[PATCH 09/22] hw/sd: ssi-sd: Use macros for the dummy value and tokens in the transfer

[Bin Meng]

From: Bin Meng <bin.m...@windriver.com>

At present the codes use hardcoded numbers (0xff/0xfe) for the dummy
value and block start token. Replace them with macros, and add more
tokens for multiple block write.

Signed-off-by: Bin Meng <bin.m...@windriver.com>
---

 hw/sd/ssi-sd.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index 889260bd8f..8eb48550cf 100644
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -78,6 +78,18 @@ OBJECT_DECLARE_SIMPLE_TYPE(ssi_sd_state, SSI_SD)
 #define SSI_SDR_ADDRESS_ERROR   0x2000
 #define SSI_SDR_PARAMETER_ERROR 0x4000
 
+/* reading and writing blocks start with these tokens and end with crc16 */
+
+/* multiple block write */
+#define SSI_TOKEN_MULTI_WRITE   0xfc
+/* terminate multiple block write */
+#define SSI_TOKEN_STOP_TRAN     0xfd
+/* single block read/write, multiple block read */
+#define SSI_TOKEN_SINGLE        0xfe
+
+/* dummy value - don't care */
+#define SSI_DUMMY               0xff
+
 static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val)
 {
     ssi_sd_state *s = SSI_SD(dev);
@@ -91,14 +103,14 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, 
uint32_t val)
 
     switch (s->mode) {
     case SSI_SD_CMD:
-        if (val == 0xff) {
+        if (val == SSI_DUMMY) {
             DPRINTF("NULL command\n");
-            return 0xff;
+            return SSI_DUMMY;
         }
         s->cmd = val & 0x3f;
         s->mode = SSI_SD_CMDARG;
         s->arglen = 0;
-        return 0xff;
+        return SSI_DUMMY;
     case SSI_SD_CMDARG:
         if (s->arglen == 4) {
             SDRequest request;
@@ -173,14 +185,14 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, 
uint32_t val)
         } else {
             s->cmdarg[s->arglen++] = val;
         }
-        return 0xff;
+        return SSI_DUMMY;
     case SSI_SD_PREP_RESP:
         s->mode = SSI_SD_RESPONSE;
-        return 0xff;
+        return SSI_DUMMY;
     case SSI_SD_RESPONSE:
         if (s->stopping) {
             s->stopping = 0;
-            return 0xff;
+            return SSI_DUMMY;
         }
         if (s->response_pos < s->arglen) {
             DPRINTF("Response 0x%02x\n", s->response[s->response_pos]);
@@ -193,12 +205,12 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, 
uint32_t val)
             DPRINTF("End of command\n");
             s->mode = SSI_SD_CMD;
         }
-        return 0xff;
+        return SSI_DUMMY;
     case SSI_SD_DATA_START:
         DPRINTF("Start read block\n");
         s->mode = SSI_SD_DATA_READ;
         s->response_pos = 0;
-        return 0xfe;
+        return SSI_TOKEN_SINGLE;
     case SSI_SD_DATA_READ:
         val = sdbus_read_byte(&s->sdbus);
         s->read_bytes++;
@@ -225,7 +237,7 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, 
uint32_t val)
         return val;
     }
     /* Should never happen.  */
-    return 0xff;
+    return SSI_DUMMY;
 }
 
 static int ssi_sd_post_load(void *opaque, int version_id)
-- 
2.25.1