On 22/12/2021 08:26, yangxiaojuan wrote:
Hi, MarkOn 12/18/2021 06:02 PM, Mark Cave-Ayland wrote:On 04/12/2021 12:07, Xiaojuan Yang wrote:1.Add uart,virtio-net,vga and usb for 3A5000. 2.Add irq set and map for the pci host. Non pci device use irq 0-16, pci device use 16-64. 3.Add some unimplented device to emulate guest unused memory space. Signed-off-by: Xiaojuan Yang <yangxiaoj...@loongson.cn> Signed-off-by: Song Gao <gaos...@loongson.cn> --- hw/loongarch/Kconfig | 8 +++++ hw/loongarch/loongson3.c | 63 +++++++++++++++++++++++++++++++-- hw/pci-host/ls7a.c | 42 +++++++++++++++++++++- include/hw/intc/loongarch_ipi.h | 2 ++ include/hw/pci-host/ls7a.h | 4 +++ softmmu/qdev-monitor.c | 3 +- 6 files changed, 117 insertions(+), 5 deletions(-) diff --git a/hw/loongarch/Kconfig b/hw/loongarch/Kconfig index 468e3acc74..9ea3b92708 100644 --- a/hw/loongarch/Kconfig +++ b/hw/loongarch/Kconfig @@ -1,5 +1,13 @@ config LOONGSON3_LS7A bool + imply VGA_PCI + imply VIRTIO_VGA + imply PARALLEL + imply PCI_DEVICES + select ISA_BUS + select SERIAL + select SERIAL_ISA + select VIRTIO_PCI select PCI_EXPRESS_7A select LOONGARCH_IPI select LOONGARCH_PCH_PIC diff --git a/hw/loongarch/loongson3.c b/hw/loongarch/loongson3.c index c42f830208..e4a02e7c18 100644 --- a/hw/loongarch/loongson3.c +++ b/hw/loongarch/loongson3.c @@ -10,8 +10,11 @@ #include "qemu/datadir.h" #include "qapi/error.h" #include "hw/boards.h" +#include "hw/char/serial.h" #include "sysemu/sysemu.h" #include "sysemu/qtest.h" +#include "hw/irq.h" +#include "net/net.h" #include "sysemu/runstate.h" #include "sysemu/reset.h" #include "hw/loongarch/loongarch.h" @@ -20,6 +23,7 @@ #include "hw/intc/loongarch_pch_pic.h" #include "hw/intc/loongarch_pch_msi.h" #include "hw/pci-host/ls7a.h" +#include "hw/misc/unimp.h" static void loongarch_cpu_reset(void *opaque) @@ -91,11 +95,12 @@ static void sysbus_mmio_map_loongarch(SysBusDevice *dev, int n, memory_region_add_subregion(iocsr, addr, dev->mmio[n].memory); } -static void loongson3_irq_init(MachineState *machine) +static PCIBus *loongson3_irq_init(MachineState *machine) { LoongArchMachineState *lams = LOONGARCH_MACHINE(machine); - DeviceState *ipi, *extioi, *pch_pic, *pch_msi, *cpudev; + DeviceState *ipi, *extioi, *pch_pic, *pch_msi, *cpudev, *pciehost; SysBusDevice *d; + PCIBus *pci_bus; int cpu, pin, i; unsigned long ipi_addr; @@ -135,6 +140,10 @@ static void loongson3_irq_init(MachineState *machine) sysbus_realize_and_unref(d, &error_fatal); sysbus_mmio_map(d, 0, LS7A_IOAPIC_REG_BASE); + serial_mm_init(get_system_memory(), LS7A_UART_BASE, 0, + qdev_get_gpio_in(pch_pic, LS7A_UART_IRQ - PCH_PIC_IRQ_OFFSET), + 115200, serial_hd(0), DEVICE_LITTLE_ENDIAN); + /* Connect 64 pch_pic irqs to extioi */ for (int i = 0; i < PCH_PIC_IRQ_NUM; i++) { sysbus_connect_irq(d, i, qdev_get_gpio_in(extioi, i)); @@ -149,6 +158,35 @@ static void loongson3_irq_init(MachineState *machine) sysbus_connect_irq(d, i, qdev_get_gpio_in(extioi, i + PCH_MSI_IRQ_START)); } + + pciehost = qdev_new(TYPE_LS7A_HOST_DEVICE); + d = SYS_BUS_DEVICE(pciehost); + sysbus_realize_and_unref(d, &error_fatal); + pci_bus = PCI_HOST_BRIDGE(pciehost)->bus; + + /* Connect 48 pci irq to pch_pic */ + for (i = 0; i < LS7A_PCI_IRQS; i++) { + qdev_connect_gpio_out(pciehost, i, + qdev_get_gpio_in(pch_pic, i + LS7A_DEVICE_IRQS)); + } + + return pci_bus; +} + +/* Network support */ +static void network_init(PCIBus *pci_bus) +{ + int i; + + for (i = 0; i < nb_nics; i++) { + NICInfo *nd = &nd_table[i]; + + if (!nd->model) { + nd->model = g_strdup("virtio"); + } + + pci_nic_init_nofail(nd, pci_bus, nd->model, NULL); + } } static void loongson3_init(MachineState *machine) @@ -161,6 +199,7 @@ static void loongson3_init(MachineState *machine) MemoryRegion *address_space_mem = get_system_memory(); LoongArchMachineState *lams = LOONGARCH_MACHINE(machine); int i; + PCIBus *pci_bus = NULL; if (!cpu_model) { cpu_model = LOONGARCH_CPU_TYPE_NAME("Loongson-3A5000"); @@ -207,8 +246,26 @@ static void loongson3_init(MachineState *machine) memory_region_add_subregion(address_space_mem, 0x90000000, &lams->highmem); offset += highram_size; + /* + * There are some invalid guest memory access. + * Create some unimplemented devices to emulate this. + */ + create_unimplemented_device("ls7a-lpc", 0x10002000, 0x14); + create_unimplemented_device("pci-dma-cfg", 0x1001041c, 0x4); + create_unimplemented_device("node-bridge", 0xEFDFB000274, 0x4); + create_unimplemented_device("ls7a-lionlpc", 0x1fe01400, 0x38); + create_unimplemented_device("ls7a-node0", 0x0EFDFB000274, 0x4); + /* Initialize the IO interrupt subsystem */ - loongson3_irq_init(machine); + pci_bus = loongson3_irq_init(machine); + + /* Network card */ + network_init(pci_bus); + + /* VGA setup. Don't bother loading the bios. */ + pci_vga_init(pci_bus); + + pci_create_simple(pci_bus, -1, "pci-ohci");By passing in -1 then you're allowing the PCI code to choose a suitable device/function which feels odd for an in-built device. Is this not fixed in real hardware? Same with pci_nic_init_nofail() and pci_vga_init() which are intended for machines that don't have these devices in-built.The machine has these devices but we don't want to emulate all the devices, only emulated part devices. I don't know if it is ok to do like this.
I'm not sure I understand what you mean by part devices here - could you give an example?
LOONGARCH_SIMPLE_MMIO_OPS(FEATURE_REG, "loongarch_feature", 0x8); LOONGARCH_SIMPLE_MMIO_OPS(VENDOR_REG, "loongarch_vendor", 0x8); diff --git a/hw/pci-host/ls7a.c b/hw/pci-host/ls7a.c index a783fb2eda..06cd641573 100644 --- a/hw/pci-host/ls7a.c +++ b/hw/pci-host/ls7a.c @@ -28,6 +28,41 @@ static const VMStateDescription vmstate_ls7a_pcie = { } }; +static PCIINTxRoute ls7a_route_intx_pin_to_irq(void *opaque, int pin) +{ + PCIINTxRoute route; + + route.irq = pin; + route.mode = PCI_INTX_ENABLED; + return route; +} + +static int pci_ls7a_map_irq(PCIDevice *d, int irq_num) +{ + PCIBus *bus; + int offset, irq; + + bus = pci_get_bus(d); + if (bus->parent_dev) { + irq = pci_swizzle_map_irq_fn(d, irq_num); + return irq; + }Isn't this part already handled by the code in hw/pci/pci.c when the IRQ is asserted, for example pci_change_irq_level()?We design a different rule for the pcie devices connect to the root bridge, assign more irqs to these devices. For the pci device connect to a pcie-to-pci bridge use the common pci_swizzle_map_irq_fn to map irq.
I'm less familiar with PCIe but shouldn't the interrupt mapping for devices connected via a pcie-to-pci bridge be handled by the bridge in this case? Have a look at pci_bridge_map_irq() to see how this is used. I'd expect the pcie-to-pci bridge to map the PCI irq to your host controller irq first before calling pci_ls7a_map_irq(), which I think then becomes just a simple call to pci_swizzle_map_irq_fn()?
+ /* pci device start from irq 80 */ + offset = PCH_PIC_IRQ_OFFSET + LS7A_DEVICE_IRQS; + irq = offset + ((PCI_SLOT(d->devfn) * 4 + irq_num)) % LS7A_PCI_IRQS; + + return irq; +} + +static void pci_ls7a_set_irq(void *opaque, int irq_num, int level) +{ + LS7APCIEHost *pciehost = opaque; + int offset = PCH_PIC_IRQ_OFFSET + LS7A_DEVICE_IRQS; + + qemu_set_irq(pciehost->irqs[irq_num - offset], level); +} + static void pci_ls7a_config_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { @@ -64,10 +99,13 @@ static void ls7a_pciehost_realize(DeviceState *dev, Error **errp) LS7APCIEHost *s = LS7A_HOST_DEVICE(dev); PCIExpressHost *pex = PCIE_HOST_BRIDGE(dev); - pci->bus = pci_register_root_bus(dev, "pcie.0", NULL, NULL, s, + pci->bus = pci_register_root_bus(dev, "pcie.0", pci_ls7a_set_irq, + pci_ls7a_map_irq, s, get_system_memory(), get_system_io(), PCI_DEVFN(1, 0), 128, TYPE_PCIE_BUS); + pci_bus_set_route_irq_fn(pci->bus, ls7a_route_intx_pin_to_irq); + memory_region_init_io(&s->pci_conf, OBJECT(dev), &pci_ls7a_config_ops, pci->bus, "ls7a_pci_conf", HT1LO_PCICFG_SIZE); @@ -137,6 +175,8 @@ static void ls7a_pciehost_initfn(Object *obj) object_initialize_child(obj, "ls7a_pci", ls7a_pci, TYPE_LS7A_PCIE); qdev_prop_set_int32(DEVICE(ls7a_pci), "addr", PCI_DEVFN(0, 0)); qdev_prop_set_bit(DEVICE(ls7a_pci), "multifunction", false); + + qdev_init_gpio_out(DEVICE(obj), s->irqs, LS7A_PCI_IRQS); } static const char *ls7a_pciehost_root_bus_path(PCIHostState *host_bridge, diff --git a/include/hw/intc/loongarch_ipi.h b/include/hw/intc/loongarch_ipi.h index d2397e53e7..1113c3b1a8 100644 --- a/include/hw/intc/loongarch_ipi.h +++ b/include/hw/intc/loongarch_ipi.h @@ -8,6 +8,8 @@ #ifndef HW_LOONGARCH_IPI_H #define HW_LOONGARCH_IPI_H +#include "hw/sysbus.h" + /* Mainy used by iocsr read and write */ #define SMP_IPI_MAILBOX 0x1000ULL #define CORE_STATUS_OFF 0x0 diff --git a/include/hw/pci-host/ls7a.h b/include/hw/pci-host/ls7a.h index ac938d6d5f..3b9ad1e175 100644 --- a/include/hw/pci-host/ls7a.h +++ b/include/hw/pci-host/ls7a.h @@ -37,6 +37,9 @@ #define LS7A_DEVICE_IRQS 16 #define LS7A_PCI_IRQS 48 +#define LS7A_UART_IRQ (PCH_PIC_IRQ_OFFSET + 2) +#define LS7A_UART_BASE 0x1fe001e0 + struct LS7APCIState { /*< private >*/ PCIDevice parent_obj; @@ -51,6 +54,7 @@ typedef struct LS7APCIEHost { LS7APCIState pci_dev; + qemu_irq irqs[LS7A_PCI_IRQS]; MemoryRegion pci_conf; MemoryRegion pci_io; } LS7APCIEHost; diff --git a/softmmu/qdev-monitor.c b/softmmu/qdev-monitor.c index 01f3834db5..49491d74a1 100644 --- a/softmmu/qdev-monitor.c +++ b/softmmu/qdev-monitor.c @@ -60,7 +60,8 @@ typedef struct QDevAlias QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \ QEMU_ARCH_MIPS | QEMU_ARCH_PPC | \ QEMU_ARCH_RISCV | QEMU_ARCH_SH4 | \ - QEMU_ARCH_SPARC | QEMU_ARCH_XTENSA) + QEMU_ARCH_SPARC | QEMU_ARCH_XTENSA | \ + QEMU_ARCH_LOONGARCH)This part looks like it belongs to another patch?OK, I will put this part to a separate patch. Thanks, Xiaojuan#define QEMU_ARCH_VIRTIO_CCW (QEMU_ARCH_S390X) #define QEMU_ARCH_VIRTIO_MMIO (QEMU_ARCH_M68K)
ATB, Mark.
