On Fri, 23 Jul 2021 04:05:18 -0400
"Michael S. Tsirkin" <m...@redhat.com> wrote:
> On Fri, Jul 23, 2021 at 09:47:26AM +0200, Igor Mammedov wrote:
> > On Thu, 22 Jul 2021 13:49:34 -0400
> > "Michael S. Tsirkin" <m...@redhat.com> wrote:
> >
> > > On Thu, Jul 22, 2021 at 06:59:45AM -0400, Igor Mammedov wrote:
> > > > Commit 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on
> > > > Q35)
> > > > switched PCI hotplug from native to ACPI one by default.
> > > >
> > > > That however breaks ihotplug on following CLI that used to work:
> > >
> > > s/ihotplug/hotplug/ ?
> > >
> > > > -nodefaults -machine q35 \
> > > > -device
> > > > pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1
> > > > \
> > > > -device
> > > > pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2
> > > >
> > > > where PCI device is hotplugged to pcie-root-port-1 with error on guest
> > > > side:
> > > >
> > > > ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT],
> > > > AE_NOT_FOUND (20201113/psargs-330)
> > > > ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error
> > > > (AE_NOT_FOUND) (20201113/psparse-531)
> > > > ACPI Error: Aborting method \_GPE._E01 due to previous error
> > > > (AE_NOT_FOUND) (20201113/psparse-531)
> > > > ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_E01]
> > > > (20201113/evgpe-515)
> > > >
> > > > cause is that QEMU's ACPI hotplug never supported functions other then 0
> > > > and due to bug it was generating notification entries for not described
> > > > functions.
> > > >
> > > > Technically there is no reason not to describe cold-plugged bridges
> > > > (root ports) on functions other then 0, as they similaraly to bridge
> > > > on function 0 are unpluggable.
> > > >
> > > > Fix consists of describing cold-plugged bridges[root ports] on functions
> > > > other than 0.
> > >
> > >
> > > I would add: since we need to describe multifunction devices
> >
> > ok
> >
> > >
> > > >
> > > > Fixes: 17858a169508609ca9063c544833e5a1adeb7b52
> > >
> > > use short hash and include subject within ("subject here") please
> > >
> > > > Signed-off-by: Igor Mammedov <imamm...@redhat.com>
> > > > Reported-by: Laurent Vivier <lviv...@redhat.com>
> > > > ---
> > > > hw/i386/acpi-build.c | 31 ++++++++++++++++++++++++-------
> > > > 1 file changed, 24 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> > > > index b40e284b72..77cb7a338a 100644
> > > > --- a/hw/i386/acpi-build.c
> > > > +++ b/hw/i386/acpi-build.c
> > > > @@ -364,7 +364,7 @@ static void build_append_pcihp_notify_entry(Aml
> > > > *method, int slot)
> > > > int32_t devfn = PCI_DEVFN(slot, 0);
> > > >
> > > > if_ctx = aml_if(aml_and(aml_arg(0), aml_int(0x1U << slot), NULL));
> > > > - aml_append(if_ctx, aml_notify(aml_name("S%.02X", devfn),
> > > > aml_arg(1)));
> > > > + aml_append(if_ctx, aml_notify(aml_name("^S%.03X", devfn),
> > > > aml_arg(1)));
> > > > aml_append(method, if_ctx);
> > > > }
> > > >
> > >
> > > why are you adding a parent prefix here? anything wrong with
> > > relying on search rules?
> > > Seems like an unrelated change.
> > it's remnants from time I was trying to figure out
> > why functions weren't visible, I'll drop it.
> >
> >
> > > Also there's always 8 bit in devfn. Why do we need an extra 0?
> > 2 digits hold slot value, like it used to be and
> > the last one to hold function. Basically like it's shown in PCI.FW spec
> > example.
> >
> > but if you prefer to print raw devfn I can change to that,
> > it should work as well.
>
> will make the patch smaller, won't it? we can always change it
> separately to match spec examples more closely.
sure, done
>
> > > > @@ -389,18 +389,26 @@ static void build_append_pci_bus_devices(Aml
> > > > *parent_scope, PCIBus *bus,
> > > > PCIDeviceClass *pc;
> > > > PCIDevice *pdev = bus->devices[devfn];
> > > > int slot = PCI_SLOT(devfn);
> > > > + int func = PCI_FUNC(devfn);
> > > > + /* ACPI spec: 1.0b: Table 6-2 _ADR Object Bus Types, PCI type
> > > > */
> > > > + int adr = slot << 16 | func;
> > > > bool hotplug_enabled_dev;
> > > > bool bridge_in_acpi;
> > > > bool cold_plugged_bridge;
> > > >
> > > > if (!pdev) {
> > > > - if (bsel) { /* add hotplug slots for non present devices */
> > > > + /*
> > > > + * add hotplug slots for non present devices.
> > > > + * hotplug is supported only for non-multifunction device
> > > > + * so generate device description only for function 0
> > > > + */
> > > > + if (bsel && !PCI_FUNC(devfn)) {
> > >
> > > replace with func here and elsewhere?
> >
> > ok
> >
> > >
> > > > if (pci_bus_is_express(bus) && slot > 0) {
> > > > break;
> > > > }
> > > > - dev = aml_device("S%.02X", PCI_DEVFN(slot, 0));
> > > > + dev = aml_device("S%.03X", devfn);
> > > > aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
> > > > - aml_append(dev, aml_name_decl("_ADR", aml_int(slot <<
> > > > 16)));
> > > > + aml_append(dev, aml_name_decl("_ADR", aml_int(adr)));
> > > > method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
> > > > aml_append(method,
> > > > aml_call2("PCEJ", aml_name("BSEL"),
> > > > aml_name("_SUN"))
> > > > @@ -436,9 +444,18 @@ static void build_append_pci_bus_devices(Aml
> > > > *parent_scope, PCIBus *bus,
> > > > continue;
> > > > }
> > > >
> > > > + /*
> > > > + * allow describing coldplugged bridges in ACPI even if they
> > > > are not
> > > > + * on function 0, as they are not unpluggale, for all other
> > > > devices
> > >
> > >
> > > unpluggable
> > >
> > > > + * generate description only for function 0 per slot
> > > > + */
> > > > + if (PCI_FUNC(devfn) && !bridge_in_acpi) {
> > > > + continue;
> > > > + }
> > > > +
> > > > /* start to compose PCI slot descriptor */
> > > > - dev = aml_device("S%.02X", PCI_DEVFN(slot, 0));
> > > > - aml_append(dev, aml_name_decl("_ADR", aml_int(slot << 16)));
> > > > + dev = aml_device("S%.03X", devfn);
> > > > + aml_append(dev, aml_name_decl("_ADR", aml_int(adr)));
> > > >
> > > > if (bsel) {
> > > > /*
> > > > @@ -529,7 +546,7 @@ static void build_append_pci_bus_devices(Aml
> > > > *parent_scope, PCIBus *bus,
> > > > continue;
> > > > }
> > > >
> > > > - aml_append(method, aml_name("^S%.02X.PCNT",
> > > > + aml_append(method, aml_name("^S%.03X.PCNT",
> > > > sec->parent_dev->devfn));
> > > > }
> > > > }
> > > > --
> > > > 2.27.0
> > >
>
