Note that the problem is not that you got the message, but an apparent
whitespace issue in the output. That's clearer in this version: note that
the output for reg-IO.Rout.save is shifted left one column. But I don't
trust email to transmit these things faithfully (especially after the last
two days of encoding issues).
So the problem is most likely either the way reg-IO.Rout.save got unpacked
or your 'diff' function.
You don't mention an OS, but my recollection is that you usually use
Linux. I *have* seen an error in this test on Cygwin, where the issue was
the unpacking by tar.
If this is Linux, it has been tested successfully many times by others,
and I don't recall any change to that test since 2.6.2 (and nor do the SVN
logs).
On Fri, 25 Apr 2008, Patrick Connolly wrote:
> I installed R-2.7.0 from the tar.gz file. It's the end of make check
> that my question is about.
>
> make[3]: Entering directory `/usr/local/R-2.7.0/tests'
> make[3]: `reg-tests-1.Rout' is up to date.
> make[3]: `reg-tests-2.Rout' is up to date.
> running code in 'reg-IO.R' ... OK
> comparing 'reg-IO.Rout' to './reg-IO.Rout.save' ...44c44
> < In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> ---
>> In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> 88c88
> < In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> ---
>> In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> 111c111
> < In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> ---
>> In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> 134c134
> < In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> ---
>> In readLines("testIO.R") : incomplete final line found on 'testIO.R'
> make[3]: *** [reg-IO.Rout] Error 1
> make[3]: Leaving directory `/usr/local/R-2.7.0/tests'
> make[2]: *** [test-Reg] Error 2
> make[2]: Leaving directory `/usr/local/R-2.7.0/tests'
> make[1]: *** [test-all-basics] Error 1
> make[1]: Leaving directory `/usr/local/R-2.7.0/tests'
> make: *** [check] Error 2
>
>
> When I look at testIO.R, it seems indeed to be designed to have a
> missing CR at the end. Is this simply testing to see if it is found,
> or does the fact that it exits with Error 2 mean that it's not going
> onto other tests? It did seem to be rather a lot shorter than I
> remember other installations.
That's a late test, but it did terminate with an error.
>
> I did not have any difficulty in installing the lme4 package and its
> dependencies which might indicate that the installation has been
> successful.
>
> Do I have any cause for concern?
Some, but with your toolset.
>
>
> --
> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.
> ___ Patrick Connolly
> {~._.~} Great minds discuss ideas
> _( Y )_ Middle minds discuss events
> (:_~*~_:) Small minds discuss people
> (_)-(_) ..... Anon
>
> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.
>
> ______________________________________________
> R-help@r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>
--
Brian D. Ripley, [EMAIL PROTECTED]
Professor of Applied Statistics, http://www.stats.ox.ac.uk/~ripley/
University of Oxford, Tel: +44 1865 272861 (self)
1 South Parks Road, +44 1865 272866 (PA)
Oxford OX1 3TG, UK Fax: +44 1865 272595
______________________________________________
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
