On Mon, Oct 26, 2020 at 5:08 AM Philippe Mathieu-Daudé <f4...@amsat.org> wrote:
>
> On 10/25/20 2:14 PM, John Wang wrote:
> > Largely inspired by the TMP421 temperature sensor, here is a model for
> > the EMC1413/EMC1414 temperature sensors.
> >
> > Specs can be found here :
> > http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf
> >
> > Signed-off-by: John Wang <wangzhiqiang...@bytedance.com>
> > ---
> > v3:
> > - update the link to the spec
> > - Rename emc1413.c to emc141x.c
> > - Add sensors_count in EMC141XClass
> > - Make emc1413_read/write easier to review :)
>
> Thanks for the update.
>
> > v2:
> > - Remove DeviceInfo
> > - commit message: TMP423 -> TMP421
> > ---
> > hw/arm/Kconfig | 1 +
> > hw/misc/Kconfig | 4 +
> > hw/misc/emc141x.c | 347 ++++++++++++++++++++++++++++++++++++++++++++
> > hw/misc/meson.build | 1 +
> > 4 files changed, 353 insertions(+)
> > create mode 100644 hw/misc/emc141x.c
> >
> > diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> > index 7d040827af..3dd651a236 100644
> > --- a/hw/arm/Kconfig
> > +++ b/hw/arm/Kconfig
> > @@ -403,6 +403,7 @@ config ASPEED_SOC
> > select SSI_M25P80
> > select TMP105
> > select TMP421
> > + select EMC141X
> > select UNIMP
> >
> > config MPS2
> > diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
> > index 3185456110..169d087d3d 100644
> > --- a/hw/misc/Kconfig
> > +++ b/hw/misc/Kconfig
> > @@ -13,6 +13,10 @@ config TMP421
> > bool
> > depends on I2C
> >
> > +config EMC141X
> > + bool
> > + depends on I2C
> > +
> > config ISA_DEBUG
> > bool
> > depends on ISA_BUS
> > diff --git a/hw/misc/emc141x.c b/hw/misc/emc141x.c
> > new file mode 100644
> > index 0000000000..a2bce74719
> > --- /dev/null
> > +++ b/hw/misc/emc141x.c
> > @@ -0,0 +1,347 @@
> > +/*
> > + * SMSC EMC141X temperature sensor.
> > + *
> > + * Copyright (c) 2020 Bytedance Corporation
> > + * Written by John Wang <wangzhiqiang...@bytedance.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 or
> > + * (at your option) version 3 of the License.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/i2c/i2c.h"
> > +#include "migration/vmstate.h"
> > +#include "qapi/error.h"
> > +#include "qapi/visitor.h"
> > +#include "qemu/module.h"
> > +#include "qom/object.h"
> > +
> > +#define EMC1413_DEVICE_ID 0x21
> > +#define EMC1414_DEVICE_ID 0x25
> > +#define MANUFACTURER_ID 0x5d
> > +#define REVISION 0x04
> > +
> > +#define SENSORS_COUNT_MAX 4
> > +
> > +struct EMC141XState {
> > + I2CSlave i2c;
>
> The QOM style name is 'parent_obj':
>
> I2CSlave parent_obj;
will fix
>
> > + uint8_t temperature[SENSORS_COUNT_MAX];
>
> What is the unit?
>
> > + uint8_t min[SENSORS_COUNT_MAX];
> > + uint8_t max[SENSORS_COUNT_MAX];
>
> min/max what? Temperature?
>
> What about (if the unit is milli Celsius):
>
> struct {
> uint8_t temp_min_mC;
> uint8_t temp_current_mC;
> uint8_t temp_max_mC;
> } sensor[SENSORS_COUNT_MAX];
>
> Looking at the datasheet chapter 6.8 "Temperature Measurement
> Results and Data", it isn't in milli Celsius. See below in
> emc141x_get_temperature().
>
> So maybe:
>
> struct {
> uint8_t raw_temp_min;
> uint8_t raw_temp_current;
> uint8_t raw_temp_max;
> } sensor[SENSORS_COUNT_MAX];
will fix
>
> > + uint8_t len;
> > + uint8_t data;
> > + uint8_t pointer;
> > +};
> > +
> > +struct EMC141XClass {
> > + I2CSlaveClass parent_class;
> > + uint8_t model;
> > + unsigned sensors_count;
> > +};
> > +
> > +#define TYPE_EMC141X "emc141x"
> > +OBJECT_DECLARE_TYPE(EMC141XState, EMC141XClass, EMC141X)
> > +
> > +
> > +/* the EMC141X registers */
> > +#define EMC141X_TEMP_HIGH0 0x00
> > +#define EMC141X_TEMP_HIGH1 0x01
> > +#define EMC141X_TEMP_HIGH2 0x23
> > +#define EMC141X_TEMP_HIGH3 0x2a
> > +#define EMC141X_TEMP_MAX_HIGH0 0x05
> > +#define EMC141X_TEMP_MIN_HIGH0 0x06
> > +#define EMC141X_TEMP_MAX_HIGH1 0x07
> > +#define EMC141X_TEMP_MIN_HIGH1 0x08
> > +#define EMC141X_TEMP_MAX_HIGH2 0x15
> > +#define EMC141X_TEMP_MIN_HIGH2 0x16
> > +#define EMC141X_TEMP_MAX_HIGH3 0x2c
> > +#define EMC141X_TEMP_MIN_HIGH3 0x2d
> > +#define EMC141X_DEVICE_ID 0xfd
> > +#define EMC141X_MANUFACTURER_ID 0xfe
> > +#define EMC141X_REVISION 0xff
> > +
> > +static void emc141x_get_temperature(Object *obj, Visitor *v, const char
> > *name,
> > + void *opaque, Error **errp)
>
> Nitpicking, align is off ;)
will fix ;)
>
> > +{
> > + EMC141XState *s = EMC141X(obj);
> > + EMC141XClass *sc = EMC141X_GET_CLASS(s);
> > + int64_t value;
> > + int tempid;
>
> Shouldn't it be unsigned?
yep， changed it to unsigned
>
> > +
> > + if (sscanf(name, "temperature%d", &tempid) != 1) {
>
> Format doesn't match. Using 'unsigned' is probably easier (%u).
>
> > + error_setg(errp, "error reading %s: %s", name, g_strerror(errno));
> > + return;
> > + }
> > +
> > + if (tempid >= sc->sensors_count || tempid < 0) {
> > + error_setg(errp, "error reading %s", name);
> > + return;
> > + }
> > +
> > + value = s->temperature[tempid] * 1000;
>
> This is not what is described in "Table 6.2: Temperature Data Format",
> there is an offset and a step multiplier.
The EMC1413/1414 has two selectable temperature ranges. we use the
default one 0 - 127.
as described in Table 7.2
Reg 00(TEMP_HIGH0) represents 0-127
Reg 29(TEMP_LOW0) represents 0 - 7/8(0.875)
I think we could care less about low-bit registers, and linux drivers
don't care either.
https://github.com/openbmc/linux/blob/dev-5.8/drivers/hwmon/emc1403.c#L43-L46
> Which makes me wonder how are you testing this?
I tested it under openbmc/linux.
1. with "aspeed: Add support for the g220a-bmc board" ，build the qemu
2. cd /sys/class/hwmon/hwmon2
3 cat temp1_input cat temp1_max cat temp2_input .... saw that all
values are expected.
> We have very simple tests for the TMP105, see tests/qtest/tmp105-test.c,
> please add a similar test.
will add the UT.
>
> > +
> > + visit_type_int(v, name, &value, errp);
> > +}
> > +
> ...
