On Sat, 22 Jul 2023 21:52:06 -0700 Ira Weiny <ira.we...@intel.com> wrote:
> nifan@ wrote: > > From: Fan Ni <ni...@outlook.com> > > > > The patch series provides dynamic capacity device (DCD) emulation in Qemu. > > I don't the patches on the list. > > https://lore.kernel.org/all/sg2pr06mb33976bb3f9c47cbe08f02d09b2...@sg2pr06mb3397.apcprd06.prod.outlook.com/ > > Did they get sent? Something odd going on... They are in https://lists.nongnu.org/archive/html/qemu-devel/2023-07/msg04105.html though threading is broken. Also seems to have made it to qemu-devel on lore https://lore.kernel.org/all/sg2pr06mb3397f3e74a083607f7492fa4b2...@sg2pr06mb3397.apcprd06.prod.outlook.com/ Might be a backlog somewhere that will take a while to drain... Fan, perhaps just resend the lot and make sure the threading works so we can find them more easily. Jonathan > > Ira > > > More specifically, it provides the following functionalities: > > 1. Extended type3 memory device to support DC regions and extents. > > 2. Implemented DCD related mailbox command support in CXL r3.0: 8.2.9.8.9. > > 3. ADD QMP interfaces for adding and releasing DC extents to simulate FM > > functions for DCD described in cxl r3.0: 7.6.7.6.5 and 7.6.7.6.6. > > 4. Add new ct3d properties for DCD devices (host backend, number of dc > > regions, etc.) > > 5. Add read/write support from/to DC regions of the device. > > 6. Add mechanism to validate accessed to DC region address space. > > > > A more detailed description can be found from the previously posted RFC[1]. > > > > Compared to the previously posted RFC[1], following changes have been made: > > 1. Rebased the code on top of Jonathan's branch > > https://gitlab.com/jic23/qemu/-/tree/cxl-2023-05-25. > > 2. Extracted the rename of mem_size to a separated patch.(Jonathan) > > 3. Reordered the patch series to improve its readability.(Jonathan) > > 4. Split the validation of accesses to DC region address space as a separate > > patch. > > 5. Redesigned the QMP interfaces for adding and releasing DC extents to make > > them easier to understand and act like existing QMP interfaces (like the > > interface for cxl-inject-uncorrectable-errors). (Jonathan) > > 6. Updated dvsec range register setting to support DCD devices without > > static > > capacity. > > 7. Fixed other issues mentioned in the comments (Jonathan&Nathan Fontenot). > > 8. Fixed the format issues and checked with checkpatch.pl under qemu code > > dir. > > > > > > The code is tested with the DCD patch series at the kernel side[2]. The test > > is similar to those mentioned in the cover letter of [1]. > > > > > > [1]: > > https://lore.kernel.org/all/20230511175609.2091136-1-fan...@samsung.com/ > > [2]: > > https://lore.kernel.org/linux-cxl/649da378c28a3_968bb29420@iweiny-mobl.notmuch/T/#t > > > > Fan Ni (9): > > hw/cxl/cxl-mailbox-utils: Add dc_event_log_size field to output > > payload of identify memory device command > > hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative > > and mailbox command support > > include/hw/cxl/cxl_device: Rename mem_size as static_mem_size for > > type3 memory devices > > hw/mem/cxl_type3: Add support to create DC regions to type3 memory > > devices > > hw/mem/cxl_type3: Add host backend and address space handling for DC > > regions > > hw/mem/cxl_type3: Add DC extent list representative and get DC extent > > list mailbox support > > hw/cxl/cxl-mailbox-utils: Add mailbox commands to support add/release > > dynamic capacity response > > hw/cxl/events: Add qmp interfaces to add/release dynamic capacity > > extents > > hw/mem/cxl_type3: Add dpa range validation for accesses to dc regions > > > > hw/cxl/cxl-mailbox-utils.c | 421 +++++++++++++++++++++++++++- > > hw/mem/cxl_type3.c | 539 +++++++++++++++++++++++++++++++++--- > > hw/mem/cxl_type3_stubs.c | 6 + > > include/hw/cxl/cxl_device.h | 49 +++- > > include/hw/cxl/cxl_events.h | 16 ++ > > qapi/cxl.json | 49 ++++ > > 6 files changed, 1034 insertions(+), 46 deletions(-) > > > > -- > > 2.39.2 > > > > >
