compatiblity->compatibility
transfered->transferred
transfering->transferring
Signed-off-by: Stefan Weil <s...@weilnetz.de>
---
hw/cirrus_vga.c | 2 +-
hw/es1370.c | 14 +++++++-------
hw/gusemu.h | 2 +-
hw/gusemu_hal.c | 2 +-
hw/omap2.c | 6 +++---
hw/pc.c | 2 +-
hw/pl181.c | 4 ++--
7 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index c7e365b..1b216e8 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -783,7 +783,7 @@ static void cirrus_bitblt_cputovideo_next(CirrusVGAState *
s)
s->cirrus_srccounter -= s->cirrus_blt_srcpitch;
if (s->cirrus_srccounter <= 0)
goto the_end;
- /* more bytes than needed can be transfered because of
+ /* more bytes than needed can be transferred because of
word alignment, so we keep them for the next line */
/* XXX: keep alignment to speed up transfer */
end_ptr = s->cirrus_bltbuf + s->cirrus_blt_srcpitch;
diff --git a/hw/es1370.c b/hw/es1370.c
index c5c16b0..6a3ba55 100644
--- a/hw/es1370.c
+++ b/hw/es1370.c
@@ -788,7 +788,7 @@ static void es1370_transfer_audio (ES1370State *s, struct
chan *d, int loop_sel,
int cnt = d->frame_cnt >> 16;
int size = d->frame_cnt & 0xffff;
int left = ((size - cnt + 1) << 2) + d->leftover;
- int transfered = 0;
+ int transferred = 0;
int temp = audio_MIN (max, audio_MIN (left, csc_bytes));
int index = d - &s->chan[0];
@@ -807,7 +807,7 @@ static void es1370_transfer_audio (ES1370State *s, struct
chan *d, int loop_sel,
temp -= acquired;
addr += acquired;
- transfered += acquired;
+ transferred += acquired;
}
}
else {
@@ -823,11 +823,11 @@ static void es1370_transfer_audio (ES1370State *s, struct
chan *d, int loop_sel,
break;
temp -= copied;
addr += copied;
- transfered += copied;
+ transferred += copied;
}
}
- if (csc_bytes == transfered) {
+ if (csc_bytes == transferred) {
*irq = 1;
d->scount = sc | (sc << 16);
ldebug ("sc = %d, rate = %f\n",
@@ -836,10 +836,10 @@ static void es1370_transfer_audio (ES1370State *s, struct
chan *d, int loop_sel,
}
else {
*irq = 0;
- d->scount = sc | (((csc_bytes - transfered - 1) >> d->shift) << 16);
+ d->scount = sc | (((csc_bytes - transferred - 1) >> d->shift) << 16);
}
- cnt += (transfered + d->leftover) >> 2;
+ cnt += (transferred + d->leftover) >> 2;
if (s->sctl & loop_sel) {
/* Bah, how stupid is that having a 0 represent true value?
@@ -853,7 +853,7 @@ static void es1370_transfer_audio (ES1370State *s, struct
chan *d, int loop_sel,
d->frame_cnt |= cnt << 16;
}
- d->leftover = (transfered + d->leftover) & 3;
+ d->leftover = (transferred + d->leftover) & 3;
}
static void es1370_run_channel (ES1370State *s, size_t chan, int free_or_avail)
diff --git a/hw/gusemu.h b/hw/gusemu.h
index 27877c0..331bb6f 100644
--- a/hw/gusemu.h
+++ b/hw/gusemu.h
@@ -83,7 +83,7 @@ void gus_dma_transferdata(GUSEmuState *state, char *dma_addr,
unsigned int count
/* it is possible to break down a single transfer into multiple ones, but take
care that: */
/* -dma_count is actually count-1 */
/* -before and during a transfer, DREQ is set and TC cleared */
-/* -when calling gus_dma_transferdata(), TC is only set true for call
transfering the last byte */
+/* -when calling gus_dma_transferdata(), TC is only set true for call
transferring the last byte */
/* -after the last transfer, DREQ is cleared and TC is set */
/* ** GF1 mixer emulation functions: */
diff --git a/hw/gusemu_hal.c b/hw/gusemu_hal.c
index 582779f..6096690 100644
--- a/hw/gusemu_hal.c
+++ b/hw/gusemu_hal.c
@@ -502,7 +502,7 @@ void gus_dma_transferdata(GUSEmuState * state, char
*dma_addr, unsigned int coun
/* this function gets called by the callback function as soon as a DMA
transfer is about to start
* dma_addr is a translated address within accessible memory, not the
physical one,
* count is (real dma count register)+1
- * note that the amount of bytes transfered is fully determined by values
in the DMA registers
+ * note that the amount of bytes transferred is fully determined by values
in the DMA registers
* do not forget to update DMA states after transferring the entire block:
* DREQ cleared & TC asserted after the _whole_ transfer */
diff --git a/hw/omap2.c b/hw/omap2.c
index 91577ae..c09c04a 100644
--- a/hw/omap2.c
+++ b/hw/omap2.c
@@ -1616,7 +1616,7 @@ static void omap_prcm_write(void *opaque,
target_phys_addr_t addr,
case 0x500: /* CM_CLKEN_PLL */
if (value & 0xffffff30)
fprintf(stderr, "%s: write 0s in CM_CLKEN_PLL for "
- "future compatiblity\n", __FUNCTION__);
+ "future compatibility\n", __FUNCTION__);
if ((s->clken[9] ^ value) & 0xcc) {
s->clken[9] &= ~0xcc;
s->clken[9] |= value & 0xcc;
@@ -1635,7 +1635,7 @@ static void omap_prcm_write(void *opaque,
target_phys_addr_t addr,
case 0x540: /* CM_CLKSEL1_PLL */
if (value & 0xfc4000d7)
fprintf(stderr, "%s: write 0s in CM_CLKSEL1_PLL for "
- "future compatiblity\n", __FUNCTION__);
+ "future compatibility\n", __FUNCTION__);
if ((s->clksel[5] ^ value) & 0x003fff00) {
s->clksel[5] = value & 0x03bfff28;
omap_prcm_dpll_update(s);
@@ -1647,7 +1647,7 @@ static void omap_prcm_write(void *opaque,
target_phys_addr_t addr,
case 0x544: /* CM_CLKSEL2_PLL */
if (value & ~3)
fprintf(stderr, "%s: write 0s in CM_CLKSEL2_PLL[31:2] for "
- "future compatiblity\n", __FUNCTION__);
+ "future compatibility\n", __FUNCTION__);
if (s->clksel[6] != (value & 3)) {
s->clksel[6] = value & 3;
omap_prcm_dpll_update(s);
diff --git a/hw/pc.c b/hw/pc.c
index 33778fe..b6dcba2 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -983,7 +983,7 @@ void pc_memory_init(MemoryRegion *system_memory,
linux_boot = (kernel_filename != NULL);
/* Allocate RAM. We allocate it as a single memory region and use
- * aliases to address portions of it, mostly for backwards compatiblity
+ * aliases to address portions of it, mostly for backwards compatibility
* with older qemus that used qemu_ram_alloc().
*/
ram = g_malloc(sizeof(*ram));
diff --git a/hw/pl181.c b/hw/pl181.c
index 46855f6..d05bc19 100644
--- a/hw/pl181.c
+++ b/hw/pl181.c
@@ -311,9 +311,9 @@ static uint64_t pl181_read(void *opaque, target_phys_addr_t
offset,
case 0x48: /* FifoCnt */
/* The documentation is somewhat vague about exactly what FifoCnt
does. On real hardware it appears to be when decrememnted
- when a word is transfered between the FIFO and the serial
+ when a word is transferred between the FIFO and the serial
data engine. DataCnt is decremented after each byte is
- transfered between the serial engine and the card.
+ transferred between the serial engine and the card.
We don't emulate this level of detail, so both can be the same. */
tmp = (s->datacnt + 3) >> 2;
if (s->linux_hack) {
--
1.7.2.5
