Tyrone, Hao, ping?
On 22/12/22 16:03, Philippe Mathieu-Daudé wrote:
Hi,
(old patch)
On 11/9/20 07:20, Havard Skinnemoen wrote:
This supports reading and writing OTP fuses and keys. Only fuse reading
has been tested. Protection is not implemented.
Reviewed-by: Avi Fishman <avi.fish...@nuvoton.com>
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4...@amsat.org>
Tested-by: Alexander Bulekov <alx...@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnem...@google.com>
---
include/hw/arm/npcm7xx.h | 3 +
include/hw/nvram/npcm7xx_otp.h | 79 ++++++
hw/arm/npcm7xx.c | 29 +++
hw/nvram/npcm7xx_otp.c | 440 +++++++++++++++++++++++++++++++++
hw/nvram/meson.build | 1 +
5 files changed, 552 insertions(+)
create mode 100644 include/hw/nvram/npcm7xx_otp.h
create mode 100644 hw/nvram/npcm7xx_otp.c
+/**
+ * npcm7xx_otp_array_write - ECC encode and write data to OTP array.
+ * @s: OTP module.
+ * @data: Data to be encoded and written.
+ * @offset: Offset of first byte to be written in the OTP array.
+ * @len: Number of bytes before ECC encoding.
+ *
+ * Each nibble of data is encoded into a byte, so the number of bytes
written
+ * to the array will be @len * 2.
+ */
+extern void npcm7xx_otp_array_write(NPCM7xxOTPState *s, const void
*data,
+ unsigned int offset, unsigned int
len);
+static void npcm7xx_init_fuses(NPCM7xxState *s)
+{
+ NPCM7xxClass *nc = NPCM7XX_GET_CLASS(s);
+ uint32_t value;
+
+ /*
+ * The initial mask of disabled modules indicates the chip
derivative (e.g.
+ * NPCM750 or NPCM730).
+ */
+ value = tswap32(nc->disabled_modules);
In which endianness do you want this 32-bit fuse value to be written?
I suppose you used a little-endian host, so we want it big-endian in
the OTP? In that case it would be better to use cpu_to_be32(), to
be able to use the OTP on a big-endian host such s390x.
+ npcm7xx_otp_array_write(&s->fuse_array, &value,
NPCM7XX_FUSE_DERIVATIVE,
+ sizeof(value));
+}
For completeness:
> +static void npcm730_class_init(ObjectClass *oc, void *data)
> +{
> + NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
> +
> + /* NPCM730 is optimized for data center use, so no graphics,
etc. */
> + nc->disabled_modules = 0x00300395;
> + nc->num_cpus = 2;
> +}
> +
> +static void npcm750_class_init(ObjectClass *oc, void *data)
> +{
> + NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
> +
> + /* NPCM750 has 2 cores and a full set of peripherals */
> + nc->disabled_modules = 0x00000000;
> + nc->num_cpus = 2;
> +}
Thanks,
Phil.
