Am 23.09.21 um 15:04 schrieb Paolo Bonzini:
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pa...@linux.ibm.com>
Cc: Hanna Reitz <hre...@redhat.com>
Cc: Kevin Wolf <kw...@redhat.com>
Cc: qemu-bl...@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to
power of 2", 2021-06-25)
This sneaked in shortly before the 6.1 release (between rc0 and rc1 I think).
Shouldnt that go to stable in cass this still exist?
Signed-off-by: Paolo Bonzini <pbonz...@redhat.com>
---
block/block-backend.c | 6 ++++++
block/file-posix.c | 2 +-
block/io.c | 1 +
hw/scsi/scsi-generic.c | 2 +-
include/block/block_int.h | 7 +++++++
include/sysemu/block-backend.h | 1 +
6 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/block/block-backend.c b/block/block-backend.c
index 6140d133e2..ba2b5ebb10 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -1986,6 +1986,12 @@ uint32_t blk_get_max_transfer(BlockBackend *blk)
return ROUND_DOWN(max, blk_get_request_alignment(blk));
}
+int blk_get_max_hw_iov(BlockBackend *blk)
+{
+ return MIN_NON_ZERO(blk->root->bs->bl.max_hw_iov,
+ blk->root->bs->bl.max_iov);
+}
+
int blk_get_max_iov(BlockBackend *blk)
{
return blk->root->bs->bl.max_iov;
diff --git a/block/file-posix.c b/block/file-posix.c
index cb9bffe047..1567edb3d5 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -1273,7 +1273,7 @@ static void raw_refresh_limits(BlockDriverState *bs,
Error **errp)
ret = hdev_get_max_segments(s->fd, &st);
if (ret > 0) {
- bs->bl.max_iov = ret;
+ bs->bl.max_hw_iov = ret;
}
}
}
diff --git a/block/io.c b/block/io.c
index a19942718b..f38e7f81d8 100644
--- a/block/io.c
+++ b/block/io.c
@@ -136,6 +136,7 @@ static void bdrv_merge_limits(BlockLimits *dst, const
BlockLimits *src)
dst->min_mem_alignment = MAX(dst->min_mem_alignment,
src->min_mem_alignment);
dst->max_iov = MIN_NON_ZERO(dst->max_iov, src->max_iov);
+ dst->max_hw_iov = MIN_NON_ZERO(dst->max_hw_iov, src->max_hw_iov);
}
typedef struct BdrvRefreshLimitsState {
diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
index 665baf900e..0306ccc7b1 100644
--- a/hw/scsi/scsi-generic.c
+++ b/hw/scsi/scsi-generic.c
@@ -180,7 +180,7 @@ static int scsi_handle_inquiry_reply(SCSIGenericReq *r,
SCSIDevice *s, int len)
page = r->req.cmd.buf[2];
if (page == 0xb0) {
uint64_t max_transfer = blk_get_max_hw_transfer(s->conf.blk);
- uint32_t max_iov = blk_get_max_iov(s->conf.blk);
+ uint32_t max_iov = blk_get_max_hw_iov(s->conf.blk);
assert(max_transfer);
max_transfer = MIN_NON_ZERO(max_transfer, max_iov *
qemu_real_host_page_size)
diff --git a/include/block/block_int.h b/include/block/block_int.h
index f1a54db0f8..c31cbd034a 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -702,6 +702,13 @@ typedef struct BlockLimits {
*/
uint64_t max_hw_transfer;
+ /* Maximal number of scatter/gather elements allowed by the hardware.
+ * Applies whenever transfers to the device bypass the kernel I/O
+ * scheduler, for example with SG_IO. If larger than max_iov
+ * or if zero, blk_get_max_hw_iov will fall back to max_iov.
+ */
+ int max_hw_iov;
+
/* memory alignment, in bytes so that no bounce buffer is needed */
size_t min_mem_alignment;
diff --git a/include/sysemu/block-backend.h b/include/sysemu/block-backend.h
index 29d4fdbf63..82bae55161 100644
--- a/include/sysemu/block-backend.h
+++ b/include/sysemu/block-backend.h
@@ -211,6 +211,7 @@ uint32_t blk_get_request_alignment(BlockBackend *blk);
uint32_t blk_get_max_transfer(BlockBackend *blk);
uint64_t blk_get_max_hw_transfer(BlockBackend *blk);
int blk_get_max_iov(BlockBackend *blk);
+int blk_get_max_hw_iov(BlockBackend *blk);
void blk_set_guest_block_size(BlockBackend *blk, int align);
void *blk_try_blockalign(BlockBackend *blk, size_t size);
void *blk_blockalign(BlockBackend *blk, size_t size);
