In 2005 the author of commit daa579632d "PS2 mouse and keyboard separation (Paul Brook)" and 0e43e99c04 "PS2 mouse and keyboard separation (Paul Brook)" separated the PS/2 controller code and the PS/2 keyboard and mouse code. It seems he forgot to remove a few defines. Remove them now.
Signed-off-by: Volker Rümelin <vr_q...@t-online.de> --- hw/input/pckbd.c | 37 ------------------------------------- 1 file changed, 37 deletions(-) diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c index 7c476f7a3e..a386457187 100644 --- a/hw/input/pckbd.c +++ b/hw/input/pckbd.c @@ -61,21 +61,6 @@ #define KBD_CCMD_RESET 0xFE /* Pulse bit 0 of the output port P2 = CPU reset. */ #define KBD_CCMD_NO_OP 0xFF /* Pulse no bits of the output port P2. */ -/* Keyboard Commands */ -#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ -#define KBD_CMD_ECHO 0xEE -#define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */ -#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ -#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ -#define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */ -#define KBD_CMD_RESET_ENABLE 0xF6 /* reset and enable scanning */ -#define KBD_CMD_RESET 0xFF /* Reset */ - -/* Keyboard Replies */ -#define KBD_REPLY_POR 0xAA /* Power on reset */ -#define KBD_REPLY_ACK 0xFA /* Command ACK */ -#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ - /* Status Register Bits */ #define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ #define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ @@ -108,28 +93,6 @@ */ #define KBD_OUT_ONES 0xcc -/* Mouse Commands */ -#define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ -#define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ -#define AUX_SET_RES 0xE8 /* Set resolution */ -#define AUX_GET_SCALE 0xE9 /* Get scaling factor */ -#define AUX_SET_STREAM 0xEA /* Set stream mode */ -#define AUX_POLL 0xEB /* Poll */ -#define AUX_RESET_WRAP 0xEC /* Reset wrap mode */ -#define AUX_SET_WRAP 0xEE /* Set wrap mode */ -#define AUX_SET_REMOTE 0xF0 /* Set remote mode */ -#define AUX_GET_TYPE 0xF2 /* Get type */ -#define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ -#define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ -#define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ -#define AUX_SET_DEFAULT 0xF6 -#define AUX_RESET 0xFF /* Reset aux device */ -#define AUX_ACK 0xFA /* Command byte ACK. */ - -#define MOUSE_STATUS_REMOTE 0x40 -#define MOUSE_STATUS_ENABLED 0x20 -#define MOUSE_STATUS_SCALE21 0x10 - #define KBD_PENDING_KBD_V3 0x01 #define KBD_PENDING_AUX_V3 0x02 #define KBD_PENDING_CTRL_KBD 0x04 -- 2.26.2
