On 10/27/2022 6:50 PM, Jason Wang wrote:
On Fri, Oct 28, 2022 at 5:56 AM Si-Wei Liu<si-wei....@oracle.com> wrote:Hi Jason, Sorry for top posting, but are you going to queue this patch? It looks like the discussion has been settled and no further comment I got for 2 weeks for this patch.Yes, I've queued this.
Excellent, thanks Jason. I see it gets pulled. -Siwei
ThanksThanks, -Siwei On 10/13/2022 4:12 PM, Si-Wei Liu wrote:Jason, On 10/12/2022 10:02 PM, Jason Wang wrote:在 2022/10/12 13:59, Si-Wei Liu 写道:On 10/11/2022 8:09 PM, Jason Wang wrote:On Tue, Oct 11, 2022 at 1:18 AM Si-Wei Liu<si-wei....@oracle.com> wrote:On 10/8/2022 10:43 PM, Jason Wang wrote: On Sat, Oct 8, 2022 at 5:04 PM Si-Wei Liu<si-wei....@oracle.com> wrote: Similar to other vhost backends, vhostfd can be passed to vhost-vdpa backend as another parameter to instantiate vhost-vdpa net client. This would benefit the use case where only open file descriptors, as opposed to raw vhost-vdpa device paths, are accessible from the QEMU process. (qemu) netdev_add type=vhost-vdpa,vhostfd=61,id=vhost-vdpa1 Adding Cindy. This has been discussed before, we've already had vhostdev=/dev/fdset/$fd which should be functional equivalent to what has been proposed here. (And this is how libvirt works if I understand correctly). Yes, I was aware of that discussion. However, our implementation of the management software is a bit different from libvirt, in which the paths in /dev/fdset/NNN can't be dynamically passed to the container where QEMU is running. By using a specific vhostfd property with existing code, it would allow our mgmt software smooth adaption without having to add too much infra code to support the /dev/fdset/NNN trick.I think fdset has extra flexibility in e.g hot-plug to allow the file descriptor to be passed with SCM_RIGHTS.Yes, that's exactly the use case we'd like to support. Though the difference in our mgmt software stack from libvirt is that any dynamic path in /dev (like /dev/fdset/ABC or /dev/vhost-vdpa-XYZ) can't be allowed to get passed through to the container running QEMU on the fly for security reasons. fd passing is allowed, though, with very strict security checks.Interesting, any reason for disallowing fd passing?For our mgmt software stack, QEMU is running in a secured container with its own namespace(s) with minimally well known and trusted devices from root ns exposed (only) at the time when QEMU is being started. Direct fd passing via SCM_RIGHTS is allowed, but fdset device node exposure is not allowed and not even considered useful to us, as it adds an unwarranted attack surface to the QEMU's secured container unnecessarily. This has been the case and our security model for a while now w.r.t hot plugging vhost-net/tap and vhost-scsi devices, so will do for vhost-vdpa with vhostfd. It's not an open source project, though what I can share is that it's not a simple script that can be easily changed, and allow passing extra devices e.g. fdset especially on the fly is not even in consideration per suggested security guideline. I think we don't do anything special here as with other secured containers that disallow dynamic device injection on the fly.I'm asking since it's the way that libvirt work and it seems to me we don't get any complaints in the past.I guess it was because libvirt doesn't run QEMU in a container with very limited device exposure, otherwise this sort of constraints would pop up. Anyway the point and the way I see it is that passing vhostfd is proved to be working well and secure with other vhost devices, I don't see why vhost-vdpa is treated special here that would need to enforce the fdset usage. It's an edge case for libvirt maybe, but supporting QEMU's vhost-vdpa device to run in a securely contained environment with no dynamic device injection shouldn't be an odd or bizarre use case. Thanks, -SiweiThat's the main motivation for this direct vhostfd passing support (noted fdset doesn't need to be used along with /dev/fdset node). Having it said, I found there's also nuance in the vhostdev=/dev/fdset/XyZ interface besides the /dev node limitation: the fd to open has to be dup'ed from the original one passed via SCM_RIGHTS. This also has implication on security that any ioctl call from QEMU can't be audited through the original fd.I'm not sure I get this, but management layer can enforce a ioctl whiltelist for safety. ThanksWith this regard, I think vhostfd offers more flexibility than work around those qemu_open() specifics. Would these justify the use case of concern? Thanks, -SiweiIt would still be good to add the support.On the other hand, the other vhost backends, e.g. tap (via vhost-net), vhost-scsi and vhost-vsock all accept vhostfd as parameter to instantiate device, although the /dev/fdset trick also works there. I think vhost-vdpa is not unprecedented in this case?Yes. ThanksThanks, -Siwei Thanks Signed-off-by: Si-Wei Liu<si-wei....@oracle.com> Acked-by: Eugenio Pérez<epere...@redhat.com> --- v2: - fixed typo in commit message - s/fd's/file descriptors/ --- net/vhost-vdpa.c | 25 ++++++++++++++++++++----- qapi/net.json | 3 +++ qemu-options.hx | 6 ++++-- 3 files changed, 27 insertions(+), 7 deletions(-) diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c index 182b3a1..366b070 100644 --- a/net/vhost-vdpa.c +++ b/net/vhost-vdpa.c @@ -683,14 +683,29 @@ int net_init_vhost_vdpa(const Netdev *netdev, const char *name, assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA); opts = &netdev->u.vhost_vdpa; - if (!opts->vhostdev) { - error_setg(errp, "vdpa character device not specified with vhostdev"); + if (!opts->has_vhostdev && !opts->has_vhostfd) { + error_setg(errp, + "vhost-vdpa: neither vhostdev= nor vhostfd= was specified"); return -1; } - vdpa_device_fd = qemu_open(opts->vhostdev, O_RDWR, errp); - if (vdpa_device_fd == -1) { - return -errno; + if (opts->has_vhostdev && opts->has_vhostfd) { + error_setg(errp, + "vhost-vdpa: vhostdev= and vhostfd= are mutually exclusive"); + return -1; + } + + if (opts->has_vhostdev) { + vdpa_device_fd = qemu_open(opts->vhostdev, O_RDWR, errp); + if (vdpa_device_fd == -1) { + return -errno; + } + } else if (opts->has_vhostfd) { + vdpa_device_fd = monitor_fd_param(monitor_cur(), opts->vhostfd, errp); + if (vdpa_device_fd == -1) { + error_prepend(errp, "vhost-vdpa: unable to parsevhostfd:"); + return -1; + } } r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp); diff --git a/qapi/net.json b/qapi/net.json index dd088c0..926ecc8 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -442,6 +442,8 @@ # @vhostdev: path of vhost-vdpa device # (default:'/dev/vhost-vdpa-0') # +# @vhostfd: file descriptor of an already opened vhost vdpa device +# # @queues: number of queues to be created for multiqueue vhost-vdpa # (default: 1) # @@ -456,6 +458,7 @@ { 'struct': 'NetdevVhostVDPAOptions', 'data': { '*vhostdev': 'str', + '*vhostfd': 'str', '*queues': 'int', '*x-svq': {'type': 'bool', 'features' : [ 'unstable'] } } } diff --git a/qemu-options.hx b/qemu-options.hx index 913c71e..c040f74 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -2774,8 +2774,10 @@ DEF("netdev", HAS_ARG, QEMU_OPTION_netdev," configure a vhost-user network, backed by a chardev 'dev'\n" #endif #ifdef __linux__ - "-netdev vhost-vdpa,id=str,vhostdev=/path/to/dev\n" + "-netdev vhost-vdpa,id=str[,vhostdev=/path/to/dev][,vhostfd=h]\n" " configure a vhost-vdpa network,Establish a vhost-vdpa netdev\n" + " use 'vhostdev=/path/to/dev' to open a vhost vdpa device\n" + " use 'vhostfd=h' to connect to an already opened vhost vdpa device\n" #endif #ifdef CONFIG_VMNET "-netdev vmnet-host,id=str[,isolated=on|off][,net-uuid=uuid]\n" @@ -3280,7 +3282,7 @@ SRST -netdev type=vhost-user,id=net0,chardev=chr0 \ -device virtio-net-pci,netdev=net0 -``-netdev vhost-vdpa,vhostdev=/path/to/dev`` +``-netdev vhost-vdpa[,vhostdev=/path/to/dev][,vhostfd=h]`` Establish a vhost-vdpa netdev. vDPA device is a device that uses a datapath which complies with -- 1.8.3.1
