I think the Bioconductor error on R-hub is a red herring. The error message is printed, but the actual error is ignored. So this is really only an issue if you do need a Bioconductor package for the check.
I think the issue might be that for R-devel CRAN binaries are x64 only, but R CMD INSTALL and R CMD check still try to install the package for i386 as well. Dependencies (e.g. chron in this case) will not be available on i386. At least this is the issue for R-hub, because it uses CRAN binaries by default: https://artifacts.r-hub.io/movecost_1.2.tar.gz-cbda0dbe4d7a414498921e9ab2a54aaf/movecost.Rcheck/00install.out AFAICT Win-builder has its own package library, which might have i386 support, I don't know. So maybe the issue is different there. Gabor On Mon, Jul 5, 2021 at 11:27 AM Gianmarco Alberti <gianmarcoalbe...@gmail.com> wrote: > > Hello, > Thanks for your reply. > > I got mixed results using: > devtools::check_win_oldrelease() - STATUS OK (R version 4.0.5) - > https://win-builder.r-project.org/7qy6PL8C7ye7 > > devtools::check_win_release() - 1 ERROR (R version 4.1.0) - > https://win-builder.r-project.org/hlA15dFq5BdR > > devtools::check_win_devel() - 1 ERROR (R Under development (unstable) - > https://win-builder.r-project.org/uQ0LGZ7v0E5h > > The reported error is to be: > ERROR: lazy loading failed for package ‘movecost’ > > Since I couldn’t understand the actual underlying issue, I ran > devtools::check_rhub() (as described in my earlier email) which brought to > the fore the Bioconductor issue. > > I have tested the package on Win (R version 4.1) and everything was fine. > > I hope I have addressed your question. > Please let me know if you need any other relevant info from my end. > > Best > Gm > > ************************************************ > Dr Gianmarco Alberti (PhD Udine) > Lecturer in Spatial Forensics > Coordinator of the BA dissertations > Department of Criminology > Faculty for Social Wellbeing > Room 332, Humanities B (FEMA) > University of Malta, Msida, Malta (Europe) - MSD 2080 > tel +356 2340 3718 > > Academic profiles > https://www.researchgate.net/profile/Gianmarco_Alberti4 > https://malta.academia.edu/GianmarcoAlberti > > Google Scholar profile > https://scholar.google.com/citations?user=tFrJKQ0AAAAJ&hl=en > > Correspondence Analysis website > http://cainarchaeology.weebly.com/ > > R packages on CRAN: > CAinterprTools > https://cran.r-project.org/web/packages/CAinterprTools/index.html > > GmAMisc > https://cran.r-project.org/package=GmAMisc > > movecost > https://cran.r-project.org/web/packages/movecost/index.html > ************************************************ > On 5 Jul 2021, 11:20 +0200, Uwe Ligges <lig...@statistik.tu-dortmund.de>, > wrote: > > What happens when you test it on winbuilder? > > It is configured like the CRAN incoming checks and there should be all > > relevant packages available. > > > > Best, > > Uwe Ligges > > > > > > On 05.07.2021 11:16, Gianmarco Alberti wrote: > > > Hello, > > > Further to my earlier email, I think I have located a likely issue, and I > > > would appreciate feedback. > > > > > > I ran devtools::check_rhub(), and somewhere in the flood of the output I > > > got there is the following message: > > > > > > Bioconductor does not yet build and check packages for R version 4.2 > > > > > > The complete report that I got from devtools::check_rhub() is here: > > > https://builder.r-hub.io/status/movecost_1.2.tar.gz-cbda0dbe4d7a414498921e9ab2a54aaf > > > > > > > > > Any idea about how to proceed in order for me to get my package on CRAN? > > > I am noticing that I am not the only one experiencing that isse > > > (https://github.com/r-hub/rhub/issues/471). > > > > > > Best > > > GmA > > > > > > ************************************************ > > > Dr Gianmarco Alberti (PhD Udine) > > > Lecturer in Spatial Forensics > > > Coordinator of the BA dissertations > > > Department of Criminology > > > Faculty for Social Wellbeing > > > Room 332, Humanities B (FEMA) > > > University of Malta, Msida, Malta (Europe) - MSD 2080 > > > tel +356 2340 3718 > > > > > > Academic profiles > > > https://www.researchgate.net/profile/Gianmarco_Alberti4 > > > https://malta.academia.edu/GianmarcoAlberti > > > > > > Google Scholar profile > > > https://scholar.google.com/citations?user=tFrJKQ0AAAAJ&hl=en > > > > > > Correspondence Analysis website > > > http://cainarchaeology.weebly.com/ > > > > > > R packages on CRAN: > > > CAinterprTools > > > https://cran.r-project.org/web/packages/CAinterprTools/index.html > > > > > > GmAMisc > > > https://cran.r-project.org/package=GmAMisc > > > > > > movecost > > > https://cran.r-project.org/web/packages/movecost/index.html > > > ************************************************ > > > On 5 Jul 2021, 09:49 +0200, Gianmarco Alberti > > > <gianmarcoalbe...@gmail.com>, wrote: > > > > Good morning, > > > > > > > > I got stuck on what follows. > > > > I have tested a new version of my package locally (on a MAC), and > > > > everything is fine. > > > > > > > > I got mixed results using: > > > > devtools::check_win_oldrelease() - STATUS OK (R version 4.0.5) - > > > > https://win-builder.r-project.org/7qy6PL8C7ye7 > > > > > > > > devtools::check_win_release() - 1 ERROR (R version 4.1.0) - > > > > https://win-builder.r-project.org/hlA15dFq5BdR > > > > > > > > devtools::check_win_devel() - 1 ERROR (R Under development (unstable) > > > > - https://win-builder.r-project.org/uQ0LGZ7v0E5h > > > > > > > > The reported error seems to be: > > > > ERROR: lazy loading failed for package ‘movecost' > > > > > > > > > > > > I have asked a friend to run devtools::check() on his Win-based machine > > > > (running R version 4.1.0), and the test returned no problems (0 error, > > > > 0 warning, 0 notes). > > > > > > > > Since I cannot reproduce the error neither on my computer nor on a > > > > win-based machine, I am at loss of understanding where the issue > > > > actually lies. > > > > > > > > I would really appreciate any help and/or suggestion. > > > > > > > > Best > > > > Gianmarco > > > > > > > > > > > > > > > > > > > > ************************************************ > > > > Dr Gianmarco Alberti (PhD Udine) > > > > Lecturer in Spatial Forensics > > > > Coordinator of the BA dissertations > > > > Department of Criminology > > > > Faculty for Social Wellbeing > > > > Room 332, Humanities B (FEMA) > > > > University of Malta, Msida, Malta (Europe) - MSD 2080 > > > > tel +356 2340 3718 > > > > > > > > Academic profiles > > > > https://www.researchgate.net/profile/Gianmarco_Alberti4 > > > > https://malta.academia.edu/GianmarcoAlberti > > > > > > > > Google Scholar profile > > > > https://scholar.google.com/citations?user=tFrJKQ0AAAAJ&hl=en > > > > > > > > Correspondence Analysis website > > > > http://cainarchaeology.weebly.com/ > > > > > > > > R packages on CRAN: > > > > CAinterprTools > > > > https://cran.r-project.org/web/packages/CAinterprTools/index.html > > > > > > > > GmAMisc > > > > https://cran.r-project.org/package=GmAMisc > > > > > > > > movecost > > > > https://cran.r-project.org/web/packages/movecost/index.html > > > > ************************************************ > > > > > > [[alternative HTML version deleted]] > > > > > > ______________________________________________ > > > R-package-devel@r-project.org mailing list > > > https://stat.ethz.ch/mailman/listinfo/r-package-devel > > > > > [[alternative HTML version deleted]] > > ______________________________________________ > R-package-devel@r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-package-devel ______________________________________________ R-package-devel@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-package-devel
