >> > >> given: #<promise:config:installation-name>
> >> > >>
> >> > >> but if i do a (require racket/promise) in my rkt argument to
> >> --c-mods OR
> >> > >> if i do a ++lib racket/promise i get no crash.
> >> > >>
> >> > >> So is this expected behavior? Should racket/promise always be
> >> included or
> >> > >> no? And what exactly is going on under the hood here?
> >> > >>
> >> > >> Nate
> >> > >>
> >> > >> --
> >> > >> You received this message because you are subscribed to the Google
> >> Groups
> >> > >> "Racket Users" group.
> >> > >> To unsubscribe from this group and stop receiving emails from it,
> >> send an
> >> > >> email to racket-users+unsubscr...@googlegroups.com.
> >> > >> To view this discussion on the web visit
> >> > >>
> >> >
> >>
> https://groups.google.com/d/msgid/racket-users/CAM-xLPpg_0Ef8ByjS01Y1pKEeeFMVkF
> >> > k3dvGcdpRaYo3ZqDb9A%40mail.gmail.com
> >> > >>
> >> > <
> >>
> https://groups.google.com/d/msgid/racket-users/CAM-xLPpg_0Ef8ByjS01Y1pKEeeFMVk
> >> > Fk3dvGcdpRaYo3ZqDb9A%
> >> 40mail.gmail.com?utm_medium=email&utm_source=footer>
> >> > >> .
> >> > >>
> >> > >
> >> >
> >> > --
> >> > You received this message because you are subscribed to the Google
> >> Groups
> >> > "Racket Users" group.
> >> > To unsubscribe from this group and stop receiving emails from it, send
> >> an
> >> > email to racket-users+unsubscr...@googlegroups.com.
> >> > To view this discussion on the web visit
> >> >
> >>
> https://groups.google.com/d/msgid/racket-users/CAM-xLPpaOSxvPEDYzmkAXdFg%2BLTMA
> >> > H1mw57kJt7%3DCe6ipXmXDw%40mail.gmail.com.
> >>
> >> --
> >> You received this message because you are subscribed to the Google Groups
> >> "Racket Users" group.
> >> To unsubscribe from this group and stop receiving emails from it, send an
> >> email to racket-users+unsubscr...@googlegroups.com.
> >> To view this discussion on the web visit
> >>
> https://groups.google.com/d/msgid/racket-users/20200713112340.24e%40sirmail.smt
> p.cs.utah.edu
> >> .
> >>
> >
>
> --
> You received this message because you are subscribed to the Google Groups
> "Racket Users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to racket-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/racket-users/CAM-xLPoKbgtUGTFoRSvK0D2M%2BX_EE
> 38z0bwuW-p3MptyWHkCnw%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Racket Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to racket-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/racket-users/20200713193245.24%40sirmail.smtp.cs.utah.edu.
