Stefan Hajnoczi <stefa...@redhat.com> 于2022年9月20日周二 03:59写道：
>
> On Sat, Sep 10, 2022 at 02:50:56PM +0800, Sam Li wrote:
> > Add file from Dmitry's "virtio-blk:add support for zoned block devices"
> > linux patch using scripts/update-linux-headers.sh. There is a link for
> > more information: https://github.com/dmitry-fomichev/virtblk-zbd
>
> Hi Sam,
> Linux headers are imported into QEMU using
> scripts/update-linux-headers.sh. Did you import the header using this
> script?
>
> If yes, please mention it in the commit description. If not, please do
> so in the next revision.
Yes, I'll change the commit description to "include: update virtio-blk
header from Linux 5.19-rc2+".
>
> Thanks,
> Stefan
>
> >
> > Signed-off-by: Sam Li <faithilike...@gmail.com>
> > ---
> > include/standard-headers/linux/virtio_blk.h | 109 ++++++++++++++++++++
> > 1 file changed, 109 insertions(+)
> >
> > diff --git a/include/standard-headers/linux/virtio_blk.h
> > b/include/standard-headers/linux/virtio_blk.h
> > index 2dcc90826a..490bd21c76 100644
> > --- a/include/standard-headers/linux/virtio_blk.h
> > +++ b/include/standard-headers/linux/virtio_blk.h
> > @@ -40,6 +40,7 @@
> > #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */
> > #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */
> > #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported
> > */
> > +#define VIRTIO_BLK_F_ZONED 17 /* Zoned block device */
> >
> > /* Legacy feature bits */
> > #ifndef VIRTIO_BLK_NO_LEGACY
> > @@ -119,6 +120,20 @@ struct virtio_blk_config {
> > uint8_t write_zeroes_may_unmap;
> >
> > uint8_t unused1[3];
> > +
> > + /* Secure erase fields that are defined in the virtio spec */
> > + uint8_t sec_erase[12];
> > +
> > + /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */
> > + struct virtio_blk_zoned_characteristics {
> > + __virtio32 zone_sectors;
> > + __virtio32 max_open_zones;
> > + __virtio32 max_active_zones;
> > + __virtio32 max_append_sectors;
> > + __virtio32 write_granularity;
> > + uint8_t model;
> > + uint8_t unused2[3];
> > + } zoned;
> > } QEMU_PACKED;
> >
> > /*
> > @@ -153,6 +168,27 @@ struct virtio_blk_config {
> > /* Write zeroes command */
> > #define VIRTIO_BLK_T_WRITE_ZEROES 13
> >
> > +/* Zone append command */
> > +#define VIRTIO_BLK_T_ZONE_APPEND 15
> > +
> > +/* Report zones command */
> > +#define VIRTIO_BLK_T_ZONE_REPORT 16
> > +
> > +/* Open zone command */
> > +#define VIRTIO_BLK_T_ZONE_OPEN 18
> > +
> > +/* Close zone command */
> > +#define VIRTIO_BLK_T_ZONE_CLOSE 20
> > +
> > +/* Finish zone command */
> > +#define VIRTIO_BLK_T_ZONE_FINISH 22
> > +
> > +/* Reset zone command */
> > +#define VIRTIO_BLK_T_ZONE_RESET 24
> > +
> > +/* Reset All zones command */
> > +#define VIRTIO_BLK_T_ZONE_RESET_ALL 26
> > +
> > #ifndef VIRTIO_BLK_NO_LEGACY
> > /* Barrier before this op. */
> > #define VIRTIO_BLK_T_BARRIER 0x80000000
> > @@ -172,6 +208,72 @@ struct virtio_blk_outhdr {
> > __virtio64 sector;
> > };
> >
> > +/*
> > + * Supported zoned device models.
> > + */
> > +
> > +/* Regular block device */
> > +#define VIRTIO_BLK_Z_NONE 0
> > +/* Host-managed zoned device */
> > +#define VIRTIO_BLK_Z_HM 1
> > +/* Host-aware zoned device */
> > +#define VIRTIO_BLK_Z_HA 2
> > +
> > +/*
> > + * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply.
> > + */
> > +struct virtio_blk_zone_descriptor {
> > + /* Zone capacity */
> > + __virtio64 z_cap;
> > + /* The starting sector of the zone */
> > + __virtio64 z_start;
> > + /* Zone write pointer position in sectors */
> > + __virtio64 z_wp;
> > + /* Zone type */
> > + uint8_t z_type;
> > + /* Zone state */
> > + uint8_t z_state;
> > + uint8_t reserved[38];
> > +};
> > +
> > +struct virtio_blk_zone_report {
> > + __virtio64 nr_zones;
> > + uint8_t reserved[56];
> > + struct virtio_blk_zone_descriptor zones[];
> > +};
> > +
> > +/*
> > + * Supported zone types.
> > + */
> > +
> > +/* Conventional zone */
> > +#define VIRTIO_BLK_ZT_CONV 1
> > +/* Sequential Write Required zone */
> > +#define VIRTIO_BLK_ZT_SWR 2
> > +/* Sequential Write Preferred zone */
> > +#define VIRTIO_BLK_ZT_SWP 3
> > +
> > +/*
> > + * Zone states that are available for zones of all types.
> > + */
> > +
> > +/* Not a write pointer (conventional zones only) */
> > +#define VIRTIO_BLK_ZS_NOT_WP 0
> > +/* Empty */
> > +#define VIRTIO_BLK_ZS_EMPTY 1
> > +/* Implicitly Open */
> > +#define VIRTIO_BLK_ZS_IOPEN 2
> > +/* Explicitly Open */
> > +#define VIRTIO_BLK_ZS_EOPEN 3
> > +/* Closed */
> > +#define VIRTIO_BLK_ZS_CLOSED 4
> > +/* Read-Only */
> > +#define VIRTIO_BLK_ZS_RDONLY 13
> > +/* Full */
> > +#define VIRTIO_BLK_ZS_FULL 14
> > +/* Offline */
> > +#define VIRTIO_BLK_ZS_OFFLINE 15
> > +
> > /* Unmap this range (only valid for write zeroes command) */
> > #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP 0x00000001
> >
> > @@ -198,4 +300,11 @@ struct virtio_scsi_inhdr {
> > #define VIRTIO_BLK_S_OK 0
> > #define VIRTIO_BLK_S_IOERR 1
> > #define VIRTIO_BLK_S_UNSUPP 2
> > +
> > +/* Error codes that are specific to zoned block devices */
> > +#define VIRTIO_BLK_S_ZONE_INVALID_CMD 3
> > +#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4
> > +#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5
> > +#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6
> > +
> > #endif /* _LINUX_VIRTIO_BLK_H */
> > --
> > 2.37.3
> >
