Hi All, I have analysed my code and added the usb configuration while spawning the guest CMM. Unfortunately still the usb is not visible. Could you please help me on this. I added this config "-usb -usbdevice host:090c:1000 " . you can see in the last but one line Following is my config
/bin/qemu-system-x86_64 -aos cmm -smp 2 -m 3072 -aosimage /flash/working/Mos.img -device virtio-prestera --enable-kvm -machine accel=kvm -qmp tcp:127.0.0.1:11364,server,nowait -netdev type=tap,id=eth0,ifname=tun0cmm,script=no,downscript=no -device virtio-net-pci,netdev=eth0,mac=2c:fa:a2:0a:29:46 -netdev type=tap,id=eth1,ifname=tun1cmm,script=no,downscript=no -device virtio-net-pci,netdev=eth1,mac=00:0a:1e:11:11:f8 -netdev type=tap,id=eth2,ifname=tun2cmm,script=no,downscript=no -device virtio-net-pci,netdev=eth2 -netdev type=tap,id=eth3,ifname=tun3cmm,script=no,downscript=no -device virtio-net-pci,netdev=eth3,mac=00:0a:1e:11:11:f8 -netdev type=tap,id=eth4,ifname=tun4cmm,script=no,downscript=no -device virtio-net-pci,netdev=eth4 -nographic -pidfile /CMMGuestPid -append -usb -usbdevice host:090c:1000 "console=ttyS0 empipaddr=172.17.2.189 empnetmask=255.255.255.0 empgateway=172.17.2.254 medora_early.ALU_VMSlotNum=0 medora_early.ALU_VMPrimaryA=1 medora_early.ALU_VMIsCmm=1" Have few questions please clarify. 1. Is it possible to add usb configuration once the guest is UP. That is dynamically adding the usb configuration 2. Once the configuration is done, should I unplug and plug the usb flash stick (pendrive) 3. does lsusb show usb devices at guest also Regards, Girish
