Am 25. Dezember 2022 12:13:57 UTC schrieb Qiang Liu <cyruscy...@gmail.com>:
There is an 'a' missing in the topic: It should be ac97, not c97.
Best regards,
Bernhard
>Section 5.10.2 of the AC97 specification (https://hands.com/~lkcl/ac97_r23.pdf)
>shows the feasibility to support for rates other than 48kHZ. Specifically,
>AC97_PCM_Front_DAC_Rate (reg 2Ch) should be from 8kHZ to 48kHZ.
>
>Before Volker Rümelin fixed it in 12f4abf6a245 and 0cbc8bd4694f, an adversary
>could leverage this to crash QEMU.
>
>Fixes: e5c9a13e2670 ("PCI AC97 emulation by malc.")
>Reported-by: Volker Rümelin <vr_q...@t-online.de>
>Reported-by: Qiang Liu <cyruscy...@gmail.com>
>Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1393
>Signed-off-by: Qiang Liu <cyruscy...@gmail.com>
>---
> hw/audio/ac97.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
>diff --git a/hw/audio/ac97.c b/hw/audio/ac97.c
>index be2dd701a4..826411e462 100644
>--- a/hw/audio/ac97.c
>+++ b/hw/audio/ac97.c
>@@ -625,9 +625,14 @@ static void nam_writew(void *opaque, uint32_t addr,
>uint32_t val)
> break;
> case AC97_PCM_Front_DAC_Rate:
> if (mixer_load(s, AC97_Extended_Audio_Ctrl_Stat) & EACS_VRA) {
>- mixer_store(s, addr, val);
>- dolog("Set front DAC rate to %d\n", val);
>- open_voice(s, PO_INDEX, val);
>+ if (val >= 8000 && val <= 48000) {
>+ mixer_store(s, addr, val);
>+ dolog("Set front DAC rate to %d\n", val);
>+ open_voice(s, PO_INDEX, val);
>+ } else {
>+ dolog("Attempt to set front DAC rate to %d, but valid is"
>+ "8-48kHZ\n", val);
>+ }
> } else {
> dolog("Attempt to set front DAC rate to %d, but VRA is not set\n",
> val);
