Thanks. There is one more idea from Jim Lemon which can also help.
In my case I am dealing with a sys. admin who thinks the JVM is using all
the memory in the linux machine. I think it is
http://www.linuxatemyram.com/ syndrome.
So if the junior sys. admin loses perspective I will never be released
from this assignment :-)
So I am gathering 'pmap' output and plotting Total size(Kbytes) and
Resident Size(RSS) of the JVM.
Mohan
From: John Kane <jrkrid...@inbox.com>
To: mohan.radhakrish...@polarisft.com
Cc: r-help@r-project.org
Date: 08/27/2013 06:11 PM
Subject: RE: [R] Scale of axis for two data sets
Well I have not spent a lot of time looking at the data , especially with
what appeared to be a constant :) . It was not clear to me that they were
the same units for one thing.
>From my point of view (essentially total ignorance) if you have a
situation where you have data plotted with the same set of units it's even
dicier to use a two scale plot. You are just demanding too much of the
reader to figure out which line is which and remember that the line
attached to the right axis is 10^3 of the values of the left access.
My solution would probably be to just stack the two graphs one on top of
the other , with the top graph having the 'higher' values. However it is
a judgement call and also dependent on the discipline.
Anyway see the quick and dirty attempt attached to see what I am
suggesting.
John Kane
Kingston ON Canada
-----Original Message-----
From: mohan.radhakrish...@polarisft.com
Sent: Tue, 27 Aug 2013 17:31:18 +0530
To: jrkrid...@inbox.com
Subject: RE: [R] Scale of axis for two data sets
Hi,
Can't one y-axis be used ? Both 'Kbytes' and 'RSS' use the
same unit.
Thanks,
Mohan
From: John Kane <jrkrid...@inbox.com>
To: mohan.radhakrish...@polarisft.com
Cc: r-help@r-project.org
Date: 08/27/2013 05:13 PM
Subject: RE: [R] Scale of axis for two data sets
Still looks like a constant to me :) I think I see what you mean though.
It's just that representation of the numbers in the email don't show any
difference.
Personally I think I'd go with a two panel graph using par() rather than
a double-axis graph if you can. Everything I have read about double-axis
graphs is rather negative. However, I know they are standard in some
disciplines.
John Kane
Kingston ON Canada
-----Original Message-----
From: mohan.radhakrish...@polarisft.com
Sent: Tue, 27 Aug 2013 17:08:51 +0530
To: jrkrid...@inbox.com
Subject: RE: [R] Scale of axis for two data sets
It is not a constant but changes very slowly. Actually it should be like
this.
Kbytes RSS rNo
2687188 1287532 1
2687188 1287532 2
2687188 1287536 3
2687188 1287540 4
2687188 1287640 5
2687188 1287640 6
Thanks,
Mohan
From: John Kane <jrkrid...@inbox.com>
To: mohan.radhakrish...@polarisft.com, r-help@r-project.org
Date: 08/27/2013 04:57 PM
Subject: RE: [R] Scale of axis for two data sets
I am misreading something here I think. Why are you graphing against a
constant?
John Kane
Kingston ON Canada
> -----Original Message-----
> From: mohan.radhakrish...@polarisft.com
> Sent: Tue, 27 Aug 2013 13:28:48 +0530
> To: r-help@r-project.org
> Subject: [R] Scale of axis for two data sets
>
> Hi,
>
> Kbytes RSS rNo
>
> 2689632 1450876 1433788
> 2689632 1450876 1433788
> 2689632 1450876 1433788
> 2689632 1450876 1433788
> 2689632 1450876 1433788
> 2689632 1450876 1433788
> 2689632 1450876 1433788
> 2689632 1460168 1443084
>
>
>
> plot(data$rNo,data$RSS,pch=0,type="b",col=36,axes=FALSE, ylab="",
> xlab="",las=2,lwd=2.5)
> title(" PID - 23512 / pmap Data Analysis for 1
> hour",cex.main=3,xlab="Seconds", ylab="Kbytes ", cex.lab=3,1)
>
> axis(side=1, at=seq(0, max(data$rNo), by=5), cex.axis=1.7)
> axis(side=2, at=seq(0, max(data$Kbytes ), by=1000), cex.axis=1.7)
>
> This code plots Kbytes against rNo.
>
> I tried to combine this with the plot of RSS against rNo. It looks like
> with the same scale in the y-axis(Kbytes) the second graph(RSS/rNo)
> doesn't show plots properly. It seems like the second plot draws
properly
> but doesn't match the y-axis scale.
>
> IfI separate the plots into two 'R' files I get it correctly.
>
> How do I used the same y-axis scale(Kbytes) but also plot RSS against
> rNo.
> Hope I am not confusing this.
>
> Thanks,
> Mohan
>
>
>
> This e-Mail may contain proprietary and confidential information and is
> sent for the intended recipient(s) only. If by an addressing or
> transmission error this mail has been misdirected to you, you are
> requested to delete this mail immediately. You are also hereby notified
> that any use, any form of reproduction, dissemination, copying,
> disclosure, modification, distribution and/or publication of this
e-mail
> message, contents or its attachment other than by its intended
> recipient/s is strictly prohibited.
>
> Visit us at http://www.polarisFT.com [http://www.polarisft.com/] [
http://www.polarisft.com/ [http://www.polarisft.com/]]
>
> [[alternative HTML version deleted]]
>
> ______________________________________________
> R-help@r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help [
https://stat.ethz.ch/mailman/listinfo/r-help] [
https://stat.ethz.ch/mailman/listinfo/r-help [
https://stat.ethz.ch/mailman/listinfo/r-help]]
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html [
http://www.r-project.org/posting-guide.html] [
http://www.r-project.org/posting-guide.html [
http://www.r-project.org/posting-guide.html]]
> and provide commented, minimal, self-contained, reproducible code.
____________________________________________________________
FREE 3D EARTH SCREENSAVER - Watch the Earth right on your desktop!
Check it out at http://www.inbox.com/earth [http://www.inbox.com/earth] [
http://www.inbox.com/earth [http://www.inbox.com/earth]]
This e-Mail may contain proprietary and confidential information and is
sent for the intended recipient(s) only. If by an addressing or
transmission error this mail has been misdirected to you, you are
requested to delete this mail immediately. You are also hereby notified
that any use, any form of reproduction, dissemination, copying,
disclosure, modification, distribution and/or publication of this e-mail
message, contents or its attachment other than by its intended recipient/s
is strictly prohibited. Visit us at http://www.polarisFT.com [
http://www.polarisft.com/]
____________________________________________________________
FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on
your desktop!
Check it out at http://www.inbox.com/marineaquarium [
http://www.inbox.com/marineaquarium]
This e-Mail may contain proprietary and confidential information and is
sent for the intended recipient(s) only. If by an addressing or
transmission error this mail has been misdirected to you, you are
requested to delete this mail immediately. You are also hereby notified
that any use, any form of reproduction, dissemination, copying,
disclosure, modification, distribution and/or publication of this e-mail
message, contents or its attachment other than by its intended recipient/s
is strictly prohibited. Visit us at http://www.polarisFT.com
____________________________________________________________
FREE ONLINE PHOTOSHARING - Share your photos online with your friends and
family!
Visit http://www.inbox.com/photosharing to find out more!
[attachment "mohan.pdf" deleted by Mohan Radhakrishnan/CDOO/polarisFT]
This e-Mail may contain proprietary and confidential information and is sent
for the intended recipient(s) only. If by an addressing or transmission error
this mail has been misdirected to you, you are requested to delete this mail
immediately. You are also hereby notified that any use, any form of
reproduction, dissemination, copying, disclosure, modification, distribution
and/or publication of this e-mail message, contents or its attachment other
than by its intended recipient/s is strictly prohibited.
Visit us at http://www.polarisFT.com
[[alternative HTML version deleted]]
______________________________________________
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
