From: Claudio Fontana <cfont...@suse.de> we will need this for KVM too, especially for Nested support.
Signed-off-by: Claudio Fontana <cfont...@suse.de> Reviewed-by: Richard Henderson <richard.hender...@linaro.org> Signed-off-by: Alex Bennée <alex.ben...@linaro.org> --- target/arm/cpu-common.c | 68 +++++++++++++++++++++++++++++++++++++++++ target/arm/tcg/helper.c | 68 ----------------------------------------- 2 files changed, 68 insertions(+), 68 deletions(-) diff --git a/target/arm/cpu-common.c b/target/arm/cpu-common.c index 694e5d73f3..040e06392a 100644 --- a/target/arm/cpu-common.c +++ b/target/arm/cpu-common.c @@ -231,3 +231,71 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, mask &= ~CACHED_CPSR_BITS; env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask); } + +/* + * Return the effective value of HCR_EL2. + * Bits that are not included here: + * RW (read from SCR_EL3.RW as needed) + */ +uint64_t arm_hcr_el2_eff(CPUARMState *env) +{ + uint64_t ret = env->cp15.hcr_el2; + + if (!arm_is_el2_enabled(env)) { + /* + * "This register has no effect if EL2 is not enabled in the + * current Security state". This is ARMv8.4-SecEL2 speak for + * !(SCR_EL3.NS==1 || SCR_EL3.EEL2==1). + * + * Prior to that, the language was "In an implementation that + * includes EL3, when the value of SCR_EL3.NS is 0 the PE behaves + * as if this field is 0 for all purposes other than a direct + * read or write access of HCR_EL2". With lots of enumeration + * on a per-field basis. In current QEMU, this is condition + * is arm_is_secure_below_el3. + * + * Since the v8.4 language applies to the entire register, and + * appears to be backward compatible, use that. + */ + return 0; + } + + /* + * For a cpu that supports both aarch64 and aarch32, we can set bits + * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. + * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. + */ + if (!arm_el_is_aa64(env, 2)) { + uint64_t aa32_valid; + + /* + * These bits are up-to-date as of ARMv8.6. + * For HCR, it's easiest to list just the 2 bits that are invalid. + * For HCR2, list those that are valid. + */ + aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); + aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); + ret &= aa32_valid; + } + + if (ret & HCR_TGE) { + /* These bits are up-to-date as of ARMv8.6. */ + if (ret & HCR_E2H) { + ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | + HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | + HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | + HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | + HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | + HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); + } else { + ret |= HCR_FMO | HCR_IMO | HCR_AMO; + } + ret &= ~(HCR_SWIO | HCR_PTW | HCR_VF | HCR_VI | HCR_VSE | + HCR_FB | HCR_TID1 | HCR_TID3 | HCR_TSC | HCR_TACR | + HCR_TSW | HCR_TTLB | HCR_TVM | HCR_HCD | HCR_TRVM | + HCR_TLOR); + } + + return ret; +} diff --git a/target/arm/tcg/helper.c b/target/arm/tcg/helper.c index d32f9659bc..e85e2bfed9 100644 --- a/target/arm/tcg/helper.c +++ b/target/arm/tcg/helper.c @@ -261,74 +261,6 @@ static int arm_gdb_set_svereg(CPUARMState *env, uint8_t *buf, int reg) } #endif /* TARGET_AARCH64 */ -/* - * Return the effective value of HCR_EL2. - * Bits that are not included here: - * RW (read from SCR_EL3.RW as needed) - */ -uint64_t arm_hcr_el2_eff(CPUARMState *env) -{ - uint64_t ret = env->cp15.hcr_el2; - - if (!arm_is_el2_enabled(env)) { - /* - * "This register has no effect if EL2 is not enabled in the - * current Security state". This is ARMv8.4-SecEL2 speak for - * !(SCR_EL3.NS==1 || SCR_EL3.EEL2==1). - * - * Prior to that, the language was "In an implementation that - * includes EL3, when the value of SCR_EL3.NS is 0 the PE behaves - * as if this field is 0 for all purposes other than a direct - * read or write access of HCR_EL2". With lots of enumeration - * on a per-field basis. In current QEMU, this is condition - * is arm_is_secure_below_el3. - * - * Since the v8.4 language applies to the entire register, and - * appears to be backward compatible, use that. - */ - return 0; - } - - /* - * For a cpu that supports both aarch64 and aarch32, we can set bits - * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. - * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. - */ - if (!arm_el_is_aa64(env, 2)) { - uint64_t aa32_valid; - - /* - * These bits are up-to-date as of ARMv8.6. - * For HCR, it's easiest to list just the 2 bits that are invalid. - * For HCR2, list those that are valid. - */ - aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); - aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | - HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); - ret &= aa32_valid; - } - - if (ret & HCR_TGE) { - /* These bits are up-to-date as of ARMv8.6. */ - if (ret & HCR_E2H) { - ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | - HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | - HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | - HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | - HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | - HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); - } else { - ret |= HCR_FMO | HCR_IMO | HCR_AMO; - } - ret &= ~(HCR_SWIO | HCR_PTW | HCR_VF | HCR_VI | HCR_VSE | - HCR_FB | HCR_TID1 | HCR_TID3 | HCR_TSC | HCR_TACR | - HCR_TSW | HCR_TTLB | HCR_TVM | HCR_HCD | HCR_TRVM | - HCR_TLOR); - } - - return ret; -} - /* Return the exception level to which exceptions should be taken * via SVEAccessTrap. If an exception should be routed through * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should -- 2.20.1