From: Frank Chang <frank.ch...@sifive.com> This patchset implements the vector extension v1.0 for RISC-V on QEMU.
As vector extension specification is near to be ratified, this patchset is sent as formal patchset for review. The port is available here: https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v6 You can change the cpu argument: vext_spec to v1.0 (i.e. vext_spec=v1.0) to run with RVV v1.0 instructions. Note: This patchset depends on another patchset listed in Based-on section below so it might not able to be built unless the patchset is applied. Changelog: v6 * add vector floating-point reciprocal estimate instruction. * add vector floating-point reciprocal square-root estimate instruction. * update check rules for segment register groups, each segment register group has to follow overlap rules. * update viota.m instruction check rules. v5 * refactor RVV v1.0 check functions. (Thanks to Richard Henderson's bitwise tricks.) * relax RV_VLEN_MAX to 1024-bits. * implement vstart CSR's behaviors. * trigger illegal instruction exception if frm is not valid for vector floating-point instructions. * rebase on riscv-to-apply.next. v4 * remove explicit float flmul variable in DisasContext. * replace floating-point calculations with shift operations to improve performance. * relax RV_VLEN_MAX to 512-bits. v3 * apply nan-box helpers from Richard Henderson. * remove fp16 api changes as they are sent independently in another pathcset by Chih-Min Chao. * remove all tail elements clear functions as tail elements can retain unchanged for either VTA set to undisturbed or agnostic. * add fp16 nan-box check generator function. * add floating-point rounding mode enum. * replace flmul arithmetic with shifts to avoid floating-point conversions. * add Zvqmac extension. * replace gdbstub vector register xml files with dynamic generator. * bumped to RVV v1.0. * RVV v1.0 related changes: * add vl<nf>re<eew>.v and vs<nf>r.v vector whole register load/store instructions * add vrgatherei16 instruction. * rearranged bits in vtype to make vlmul bits into a contiguous field. v2 * drop v0.7.1 support. * replace invisible return check macros with functions. * move mark_vs_dirty() to translators. * add SSTATUS_VS flag for s-mode. * nan-box scalar fp register for floating-point operations. * add gdbstub files for vector registers to allow system-mode debugging with GDB. Based-on: <1596102747-20226-1-git-send-email-chihmin.c...@sifive.com/> Frank Chang (66): target/riscv: drop vector 0.7.1 and add 1.0 support target/riscv: Use FIELD_EX32() to extract wd field target/riscv: rvv-1.0: introduce writable misa.v field target/riscv: rvv-1.0: add translation-time vector context status target/riscv: rvv-1.0: remove rvv related codes from fcsr registers target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr registers target/riscv: rvv-1.0: remove MLEN calculations target/riscv: rvv-1.0: add fractional LMUL target/riscv: rvv-1.0: add VMA and VTA target/riscv: rvv-1.0: update check functions target/riscv: introduce more imm value modes in translator functions target/riscv: rvv:1.0: add translation-time nan-box helper function target/riscv: rvv-1.0: configure instructions target/riscv: rvv-1.0: stride load and store instructions target/riscv: rvv-1.0: index load and store instructions target/riscv: rvv-1.0: fix address index overflow bug of indexed load/store insns target/riscv: rvv-1.0: fault-only-first unit stride load target/riscv: rvv-1.0: amo operations target/riscv: rvv-1.0: load/store whole register instructions target/riscv: rvv-1.0: update vext_max_elems() for load/store insns target/riscv: rvv-1.0: take fractional LMUL into vector max elements calculation target/riscv: rvv-1.0: floating-point square-root instruction target/riscv: rvv-1.0: floating-point classify instructions target/riscv: rvv-1.0: mask population count instruction target/riscv: rvv-1.0: find-first-set mask bit instruction target/riscv: rvv-1.0: set-X-first mask bit instructions target/riscv: rvv-1.0: iota instruction target/riscv: rvv-1.0: element index instruction target/riscv: rvv-1.0: allow load element with sign-extended target/riscv: rvv-1.0: register gather instructions target/riscv: rvv-1.0: integer scalar move instructions target/riscv: rvv-1.0: floating-point move instruction target/riscv: rvv-1.0: floating-point scalar move instructions target/riscv: rvv-1.0: whole register move instructions target/riscv: rvv-1.0: integer extension instructions target/riscv: rvv-1.0: single-width averaging add and subtract instructions target/riscv: rvv-1.0: single-width bit shift instructions target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow target/riscv: rvv-1.0: narrowing integer right shift instructions target/riscv: rvv-1.0: widening integer multiply-add instructions target/riscv: rvv-1.0: single-width saturating add and subtract instructions target/riscv: rvv-1.0: integer comparison instructions target/riscv: rvv-1.0: floating-point compare instructions target/riscv: rvv-1.0: mask-register logical instructions target/riscv: rvv-1.0: slide instructions target/riscv: rvv-1.0: floating-point slide instructions target/riscv: rvv-1.0: narrowing fixed-point clip instructions target/riscv: rvv-1.0: single-width floating-point reduction target/riscv: rvv-1.0: widening floating-point reduction instructions target/riscv: rvv-1.0: single-width scaling shift instructions target/riscv: rvv-1.0: remove widening saturating scaled multiply-add target/riscv: rvv-1.0: remove vmford.vv and vmford.vf target/riscv: rvv-1.0: remove integer extract instruction target/riscv: rvv-1.0: floating-point min/max instructions target/riscv: introduce floating-point rounding mode enum target/riscv: rvv-1.0: floating-point/integer type-convert instructions target/riscv: rvv-1.0: widening floating-point/integer type-convert target/riscv: add "set round to odd" rounding mode helper function target/riscv: rvv-1.0: narrowing floating-point/integer type-convert target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits target/riscv: rvv-1.0: implement vstart CSR target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not valid target/riscv: rvv-1.0: set mstatus.SD bit when writing vector CSRs target/riscv: rvv-1.0: floating-point reciprocal square-root estimate instruction target/riscv: rvv-1.0: floating-point reciprocal estimate instruction target/riscv: set mstatus.SD bit when writing fp CSRs Greentime Hu (1): target/riscv: rvv-1.0: add vlenb register Hsiangkai Wang (2): target/riscv: gdb: modify gdb csr xml file to align with csr register map target/riscv: gdb: support vector registers for rv64 & rv32 LIU Zhiwei (3): target/riscv: rvv-1.0: add mstatus VS field target/riscv: rvv-1.0: add sstatus VS field target/riscv: rvv-1.0: add vcsr register gdb-xml/riscv-32bit-csr.xml | 18 +- gdb-xml/riscv-64bit-csr.xml | 18 +- target/riscv/cpu.c | 11 +- target/riscv/cpu.h | 98 +- target/riscv/cpu_bits.h | 10 + target/riscv/cpu_helper.c | 15 +- target/riscv/csr.c | 85 +- target/riscv/fpu_helper.c | 17 +- target/riscv/gdbstub.c | 177 +- target/riscv/helper.h | 503 ++- target/riscv/insn32-64.decode | 18 +- target/riscv/insn32.decode | 290 +- target/riscv/insn_trans/trans_rvv.c.inc | 2475 ++++++++++----- target/riscv/internals.h | 24 +- target/riscv/translate.c | 72 +- target/riscv/vector_helper.c | 3690 ++++++++++++----------- 16 files changed, 4531 insertions(+), 2990 deletions(-) -- 2.17.1
