On Wed, 15 Sept 2021 at 05:28, Markus Armbruster <arm...@redhat.com> wrote:
>
> Peter Maydell <peter.mayd...@linaro.org> writes:
> > I'm not sure how best to sort this tangle out. We could:
> > * make controller devices pass in NULL as bus name; this
> > means that some bus names will change, which is an annoying
> > breakage but for these minor bus types we can probably
> > get away with it. This brings these buses into line with
> > how we've been handling uniqueness for ide and scsi.
>
> To gauge the breakage, we need a list of the affected bus names.
Looking through, there are a few single-use or special
purpose buses I'm going to ignore for now (eg vmbus, or
the s390 ones). The four big bus types where controllers
often specify a bus name and override the 'autogenerate
unique name' handling are pci, ssi, sd, and i2c. (pci mostly
gets away with it I expect by machines only having one pci
bus.) Of those, I've gone through i2c. These are all the
places where we create a specifically-named i2c bus (via
i2c_init_bus()), together with the affected boards:
hw/arm/pxa2xx.c
- the PXA SoC code creates both the intended-for-use
i2c buses (which get auto-names) and also several i2c
buses intended for internal board-code use only which
are all given the same name "dummy".
Boards: connex, verdex, tosa, mainstone, akita, spitz,
borzoi, terrier, z2
hw/arm/stellaris.c
- The i2c controller names its bus "i2c". There is only one i2c
controller on these boards, so no name conflicts.
Boards: lm3s811evb, lm3s6965evb
hw/display/ati.c
- The ATI VGA device has an on-board i2c controller which it
connects the DDC that holds the EDID information. The bus is
always named "ati-vga.ddc", so if you have multiple of this
PCI device in the system the buses have the same names.
hw/display/sm501.c
- Same as ATI, but the bus name is "sm501.i2c"
hw/i2c/aspeed_i2c.c
- This I2C controller has either 14 or 16 (!) different i2c
buses, and it assigns them names "aspeed.i2c.N" for N = 0,1,2,...
The board code mostly seems to use these to wire up various
on-board i2c devices.
Boards: palmetto-bmc, supermicrox11-bmc, ast2500-evb, romulus-bmc,
swift-bmc, sonorapass-bmc, witherspoon-bmc, ast2600-evb,
tacoma-bmc, g220a-bmc, quanta-q71l-bmc, rainier-bmc
hw/i2c/bitbang_i2c.c
- the "GPIO to I2C bridge" device always names its bus "i2c".
Used only on musicpal, which only creates one of these buses.
Boards: musicpal
hw/i2c/exynos4210_i2c.c
- This i2c controller always names its bus "i2c". There are 9
of these controllers on the board, so they all have clashing
names.
Boards: nuri, smdkc210
hw/i2c/i2c_mux_pca954x.c
- This is an i2c multiplexer. All the child buses are named
"i2c-bus". The multiplexer is used by the aspeed and npcm7xx
boards. (There's a programmable way to get at individual
downstream i2c buses despite the name clash; none of the boards
using this multiplexer actually connect any devices downstream of
it yet.)
Boards: palmetto-bmc, supermicrox11-bmc, ast2500-evb, romulus-bmc,
swift-bmc, sonorapass-bmc, witherspoon-bmc, ast2600-evb,
tacoma-bmc, g220a-bmc, quanta-q71l-bmc, rainier-bmc,
npcm750-evb, quanta-gsj, quanta-gbs-bmc, kudo-bmc
hw/i2c/mpc_i2c.c
- This controller always names its bus "i2c". There is only one
of these controllers in the machine.
Boards: ppce500, mpc8544ds
hw/i2c/npcm7xx_smbus.c
- This controller always names its bus "i2c-bus". There are multiple
controllers on the boards. The name also clashes with the one used
by the pca954x muxes on these boards (see above).
Boards: npcm750-evb, quanta-gsj, quanta-gbs-bmc, kudo-bmc
hw/i2c/pm_smbus.c
- This is the PC SMBUS implementation (it is not a QOM device...)
The bus is always called "i2c".
Boards: haven't worked through; at least all the x86 PC-like
boards, I guess
hw/i2c/ppc4xx_i2c.c
- This controller always names its bus "i2c". The taihu and
ref405ep have only one controller, but sam460ex has two which
will have non-unique names.
Boards: taihu, ref405ep, sam460ex
hw/i2c/versatile_i2c.c
- This controller always names its bus "i2c". The MPS boards all
have multiples of this controller with clashing names; the others
have only one controller.
Boards: mps2-an385, mps2-an386, mps2-an500, mps2-an511,
mps2-an505, mps2-an521, mps3-an524, mps3-an547,
realview-eb, realview-eb-mpcore, realview-pb-a8, realview-pbx-a9,
versatileab, versatilepb, vexpress-a9, vexpress-a15
In a lot of these cases I suspect the i2c controllers are
provided either to allow connection of various internal-to-the-board
devices, or simply so that guest OS bootup code that initializes
the i2c controller doesn't fall over. However since there's
nothing stopping users from creating i2c devices themselves
on the commandline, some people might be doing that.
In some of these cases (eg the i2c bus on the ATI VGA driver)
I suspect the desired behaviour is "unique bus name based on
a standard template, eg 'ati-vga.ddc.0/1/...'. It sounds like
we can't do that, though. (Also they probably don't want to
permit users to command-line plug i2c devices into it...)
thanks
-- PMM
