On Fri, Aug 21, 2020 at 01:02:59PM +0200, Philippe Mathieu-Daudé wrote: > Hi Edgar, > > On 8/20/20 9:43 PM, Edgar E. Iglesias wrote: > > From: "Edgar E. Iglesias" <edgar.igles...@xilinx.com> > > > > This adds missing device-tree source files for the petalogix boards > > with recompiled DTBs. > > > > Cheers, > > Edgar > > > > Edgar E. Iglesias (2): > > microblaze: petalogix-ml605: Add device-tree source > > microblaze: petalogix-s3adsp1800: Add device-tree source > > > > pc-bios/petalogix-ml605.dtb | Bin 9982 -> 9882 bytes > > pc-bios/petalogix-ml605.dts | 350 +++++++++++++++++++++++++++++++ > > pc-bios/petalogix-s3adsp1800.dtb | Bin 8259 -> 8161 bytes > > pc-bios/petalogix-s3adsp1800.dts | 282 +++++++++++++++++++++++++ > > 4 files changed, 632 insertions(+) > > create mode 100644 pc-bios/petalogix-ml605.dts > > create mode 100644 pc-bios/petalogix-s3adsp1800.dts > > > > I suppose the test_microblaze_s3adsp1800() test in > tests/acceptance/boot_linux_console.py has the dtb embedded after the > kernel.
Not sure, but I'll see if I can figure it out. > > Do you mind adding another test explicitly using this dtb? > That would cover any further changes in these files. Sounds like a good idea! Thanks, Edgar > > Also, can you add a test for the kc705 EVB (and previous) > boards as you suggested here? > https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html > > I already added a test for the cris/etraxfs board, will send > it soon. Well you might wait for it and use it as template too. > > Anyway, > Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org> >
