Hi John, Thank you for all the information and advices. Highly appreciated your help. Aftter using the nmax it worked finely.
Thanks Best Regrds, Nishani Musafer ________________________________________ From: r-help-boun...@r-project.org [r-help-boun...@r-project.org] On Behalf Of Jon Olav Skoien [jon.sko...@jrc.ec.europa.eu] Sent: Tuesday, March 19, 2013 11:40 PM To: r-help@r-project.org Subject: Re: [R] Cokriging Nishani, we do not have access to your data, but I guess the problem is the size of the observation data set. I think the default of predict.gstat is to create one covariance matrix between all observation locations, which would be a 50,000*50,000 matrix in your case. The alternative is to do kriging in a local neighbourhood, with the argument nmax, eg. equal to 20 (or maybe larger if the size of blocks is large compared to the distance between observations. Just as a note, you define the projection of your data to be epsg:28992. This is a Dutch projection used for the meuse data in the examples of gstat and automap, but is most likely not the projection if you are using data from Australia (your email address). Try to find the correct projection of your data or leave it empty if you are sure that both observation data and the grid is in the same projection (and not lat-long). Best wishes, Jon BTW, you are more likely to get quicker response to questions like this on the mailinglist r-sig-geo. On 19-Mar-13 2:03, Gnai Nishani Musafer wrote: > Dear All, > > I run following code to estimate the blocks using cokriging ( my data set has > more than 50,000 data points). All the things run finely but Once I run the > predict.gstat function it gave the error message - "memory.c", line 58: can't > allocate memory in function m_get(). I run this code on LINUX sever but > result is same. Would any one please be able to give a solution for this? Any > advice regarding this highly appreciated. > > Note: same error message gave when I was using krige function . Then I > changed the code and add a loop to estimate the one by one. It worked. But > this technique not work for cokiriging it gives the same error message. > > require(gstat) > require(automap) > data_c <- read.csv("cu_s_data.csv", header=T) > grid<- read.csv("grid.csv", header=T) > > > coordinates(data_c) <- ~X+Y+Z > coordinates(grid) <- ~x+y+z > proj4string(grid)=CRS("+init=epsg:28992") > proj4string(data_c)=CRS("+init=epsg:28992") > g <- gstat(id = "Cu", formula =Cu~1,data = data_c) > g <- gstat(g, id = "S", formula = S~1,data =data_c) > g <- gstat(g, id = c("Cu", "S"), model = vgm(cov(data_c$Cu,data_c$S) , "Sph", > 200, 0)) > g<fit.lmc(variogram(g),g,model=vgm(psill=cov(data_c$Cu,data_c$S),model="Sph",range=200,nugget=0)) > k.c <- predict.gstat(g, grid,block = c(30,30,15)) > > > Thanks and Regards, > Nishani Musafer > > ______________________________________________ > R-help@r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. -- Jon Olav Skøien Joint Research Centre - European Commission Institute for Environment and Sustainability (IES) Land Resource Management Unit Via Fermi 2749, TP 440, I-21027 Ispra (VA), ITALY jon.sko...@jrc.ec.europa.eu Tel: +39 0332 789206 Disclaimer: Views expressed in this email are those of the individual and do not necessarily represent official views of the European Commission. ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.