Hi Francesco In my experience, QGIS reads gepackages very slowly if they are on a shared drive (NAS/SMB). I have to make them read-only to get decent performance.
Árni Geirsson *Alta ehf* // +354 582 5003 // +354 897 9549 On Thu, 10 Dec 2020 at 14:59, Alessandro Pasotti <apaso...@gmail.com> wrote: > On Thu, Dec 10, 2020 at 3:41 PM Francesco Pelullo <f.pelu...@gmail.com> > wrote: > > > > Hi all, > > > > I'm running QGIS 3.10 LTR on Windows 10. > > > > My project has 6 .gpkg files connected, everyone of these has 14 layers > with points geometries, every layer counts about 16.000 features. > > > > So my QGIS project manage about 1.344.000 points, not used at same time. > > > > When i open this project, QGIS needs about 15 minutes for go ready. > > > > Instead, if i store these points in separate .TXT files, QGIS needs only > few seconds for load layers and go ready. Also .shp layer format seems more > performant than .gpkg > > > > It seems to me that they are not really efficient for these points > layers. > > > > Is this a my problem? Or there are some tricks i could use? > > > > > Hi, > > if you can share your project and data we can check if it also happens > on other machines or if it is a local issue. > > But first you should also check if the issue is still valid with QGIS 3.16. > > Regards > > -- > Alessandro Pasotti > QCooperative: www.qcooperative.net > ItOpen: www.itopen.it > _______________________________________________ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user >
_______________________________________________ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
