qmail Digest 25 Mar 2000 11:00:01 -0000 Issue 951
Topics (messages 39018 through 39040):
Adding X-Deliver-To Header for Virtual Domains
39018 by: Chris Bond
39024 by: iv0
unsubscribe qmail
39019 by: Marvel Carvalho
How I delay the sending of a message?
39020 by: Eduardo Calder�n Chao
Re: Qmail-pop3d
39021 by: Support
proxying mail through to another system
39022 by: Shaun Gibson
qmail and coda - follow ...
39023 by: Thomas Mangin Office
courier-imap & vchkpw
39025 by: Derek Smith
39027 by: Christopher Seawood
Re: Qmail Forward
39026 by: Dave Sill
Queue Frozen
39028 by: imherk.hushmail.com
39032 by: markd.bushwire.net
Re: web mail
39029 by: Shad Young
39034 by: Olivier M.
another users/assign file question
39030 by: Brad Kanipe
help qmail + fastforward + mailing list
39031 by: G.Z.
Spam bill passes House subcommittee
39033 by: vogelke.c17mis.region2.wpafb.af.mil
MX records changed, but mails still go through old mailserver...
39035 by: Gabriel Ambuehl
39036 by: Chris Johnson
Create Maildir automatically when a new user is added
39037 by: swilson.alabama.aaa.com
39038 by: Chad Day
39039 by: Antonio Dias
Another (slightly different) cr lf question
39040 by: thomas
Administrivia:
To unsubscribe from the digest, e-mail:
[EMAIL PROTECTED]
To subscribe to the digest, e-mail:
[EMAIL PROTECTED]
To bug my human owner, e-mail:
[EMAIL PROTECTED]
To post to the list, e-mail:
[EMAIL PROTECTED]
----------------------------------------------------------------------
Hi,
How can I add a header X-Deliver-To that has final destination of the
email. The reason I need to do this is because the To or CC header is not
enough information for a program to deliver the mail correctly.
The domain in question I need to do this with is a "Virtual Domain" setup
in qmail. To some extent this already exists in the header Delivered-To,
the only problem is it looks like the following:
Delivered-To: [EMAIL PROTECTED]
If you can remove the virtual username and dash and put this into the
X-Deliver-To header this would slove the problem in a stroke.
Thanks,
Chris
Chris Bond wrote:
>
> Hi,
>
> How can I add a header X-Deliver-To that has final destination of the
> email. The reason I need to do this is because the To or CC header is not
> enough information for a program to deliver the mail correctly.
>
> The domain in question I need to do this with is a "Virtual Domain" setup
> in qmail. To some extent this already exists in the header Delivered-To,
> the only problem is it looks like the following:
>
> Delivered-To: [EMAIL PROTECTED]
>
> If you can remove the virtual username and dash and put this into the
> X-Deliver-To header this would slove the problem in a stroke.
>
> Thanks,
> Chris
We've done that with the development version of vpopmail 3.4.12.
Instead of a header that has: virtualdomain-user@virtualdomain
It puts user@virtualdomain
Ken Jones
http://www.inter7.com/vpopmail/
Hi,
Is it posible to inject a message, but that the qmail does not try to
send it until within two days, for example?
Thanks,
Eduardo
Thanks for all your help. It all seemed to be working.
But for some reason if you generate email from the machine it gets sent. But
any email that come from another machine just seems to vanish. How can I
trace the email from the time it get recived till the time it should have
been sent out to the internet.
Could you or someone on the list send me in the rite direction for the info
or give me some help. Thanks.
Sorry to be a novice at MTA's but just begining at MTA's I can do most other
things needed.
> On Thu, Mar 23, 2000 at 04:38:48PM +1100, Support wrote:
> > supervise /var/lock/qmail-smtpd tcpserver -v -x
> > /etc/tcp.smtp.cdb -u$USERID -g$GROUPID 0 25 \
> > rblsmtpd qmail-smtpd 2>&1 | setuser qmaill accustamp | \
> > setuser qmaill cyclog -s5000000 -n5 /var/log/qmail/qmail-smtpd &
> >
> > Thats what is listed in rc.local and all seems to run execpt relay by
> > tcp.smtp.cdb
> >
> > 127.0.0.1:allow,RELAYCLIENT=""
> > 203.42.152.:allow,REALYCLIENT=""
> ^^^^^^^^^^^
> You have a typo here. REALYCLIENT should be RELAYCLIENT.
>
> Chris
Hi there
I have a situation with my new (qmail & ldap) and old (post.office)
systems. The old system holds the bulk of the mailboxes. I need some
suggestions for the following :
1) I need to be able to hand (proxy?) connections to the post.office
system if a lookup in the ldap/qmail system returns that the mailbox is
not local to that box. The proviso for this is that the envelope must
remain unmodified.
Any suggestions would be greatly appreciated.
--
Shaun Gibson
------------------------------------------------------------------------------------
Associate Unix and NT System Adminstrator Tel :
+27-11-2667800 ext 8023
Intekom, Midrand, South Africa
-----------------------------------------------------------------------------------
Hello,
After trying to setup coda on two computers in order to create a replicated
directory,
I am on the way to give up ... The documentation isn't the best I ever see.
Does anyone already succeed to create a replicated "user partition" to
remove the
"mail server" single point of failure .
In case of so already succeed what I am trying to do any advise will be
welcome
Regards,
Thomas Mangin
System Adminitrator
Legend Internet Ltd.
Hi,
I can't seem to get courier-imap to compile using vchkpw as the
authentication method.
What I am doing is (as it doesn't seem to detect vchkpw is installed)
specifying --with-authvchkpw, but it doesn't even compile the vchkpw
module.
Can someone tell me how to configure vchkpw as the authentication module
for courier-imap either via options passed to configure, or by forcing
courier-imap to see that vchkpw is installed.
Cheers,
Del.
Derek Smith wrote:
>
> I can't seem to get courier-imap to compile using vchkpw as the
> authentication method.
I had a similar problem a couple of days ago. It seems that my compiler
(gcc 2.95.2) doesn't like the way courier-imap is including vchkpw
headers. I'm not even sure if vpopmail_config's use of '#include
"~vpopmail/include/config.h"' is valid C at all. The attached patch
makes vpopmail_config.h a generated file using the vpopmail homedir as
detected in configure. After you apply the patch, you'll need to run
automake in the topsrcdir & autoconf in authlib.
- cls
--- courier-imap-0.30/authlib/vpopmail_config.h.in.cls Mon Mar 20 11:45:39 2000
+++ courier-imap-0.30/authlib/vpopmail_config.h.in Mon Mar 20 11:45:50 2000
@@ -0,0 +1 @@
+#include "@vpopmail_home@/include/config.h"
--- courier-imap-0.30/authlib/configure.in.cls Mon Feb 28 20:48:49 2000
+++ courier-imap-0.30/authlib/configure.in Mon Mar 20 11:46:23 2000
@@ -564,4 +564,4 @@
AC_SUBST(AUTHMODULES)
AC_SUBST(LIBAUTH)
-AC_OUTPUT(Makefile html2man.pl authlib.html modulelist configlist)
+AC_OUTPUT(Makefile html2man.pl authlib.html modulelist configlist vpopmail_config.h)
Sandy Pleyte <[EMAIL PROTECTED]> wrote:
>I cant execute qmail-queue as a user (it says bash:
>/var/qmail/bin/qmail-queue: Operation not permitted ), so what's wrong ?
Your system is apparently configured not to allow setuid programs from
the filesystem upon which /var/qmail/bin resides.
-Dave
This worked a few days ago but for some reason stopped. When I send nothing
happens in the logs and mail doesn't go out. I can receive and use fetchmail.
Typing mailq yeilds all the messages I've tried to send. This is an example:
20m 443 12YWFG-0002IS-00 <[EMAIL PROTECTED]> *** frozen ***
[EMAIL PROTECTED]
If anyone knows why I'm not getting errors and the queue isn't sending please
let me know. Thanks!
herk
IMPORTANT NOTICE: If you are not using HushMail, this message could have been read
easily by the many people who have access to your open personal email messages.
Get your FREE, totally secure email address at http://www.hushmail.com.
On Fri, Mar 24, 2000 at 08:03:49AM -0400, [EMAIL PROTECTED] wrote:
> This worked a few days ago but for some reason stopped. When I send nothing
> happens in the logs and mail doesn't go out. I can receive and use fetchmail.
> Typing mailq yeilds all the messages I've tried to send. This is an example:
>
> 20m 443 12YWFG-0002IS-00 <[EMAIL PROTECTED]> *** frozen ***
> [EMAIL PROTECTED]
This doesn't look like qmail output to me. What makes you think it is qmail?
Regards.
>
> If anyone knows why I'm not getting errors and the queue isn't sending please
> let me know. Thanks!
>
> herk
>
>
> IMPORTANT NOTICE: If you are not using HushMail, this message could have been read
>easily by the many people who have access to your open personal email messages.
> Get your FREE, totally secure email address at http://www.hushmail.com.
>
>
>
Michael Boman wrote:
>
> Try SqWebMail - it's faaaast... http://www.inter7.com/sqwebmail
>
> Best regards
> Michael Boman
I'll give it a shot, thanks for the info.
Shad
--
"Fear is the foundation of obedience." Vladimir Lenin
"Without fanaticism one cannot accomplish anything." Evita Peron
"...in order to punish less often, punish more severely." Napoleon
Bonaparte
On Fri, Mar 24, 2000 at 11:50:22AM -0500, Shad Young wrote:
> Michael Boman wrote:
> >
> > Try SqWebMail - it's faaaast... http://www.inter7.com/sqwebmail
> I'll give it a shot, thanks for the info.
You can also try omail, which don't require vpopmail to work,
and works nicely with vmailmgr. http://webmail.omnis.ch ,
and then click on the About button.
Greetings,
Olivier
I'm using qmail / vpopmail both latest versions.
I've set up my users/assign file to look like this.
+bbb.com-:bbb.com:1007:7004:/export/home/vpopmail/domains/bbb.com:-::
+aaa.com-:aaa.com:1007:7004:/export/home/vpopmail/domains/bbb.com:-::
.
Basically I want all mail coming in addressed to aaa.com to go to the
bbb.com domain
aaa.com has an MX record pointing to bbb.com
The way I read the man page relating to the assign file was anything
coming in to aaa.com will be delivered to wherever I tell it the mailbox
is in the assign file.
when I send to [EMAIL PROTECTED] it should go to
/export/home/vpopmail/domains/bbb.com where brad's home mail directory
exists, but the error message is error:
Sorry,_no_mailbox_here_by_that_name._(#5.1.1)/
and yes I did run qmail-newu after editing the assign file.
Any thoughts?
Hi,
I have just moved to qmail on a system working with zmailer plus listar
(www.listar.org) for managing mailing-lists.
I have installed fastforward, created /etc/aliases etc. and still have
several problems:
when I write to listar@mydomain the alias reads
listar: "|/home/listar/listar"
but mail is delivered to the Mailbox of the listar account
when i write to mylist@mydomain I get an error message in qmail log like
delivery 1: deferral: sh:_/home/listar/listar:Permission_denied/
I went into the doc of listar, which says "make sure that listar is a
trusted user of sendmail", but since I am a newbie I can't translate this
to qmail...
I guess I have some permissions wrong on listar?
Any help is greatly appreciated!
Gennaro Zezza
PS I tried to use .qmail-listname in /var/qmail/alias but that doesn't
change anything
Some good news on the spam front, assuming any of this is enforceable...
http://www.computerworld.com/home/print.nsf/CWFlash/000323CD6A
03/23/2000
The House Commerce Subcommittee on Telecommunications, Trade and Consumer
Protection passed a bill today requiring spam to be identified as such and
allowing individuals to sue spammers, according to a statement.
--
Karl Vogel
ASC/YCOA, Wright-Patterson AFB, OH 45433, USA
[EMAIL PROTECTED] or [EMAIL PROTECTED]
Hello,
I changed the MX records for buz.ch on Thursday
from
mail.buz.ch. IN A 209.15.28.27
mail.buz.ch. IN MX 10 mail.buz.ch.
to
mail.buz.ch. IN A 195.49.62.125
mail.buz.ch. IN MX 10 mail.buz.ch.
Bind accepted the changes and all DNS servers outside our own network I
queried about mail.buz.ch are showing up the new IP, eg:
E:\>nslookup mail.buz.ch ns1.sunrise.ch
Server: ns1.sunrise.ch
Address: 193.192.227.3
Nicht-autorisierte Antwort:
Name: mail.buz.ch
Address: 195.49.62.125
but mails are still handled by the old mailserver. If I use the new one as
SMTP server directly, the mails are delivered locally (using qmail and
vpopmail). Has anyone got an idea what's going on here?
TIA,
Gabriel
On Fri, Mar 24, 2000 at 08:51:25PM -0000, Gabriel Ambuehl wrote:
> Hello,
> I changed the MX records for buz.ch on Thursday
> from
> mail.buz.ch. IN A 209.15.28.27
> mail.buz.ch. IN MX 10 mail.buz.ch.
>
> to
>
> mail.buz.ch. IN A 195.49.62.125
> mail.buz.ch. IN MX 10 mail.buz.ch.
>
> Bind accepted the changes and all DNS servers outside our own network I
> queried about mail.buz.ch are showing up the new IP, eg:
>
> E:\>nslookup mail.buz.ch ns1.sunrise.ch
> Server: ns1.sunrise.ch
> Address: 193.192.227.3
>
> Nicht-autorisierte Antwort:
> Name: mail.buz.ch
> Address: 195.49.62.125
>
> but mails are still handled by the old mailserver. If I use the new one as
> SMTP server directly, the mails are delivered locally (using qmail and
> vpopmail). Has anyone got an idea what's going on here?
How long ago did you make the change, and what were the TTLs on the records
before you made the change? It's possible that some outside DNS caches still
have the old records cached.
Chris
I am running qmail 1.03 on Red Hat Linux 6.1(followed LWQ step by step) with
qmail-pop3d. I want a Maildir created automatically each time I create a new
user. How do I do this?
Scott Wilson
Information Systems Manager
AAA Alabama
(205) 978-7051
Fax: (205) 978-7027
[EMAIL PROTECTED]
Search the mail archives on how to do this by using a skeleton, should help
you out.
Chad
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 24, 2000 5:00 PM
To: 'Qmail mailing list'
Subject: Create Maildir automatically when a new user is added
I am running qmail 1.03 on Red Hat Linux 6.1(followed LWQ step by step) with
qmail-pop3d. I want a Maildir created automatically each time I create a new
user. How do I do this?
Scott Wilson
Information Systems Manager
AAA Alabama
(205) 978-7051
Fax: (205) 978-7027
[EMAIL PROTECTED]
Scott,
On Fri, 24 Mar 2000 [EMAIL PROTECTED] wrote:
> I am running qmail 1.03 on Red Hat Linux 6.1(followed LWQ step by step) with
> qmail-pop3d. I want a Maildir created automatically each time I create a new
> user. How do I do this?
For Slackware you can do this as root:
cd /etc/skel
/var/qmail/bin/maildirmake Maildir
I believe this work for other distributions too. Give it a try.
Best regards,
Antonio Dias
Is there an easy way to have qmail either not do the crlf -> lf translation
on files it delivers locally, or is there any easy way to undo this? We have
IMAP clients accessing these files directly off the unix box, and they miss
the cr
Thanks
thomasI
