Hi All, I am facing an issue with qemu 7.2 rc2 with nvme. I have a container running Ubuntu 22.04 base image and host is running Ubuntu 22.04 (Linux node-1 5.15.0-60-generic #66-Ubuntu SMP Fri Jan 20 14:29:49 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux), and I am using vfio-pci to communicate with nvme devices. I am observing DMAR fault as following
[ 3761.999996] DMAR: DRHD: handling fault status reg 2 [ 3762.001609] DMAR: [DMA Read NO_PASID] Request device [0b:00.0] fault addr 0x1187a9000 [fault reason 0x06] PTE Read access is not set I also enabled vtd_iommu_translate and vtd_dmar_fault traces which is showing the following 2023-02-13T07:02:37.074397Z qemu-system-x86_64: vtd_iova_to_slpte: detected slpte permission error (iova=0x1187a9000, level=0x3, slpte=0x0, write=0, pasid=0xffffffff) 236498@1676271757.075075:vtd_dmar_fault sid 0xb00 fault 6 addr 0x1187a9000 write 0 2023-02-13T07:02:37.075174Z qemu-system-x86_64: vtd_iommu_translate: detected translation failure (dev=0b:00:00, iova=0x1187a9000) It seems 'vtd_iova_to_slpte()' it is returning 0 slpte resulting this issue. In our driver code (which is running in a container) we are using 0x800000000 as our IOVA base address. We have 10 nvme devices that we are initializing, and we start initialization by sending identify controller and get log page commands. Observation is sometimes the first device is getting DMAR fault, sometimes first is successfully completed identify and get log page, and second device is getting DMAR fault. Also if I use Ubuntu 20.04 as base image for the container, then this issue is not seens as seen in the following trace output 278365@1676297375.587477:vtd_dmar_slpte sid 0xb00 slpte 0x1f2556003 addr 0x800000000 write 0 278365@1676297375.587513:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x800000000 -> gpa 0x1f2556000 mask 0xfff 278365@1676297375.587527:vtd_dmar_slpte sid 0xb00 slpte 0x1f25fc003 addr 0x80020a000 write 1 278365@1676297375.587532:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x80020a000 -> gpa 0x1f25fc000 mask 0xfff 278365@1676297375.587566:vtd_dmar_slpte sid 0xb00 slpte 0x1f2560003 addr 0x800008000 write 1 278365@1676297375.587572:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x800008000 -> gpa 0x1f2560000 mask 0xfff 278365@1676297375.587814:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x800000000 -> gpa 0x1f2556000 mask 0xfff 278365@1676297375.587850:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x800008000 -> gpa 0x1f2560000 mask 0xfff 278365@1676297375.588455:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x800000000 -> gpa 0x1f2556000 mask 0xfff 278365@1676297375.588473:vtd_dmar_slpte sid 0xb00 slpte 0x1f25fe003 addr 0x80020b000 write 1 278365@1676297375.588479:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x80020b000 -> gpa 0x1f25fe000 mask 0xfff 278365@1676297375.588507:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x800008000 -> gpa 0x1f2560000 mask 0xfff 278365@1676297375.588737:vtd_dmar_translate pasid 0xffffffff: dev 0b:00.00 iova 0x800000000 -> gpa 0x1f2556000 mask 0xfff Following is the partial qemu command line that I am using -device intel-iommu,intremap=on,caching-mode=on,eim=on,device-iotlb=on,aw-bits=48 -device pcie-root-port,id=pcie-root-port0,slot=1 -drive file=/home/raghu/lfd/datadir/rs-bdc0/storage/rs-bdc0-0-0,format=qcow2,cache=unsafe,if=none,id=NVME0 -device nvme,serial=rs-bdc0-0_0,id=NVME0,bus=pcie-root-port0 -device nvme-ns,drive=NVME0,eui64=0,uuid=30303030-3030-3030-3030-303030303030 cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-5.15.0-60-generic root=UUID=102c974c-7a1c-49cf-9bdd-a8e4638cf5c4 ro console=ttyS0,115200 intel_iommu=on iommu=pt I have also tried without 'iommu=pt' producing same result in Ubuntu 22.04 base image in container, also the host OS version remains same in both cases. -R
