On 3/11/21 2:55 PM, G S Niteesh Babu wrote:
> Signed-off-by: G S Niteesh Babu <niteesh...@gmail.com>
> ---
> hw/avr/Kconfig | 1 +
> hw/avr/arduino.c | 15 +++++++++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> index 16a57ced11..e0d4fc5537 100644
> --- a/hw/avr/Kconfig
> +++ b/hw/avr/Kconfig
> @@ -8,3 +8,4 @@ config AVR_ATMEGA_MCU
> config ARDUINO
> select AVR_ATMEGA_MCU
> select UNIMP
> + select LED
> diff --git a/hw/avr/arduino.c b/hw/avr/arduino.c
> index 3c8388490d..5cdba3201c 100644
> --- a/hw/avr/arduino.c
> +++ b/hw/avr/arduino.c
> @@ -13,6 +13,7 @@
> #include "qemu/osdep.h"
> #include "qapi/error.h"
> #include "hw/boards.h"
> +#include "hw/misc/led.h"
> #include "atmega.h"
> #include "boot.h"
> #include "qom/object.h"
> @@ -22,6 +23,8 @@ struct ArduinoMachineState {
> MachineState parent_obj;
> /*< public >*/
> AtmegaMcuState mcu;
> +
> + LEDState *onboard_led;
> };
> typedef struct ArduinoMachineState ArduinoMachineState;
>
> @@ -49,6 +52,18 @@ static void arduino_machine_init(MachineState *machine)
> amc->xtal_hz, &error_abort);
> sysbus_realize(SYS_BUS_DEVICE(&ams->mcu), &error_abort);
>
> + ams->onboard_led = led_create_simple(OBJECT(ams),
> + GPIO_POLARITY_ACTIVE_HIGH,
> + LED_COLOR_BLUE,
> + "D13 LED");
> +
> + /* TODO: Add macro or function to map pins to ports */
> + /* The onboard led is connected to PIN 13 in all boards currently
> supported
Yes,
> + * in QEMU. And PIN 13 is mapped to PORT B BIT 5.
No. Only on the Duemilanove / UNO. On both Mega it is bit 7.
> + */
> + qdev_connect_gpio_out(DEVICE(&ams->mcu.gpio[1]), 5,
> + qdev_get_gpio_in(DEVICE(ams->onboard_led), 0));
> +
> if (machine->firmware) {
> if (!avr_load_firmware(&ams->mcu.cpu, machine,
> &ams->mcu.flash, machine->firmware)) {
>
